Effect of thermal aging on the mechanical performance of timber-timber single-lap adhesive joints
Source abstract
Abstract
Abstract Timber is a natural material traditionally used in the building industry. In the last decades, developments in scientific research have made timber a high-tech building material. In the field of timber engineering, recent developments concerned advances in the study of adhesive joints and their applications in the field of structures. The growing interest in adhesive joints in timber structures is due to the advantages offered by adhesive technology over traditional mechanical joining techniques. In this paper, the effect of exposure of adhesive joints between timber adherends to high values of temperature and relative humidity is investigated. In particular, two different two-component (2K) epoxy adhesives (EPX1, EPX2) and one polyurethane (PU) in single-lap adhesive joints between mahogany and pine adherends have been used and compared. This research work investigates the possibility of realising new joints between timber adherends in innovative building components (e.g. windows and curtain walls). The results obtained from the experimental campaign showed that PU adhesive has lower mechanical performance than epoxy adhesives, regardless of the aging condition. On the other hand, the epoxy adhesives tested showed high performance and different mechanical behavior after artificial aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Mechanical Behavior of Composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. 2011
2. Ductile double-lap joints from brittle GFRP laminates and ductile adhesives, Part I: experimental investigation10.1016/j.compositesb.2007.02.015 ↗
3. Ductile double-lap joints from brittle GFRP laminates and ductile adhesives, Part II: numerical investigation and joint strength prediction10.1016/j.compositesb.2007.02.016 ↗
4. Mechanical behaviour of double side high performance PSA adhesive applied to painted naval structures10.1016/j.polymertesting.2020.106894 ↗
5. Stress distribution in double-lap adhesive joints: effect of adherend reinforcement layer10.1016/j.ijadhadh.2020.102780 ↗
6. ‘Glass, timber and adhesive joints – innovative load bearing building components’10.1016/j.conbuildmat.2014.01.045 ↗
7. Load-carrying capacity of timber joints with multiple glued-in steel rods loaded parallel to grain10.1016/j.engstruct.2020.111302 ↗
8. Rods glued in engineered hardwood products part I: experimental results under quasi-static loading10.1016/j.ijadhadh.2018.05.003 ↗
9. ‘Adhesively bonded connections in the context of timber engineering – a Review’10.1080/00218464.2015.1071255 ↗
10. Experimental and numerical investigations on adhesively bonded timber joints10.1007/s00226-011-0423-1 ↗
11. Influence of stress-reduction methods on the strength of adhesively bonded joints composed of orthotropic brittle adherends10.1016/j.ijadhadh.2010.05.007 ↗
12. Experimental and numerical investigations on full-scale adhesively bonded timber trusses10.1617/s11527-011-9735-8 ↗
13. Bond line models of glued wood-to-steel plate joints10.1016/j.engstruct.2016.04.053 ↗
14. International Journal of Adhesion and Adhesives Evaluation of a structural epoxy adhesive for timber-glass bonds under shear loading and different environmental conditions10.1016/j.ijadhadh.2019.102425 ↗
15. Timber-concrete-composite with an adhesive connector (wet on wet process)10.1617/s11527-006-9154-4 ↗
16. Hybrid adhesively bonded timber-concrete-composite floors10.1016/j.ijadhadh.2019.102490 ↗
17. ‘Adhesive-bonded timber-concrete composites – experimental and numerical investigation of hygrothermal effects’10.1016/j.engstruct.2016.05.056 ↗
18. Cruz · 2008 · 439
19. Influence of thermal reactive crosslinking agents on the tack, peel adhesion, and shear strength of acrylic pressure-sensitive adhesives10.1016/j.polymertesting.2020.106603 ↗
20. Mechanical, thermal properties and stability of high renewable content liquefied residual biomass derived bio-polyurethane wood adhesives10.1016/j.ijadhadh.2020.102618 ↗
21. A review on the temperature and moisture degradation of adhesive joints
22. The effect of temperature on the strength of adhesive joints10.1016/0143-7496(92)90052-W ↗
23. Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications10.1080/01694243.2012.697388 ↗
24. Effect of hygrothermal aging and cyclic thermal shocks on the mechanical performance of single-lap adhesive joints10.1016/j.ijadhadh.2020.102584 ↗
25. Adhesive systems for structural connections in timber10.1016/S0143-7496(00)00049-X ↗
26. Joints with bars glued-in softwood laminated timber subjected to climatic cycles10.1016/j.ijadhadh.2017.12.010 ↗
27. Adhesively bonded hardwood joints under room temperature and elevated temperatures10.1080/00218464.2013.836968 ↗
28. Design and dimensioning of a complex timber-glass hybrid structure: the IFAM pedestrian bridge10.1007/s40940-016-0007-4 ↗
29. The effect of adhesive type and ply number on the compressive strength retention of CLT at elevated temperatures10.1016/j.conbuildmat.2020.121156 ↗
30. Influence of moistuire, temperature and load duration on performance of glued-in rods
31. Effect of moisture content and temperature on tension strength of fingerjointed black spruce lumber
32. ASTM D3528-16, ‘Standard test method for strength properties of double lap shear adhesive joints by tension loading’. .
33. Mechanical performances of GFRP-steel specimens bonded with different epoxy adhesives, before and after the aging treatments10.1016/j.compstruct.2017.03.020 ↗
34. 2003
35. 2005
36. Standard practice for classifying failure modes in fiber-reinforced-plastic (FRP) joints