journal article·2011-09

Effects of imperfect adhesion on thermal micro-residual stresses in polymer matrix composites

M.M. Shokrieh, M. Safarabadi

Publisher page

Abstract

This paper investigates the influences of imperfect bonding between the fiber and matrix on thermal micro-residual stress fields in polymer matrix composites. For this purpose, a representative volume element consisting of a three-phase composite material subjected to a uniform temperature change is considered. Based on the energy method, a three-dimensional closed-form solution for micro-residual stresses is obtained. Besides, a finite element model is developed and the results are compared with the analytical solution. Both the energy method and finite element analysis show similar trend for thermal stress distribution along the fiber length, while due to the stress singularity, the interfacial shear stress from the finite element solution cannot satisfy the stress-free condition at the fiber end. The analysis shows that the magnitude of thermal stresses and their distribution mainly depend on the bonding efficiency parameter. An increase in thermal and elastic properties bonding efficiencies leads to a considerable decrease in composite axial and shear residual stresses, while the Poisson's ratio bonding efficiency does not affect the thermal stress fields. The interfacial radial residual stress distribution is approximately independent of the bonding conditions. Inefficient bonding may result in higher residual stresses in comparison with the perfect bonding condition. It means that in cases of low bonding efficiency conditions, the ability of composites to sustain and transmit load decreases drastically. Thermal stress concentration occurs at the vicinity of the fiber ends, although peak values depend on the bonding efficiency value.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Tribology and Wear Analysis · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Callister · 1994
2. Matrix solidification and the resulting residual thermal-stresses in composites10.1007/BF00555929 ↗
3. Kim JK, Mai YW. Engineered interfaces in fiber reinforced composites, 1st ed.; 1998.10.1016/B978-008042695-2/50002-6 ↗
4. Analysis of the deformation of a symmetrically-loaded fiber embedded in a matrix material10.1016/0961-9526(91)90022-K ↗
5. Strength formulae of unidirectional composites including thermal residual stresses10.1016/S0167-577X(99)00069-5 ↗
6. Thermal stresses in fibrous composites incorporating hybrid interphase regions10.1016/S0266-3538(02)00103-3 ↗
7. The elastic moduli of fiber reinforced materials10.1115/1.3629590 ↗
8. Simplified micromechanical equations for thermal residual stress analysis of coated fiber composites10.1520/CTR10096J ↗
9. Residual stresses in a composite with continuously varying Young's modulus in the fiber/matrix interphase10.1177/002199839202600601 ↗
10. The interphase in unidirectional fiber-reinforced epoxies: effect of residual thermal stresses10.1016/0266-3538(93)90041-E ↗
11. Carbon-fiber-reinforced YMAS glass ceramic matrix-IV thermal residual stresses and fiber/matrix interfaces10.1016/S0266-3538(97)00139-5 ↗
12. Thermal expansion coefficient of unidirectional fiber reinforced ceramics,10.1111/j.1151-2916.1988.tb07521.x ↗
13. The Eshelby tensor and the theory of continuous distributions of inhomogeneities10.1016/S0093-6413(02)00303-8 ↗
14. Analysis of residual stresses in a single fiber-matrix composite10.1016/S0143-7496(03)00097-6 ↗
15. Equivalence of Eshelby inclusion theory and Wechsler–Lieberman–Read, Bowles–Mackenzie martensite-crystallography theories
16. Agarwal · 2006
17. Hearn EJ. Mechanics of materials: an introduction to the mechanics of elastic and plastic deformation of solids and structural materials, 3rd ed.; 1997.10.1016/B978-075063266-9/50000-7 ↗
18. Axisymmetric stress distribution in the single filament pull-out test10.1016/0921-5093(94)90406-5 ↗
19. Evolution and influence of residual stresses/strains of fiber reinforced laminates,10.1016/j.compscitech.2003.11.012 ↗
20. A method of stress analysis for interfacial property evaluation in thermoplastic composites10.1016/S0921-5093(99)00578-X ↗
21. Maple 12, copyright 1981–2008 by Waterloo Maple Inc.
22. Abaqus software, version 6.7-1, copyright 1998–2008 by ABAQUS Inc.