Prediction of the macroscopic fracture toughness of a composite/adhesive interface with periodic surface microstructures
Source abstract
Abstract
Abstract We developed a formula for predicting the macroscopic fracture toughness of a composite/adhesive interface with periodic surface microstructures. The formula is an expression of the total energy consumption along the interface averaged by the macroscopic crack length. The formula takes the effect of the crack kinking energy into consideration to compensate for the difference between the otherwise predicted consumed energy and that determined by finite element (FE) analysis. The predictions of the developed formula indicate that the macroscopic fracture toughness increases with increasing aspect ratio and decreases with decreasing height of the microstructures, which is in agreement with the findings of our previous studies on crack growth analysis using a cohesive zone model. The validity of the formula was investigated using microstructures of various shapes and sizes, and good agreement was observed between its predictions and the results of FE analyses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Adhesion, Friction, and Surface Interactions · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Schliekelmann · 1969
2. Adhesive bonding: science
3. Michael · 1999
4. Miyairi · 2006
5. Influence of surface macroroughness on the durability of epoxide-aluminum joints10.1016/0143-7496(95)91628-J ↗
6. The effects of grit-blasting on surface properties for adhesion10.1016/S0143-7496(98)00061-X ↗
7. Effect of surface roughness on the strength of cleavage joints10.1016/S0143-7496(01)00059-8 ↗
8. The influence of adherend topography on the fracture toughness of aluminium-epoxy adhesive joints in humid environments10.1080/00218460108029601 ↗
9. Evaluation of mechanical interlock effect on adhesion strength of polymer–metal interfaces using micro-patterned surface topography10.1016/j.ijadhadh.2010.05.004 ↗
10. Determination of the effective mode-I toughness of a sinusoidal interface between two elastic solids10.1007/s10704-007-9109-y ↗
11. Surface modification by nanoimprint lithography for improvement of the joint strength of composites10.1299/jmmp.4.963 ↗
12. Enhancement of interfacial fracture toughness of carbon/epoxy composite adhesive joints by in-mold surface preparation10.3144/expresspolymlett.2013.26 ↗
13. Mode II interfacial fracture toughness of composite/adhesive interfaces obtained by in-mold surface modification10.1016/j.ijadhadh.2014.01.034 ↗
14. Effects of mixed-mode ratio and step-shaped micro pattern surface on crack-propagation resistance of carbon-fiber-reinforced plastic/adhesive interface10.1016/j.compositesa.2014.11.014 ↗
15. Crack growth analysis of a composite/adhesive interface toughened by in-mold surface preparation10.1016/j.ijadhadh.2013.01.008 ↗
16. Interfacial toughness measurements for thin films on substrates10.1016/S1359-6454(01)00354-8 ↗
17. Imprint of sub-25nm vias and trenches in polymers10.1063/1.114851 ↗
18. Yuuki · 1993
19. A numerical procedure for the simulation of skin–stringer debonding growth in stiffened composite panels10.1016/j.ast.2014.10.003 ↗
20. Failure criteria for mixed mode delamination in glass fibre epoxy composites10.1016/j.compstruct.2009.07.017 ↗
21. Discrete cohesive zone model for mixed-mode fracture using finite element analysis10.1016/j.engfracmech.2006.03.006 ↗
22. Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues10.1002/nme.93 ↗
23. A consideration on the fracture criterion for a sharp notch10.1299/kikaia.64.2574 ↗
24. Crack deflection process–I. theory10.1016/0001-6160(83)90046-9 ↗