journal article·2017-04

Analysis of the adhesively bonded three-point bending specimen for evaluation of adhesive shear behaviour

A.B. de Morais

Publisher page

Abstract

Abstract The adhesive shear stress-strain behaviour is an essential input for the design of structural adhesive joints. Relative to current standard tests, the main advantage of bonded beams is reducing spurious adhesive joint end effects on strength measurements. A beam model was developed in this work for the three-point bending test considering metal adherends, support effects and adhesive elastic-perfectly plastic stress-strain behaviour. Model predictions were in good agreement with finite element analyses for specimens with the thin bondlines typical of structural joints. The present results show that the adhesively bonded three-point bending test can be an interesting approach for the thin bondlines used in structural joints. Nevertheless, there are limitations on the range of measurable properties and data analysis requires models such as the one developed herein.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Adams · 2005
2. Improving joint design using fracture mechanics
3. The measurement of the strength of adhesive and cohesive joints
4. The effects of bond thickness, rate and temperature on the deformation and fracture of structural adhesives under shear loading10.1023/B:FRAC.0000049504.51847.2a ↗
5. Alternative methods to measure the adhesive shear displacement in the thick adherend shear test10.1163/156856108X292241 ↗
6. ISO 11003-1. Adhesives – determination of shear behaviour of structural adhesives – part 1: torsion test method using butt-bonded hollow cylinders. ISO, Geneva, Switzerland; 2001.
7. ASTM D5656-10. Standard test method for thick-adherend metal lap-shear joints for determination of the stress-strain behavior of adhesives in shear by tension loading. ASTM International, West Conshohocken, United States.
8. ISO 11003-2. Adhesives – determination of shear behaviour of structural adhesives – part 2: tensile test method using thick adherends. ISO, Geneva, Switzerland; 2001.
9. Use of the thick adherend shear test for shear stress-strain measurements of stiff and flexible adhesives10.1080/00218460211818 ↗
10. Tomblin · 2002
11. Compact solutions for the corner singularity in bonded lap joints10.1016/S0143-7496(99)00032-9 ↗
12. Influence of adhesive thickness on the behaviour of bonded assemblies under shear loadings using a modified TAST fixture10.1016/j.ijadhadh.2009.11.003 ↗
13. The elastic moduli of structural adhesives
14. New accurate procedure for single shear testing of metals
15. A method for uniform shear stress-strain analysis of adhesives10.1520/JTE12473J ↗
16. Burst B, Adams DO. Investigating the thin-film versus bulk material properties of structural adhesives. Report No. DOT/FAA/AR-06/45, U.S. Department of Transportation, Federal Aviation Administration, Office of Aviation Research and Development, Washington, DC; 2008.
17. A uniform pure shear testing specimen for adhesive characterization
18. A stress concentration-free bonded arcan tensile compression shear test specimen for the evaluation of adhesive mechanical response10.1016/j.ijadhadh.2015.05.003 ↗
19. Grohs · 2007
20. ISO 15166-1:1998. Adhesives – methods of preparing bulk specimens – part 1: two-part systems. ISO, Geneva, Switzerland.
21. ISO 15166-2:2000. Adhesives methods of preparing bulk specimens – part 2: elevated-temperature-curing one-part systems. ISO, Geneva, Switzerland.
22. Modeling and optimization of the sandwich beam specimen in three-point bending for adhesive bond characterization10.1016/j.ijadhadh.2015.12.014 ↗
23. Measuring the shear strength of structural adhesives with bonded beams under antisymmetric bending10.1016/j.ijadhadh.2015.12.033 ↗
24. Measurement of adhesive shear properties by short beam shear test based on higher order beam theory10.1016/j.ijadhadh.2012.08.009 ↗
25. ASTM D2344-13. Standard test method for short-beam strength of polymer matrix composite materials and their laminates. ASTM International, West Conshohocken, United States.
26. Sutton · 2009
27. A method for measurement of multiple constitutive properties for composite materials10.1016/j.compositesa.2012.07.021 ↗
28. Moussiaux · 1987
29. Smith · 1993
30. Analysis of the metal adhesively bonded double cantilever beam specimen10.1016/j.ijadhadh.2015.04.010 ↗