journal article·2022-09

Investigation into the mechanical behavior of a polymer optical fiber embedded in a structural adhesive

J. Weiland, W. Bartholomee, M. Luber, A. Schiebahn, R. Engelbrecht, U. Reisgen

Publisher page

Abstract

Abstract To guaranty a safe load transfer through adhesively bonded joints, Structural Health Monitoring (SHM) methods that allow for permanent monitoring of the structural bond condition, are becoming more and more important. To meet this increasing demand, a novel approach for SHM of adhesively bonded joints by use of integrated Polymer Optical Fibers (POF) has been demonstrated in previous work. The sensor operating principle is based on strain transfer from the structural adhesive to the integrated POF. This strain transfer leads to a deformation of the POF cross-sectional shape and in that way affects the optical light propagation in the POF. In the current work, numerical and experimental results are presented into the mechanical behavior of embedded POF in adhesive bulk specimens subjected to tensile loading. Local deformations of both the POF (Asahi Kasei DB 500) and the structural adhesive (3 M Scotch Weld DP410) are evaluated using Digital Image Correlation (DIC). In the loading direction, a linear correlation is shown between strain inside the POF core and strain of the surrounding adhesive. Tests results, as well as fracture analysis, show a highly ductile behavior and failure of the POF cladding material and the interface between the POF core and annular cladding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Fiber Optic Sensors · Semiconductor Lasers and Optical Devices · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. DIN-Normenausschuss Schweißen und verwandte Verfahren · 2016
2. Die neue DIN 2304 und ihr Nutzen für die Praxis10.1007/s35145-015-0550-1 ↗
3. Bond line monitoring technology for aircraft CFRP structure using Lamb wave
4. Structural health monitoring of an adhesively bonded CFRP aircraft fuselage by ultrasonic Lamb Waves
5. Damage detection in adhesively bonded single lap joints by using backface strain: Proposing a new position for backface strain gauges10.1016/j.ijadhadh.2019.102494 ↗
6. Analysis of back-face strain measurement for adhesively bonded single lap joints using strain gauge, Digital Image Correlation and finite element method10.1016/j.ijadhadh.2019.102491 ↗
7. Fatigue crack growth monitoring in composite bonded lap joints by a distributed fibre optic sensing system and comparison with ultrasonic testing10.1080/00218464.2015.1123153 ↗
8. Den Zustand von Klebungen kontinuierlich im Blick10.1365/s35145-014-0626-3 ↗
9. Adhesive Disbond monitoring with microstructured optical fiber Bragg grating sensors
10. Hildebrand · 2013
11. Hildebrand · 2015
12. Disbond monitoring in adhesive joints using shear stress optical fiber sensors10.1088/0964-1726/23/7/075006 ↗
13. Shear stress sensing with Bragg grating-based sensors in microstructured optical fibers10.1364/OE.21.020404 ↗
14. An evaluation of a novel plastic optical fibre sensor for axial strain and bend measurements10.1088/0957-0233/13/10/303 ↗
15. Crack detection and vertical deflection monitoring in concrete beams using plastic optical fibre sensors10.1088/0957-0233/14/2/308 ↗
16. Polymer optical fiber sensors in structural health monitoring
17. Detection of transverse cracks by embedded plastic optical fiber in FRP laminates
18. Structural health monitoring of adhesively bonded joints: Proposing a new method by use of polymer optical fibers10.1016/j.prostr.2020.11.106 ↗
19. DIN-Normenausschuss Kunststoffe · 2019
20. DIN-Normenausschuss Kunststoffe · 1997
21. Gebhardt · 2014
22. Brown
23. Engelbrecht · 2014