The significance of nanoparticles on bond strength of polymer concrete to steel
Source abstract
Abstract
Abstract Polymer concrete (PC) is a commonly used material in construction due to its improved durability and good bond strength to steel substrate. PC has been suggested as a repair and seal material to restore the bond between the cement annulus and the steel casing in wells that penetrate formations under consideration for CO2 sequestration. Nanoparticles including Multi-Walled Carbon Nano Tubes (MWCNTs), Aluminum Nanoparticles (ANPs) and Silica Nano particles (SNPs) were added to an epoxy-based PC to examine how the nanoparticles affect the bond strength of PC to a steel substrate. Slant shear tests were used to determine the bond strength of PC incorporating nanomaterials to steel; results reveal that PC incorporating nanomaterials has an improved bond strength to steel substrate compared with neat PC. In particular, ANPs improve the bond strength by 51% over neat PC. Local shear stresses, extracted from Finite Element (FE) analysis of the slant shear test, were found to be as much as twice the apparent/average shear/bond strength. These results suggest that the impact of nanomaterials is higher than that shown by the apparent strength. Fourier Transform Infrared (FTIR) measurements of epoxy with and without nanomaterials showed ANPs to influence curing of epoxy, which might explain the improved bond strength of PC incorporating ANPs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. ACI Committee 548, Polymers and Adhesives in Concrete, State of the Art Report, 2009.
2. Ohama · 1995
3. Review of integrity of existing wells in relation to CO2 geological storage: what do we know?10.1016/j.ijggc.2010.11.006 ↗
4. Mechanical properties of nano-MMT reinforced polymer composite and polymer concrete10.1016/j.conbuildmat.2007.02.009 ↗
5. Nano-modified polymer concrete for infrastructure applications10.7813/2075-4124.2014/6-1/A.10 ↗
6. Structural and mechanical properties of polymer nanocomposites10.1016/j.mser.2006.06.001 ↗
7. Impact and wear resistance of polymer nanocomposites at low filler content10.1002/pen.11084 ↗
8. Polymer nanocomposite - fiber model interphases: influence of processing and interface chemistry on mechanical performance10.1016/j.cej.2015.01.093 ↗
9. Toolbox for dispersing carbon nanotubes into polymers to get conductive nanocomposites10.1021/cm051881h ↗
10. Carbon nanotubes: present and future commercial applications10.1126/science.1222453 ↗
11. Influence of carbon nanotubes structure on the mechanical behavior of cement composites10.1016/j.compscitech.2009.05.002 ↗
12. Nanofilled epoxy adhesive for structural aeronautic materials10.1016/j.compositesb.2014.01.032 ↗
13. Epoxy nanocomposites - fracture and toughening mechanisms10.1016/j.engfracmech.2006.05.018 ↗
14. Effect of nano-particles on durability of fiber-reinforced concrete pavement10.1016/j.conbuildmat.2013.07.037 ↗
15. Influence of nanoparticles on durability and mechanical properties of high performance concrete10.1016/j.proeng.2011.07.382 ↗
16. Effect of Glass Fiber Surface Treatments on Mechanical Strength of Epoxy Based Composite Materials10.1006/jcis.2002.8332 ↗
17. Epoxy resin composites with surface‐modified silicon dioxide nanoparticles: a review10.1002/app.39208 ↗
18. Effect of the particle size of nanosilica on the performance of epoxy/silica composite coatings10.1007/s10853-005-0714-8 ↗
19. Comparison of methods for evaluating bond strength between concrete substrate and repair materials10.1016/j.cemconres.2004.05.027 ↗
20. Pocius · 2011
21. The effect of nanoparticles on the adhesion of epoxy adhesive10.1016/j.matlet.2006.02.038 ↗
22. Concrete-to-concrete bond strength10.1016/j.conbuildmat.2004.04.023 ↗
23. A modified slant shear test designed to enforce adhesive failure10.1016/j.conbuildmat.2012.12.053 ↗
24. Improving the dispersion and integration of single-walled carbon nanotubes in epoxy composites through functionalization10.1021/nl0342489 ↗
25. H2SO4/HNO3/HCl—Functionalization and its effect on dispersion of carbon nanotubes in aqueous media10.1016/j.apsusc.2008.07.144 ↗
26. ASTM C882/C882M-13a. Standard test method for bond strength of epoxy-resin systems used with concrete by slant shear. ASTM International, West Conshohocken, PA. 2013.
27. ASTM C469/C469M. Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. ASTM International, West Conshohocken, PA. 2014.
28. Griffiths · 2007
29. Delamination modeling in a double cantilever beam10.1016/j.compstruct.2005.09.026 ↗
30. Interaction of matrix cracking and delamination in cross-ply laminates: simulations with stochastic cohesive zone elements10.1007/s10443-010-9151-1 ↗
31. ABAQUS 6.14 theory manual, ABAQUS online documentation.
32. Abdel Wahab · 2014
33. Studying the influence of nano-Al2O3 particles on the corrosion performance and hydrolytic degredation resistance of an epoxy/polyamide coating of AA-105010.1016/j.porgcoat.2014.04.017 ↗
34. Study the effect of nano-alumina particles on physical-mechanical properties of UV cured epoxy acrylate via nano-indentation10.1016/j.porgcoat.2008.01.015 ↗
35. Bakhshandeha E; Jannesari A; Ranjbar Z; Sobhani S; Reza Saeb M. . Anti-corrosion hybrid coatings based on epoxy–silicanano-composites: Toward relationship between the morphologyand EIS data; Progress in Organic Coatings 77 1169–1183; 2014.10.1016/j.porgcoat.2014.04.005 ↗
36. Temperature-dependent FTIR spectroscopic and thermoanalytic studies of hydrogen bonding of hydroxyl (phenolic group) terminated hyperbranched aromatic polyesters10.1016/j.molstruc.2005.11.020 ↗
37. Paterson · New insights into Liq Cryst Behav Hydrog-Bond mixtures Provid Temp-Depend FTIR Spectrosc · 2015 · 42 · 928
38. Fundamental studies of epoxy resins for can and coil. II. Flexibility and adhesion
39. Formation and structure of the epoxy–silica hybrids10.1016/S0032-3861(98)00214-6 ↗
40. A study on the anticorrosion performance of epoxy nanocomposite coatings containing epoxy-silane treated nano-silica on mild steel substrate10.1016/j.jiec.2014.08.008 ↗