Influence of an oxidation of the carbon fiber surface on the adhesion strength in carbon fiber-acrylate composites cured by electron beam
Source abstract
Abstract
Abstract Oxidized and non-oxidized carbon fibers were used to investigate the influence of an oxidation surface treatment on the adhesion strength with an acrylate resin cured by electron beam. For each type of fiber, a complete characterization of the surface properties was done (topography at a nanometric scale, specific surface area, X-ray photoelectron spectroscopy analysis and dispersive and polar components of the surface energy). The adhesion strength was measured by a pull-out test. For comparison, an isothermal UV curing of the matrix was also investigated. The value of the interfacial shear strength, determined by Greszczuk's model, was increased by the oxidation of the carbon fiber surface in the case of UV curing. In the case of electron beam curing, low values were obtained for both types of fibers, which could be explained by an incomplete cure of the matrix at the interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Surface Modification and Superhydrophobicity · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Chapiro · 1962
2. Brenner W, Oliver W. Commercial aspect of instantaneous radiation cure of reinforced plastics. In: Proceedings the of 22nd annual conference of the society of plastics industry, reinforced plastics division; 1967.
3. Parrot P. Electron beam curing at Aerospatiale. In: Proceedings of the 44th international SAMPE symposium conference; May 23–27, 1999. p. 1354–8.
4. Radiation-curable carbon fiber prepeg composites10.1002/pc.750090604 ↗
5. Radiation-curable prepeg composites10.1002/pc.750120204 ↗
6. Fabrication of epoxy matrix composites by electron beam induced cationic polymerization10.1021/cm9700312 ↗
7. Advanced curing technologies using photo- and electron beam induced cationic polymerization10.1016/S0969-806X(01)00476-5 ↗
8. UV and electron beam-induced cationic polymerization10.1016/S0168-583X(99)00109-3 ↗
9. Investigation on the electron-beam curing of vinylester resin10.1016/j.radphyschem.2007.11.006 ↗
10. Study on the EB irradiated vinylester resin by Positron Annihilation Lifetime Spectroscopy (PALS)10.1515/polyeng-2008-286-703 ↗
11. Radiation processing of carbon fiber-acrylated epoxy composites
12. Environmental issues for polymer matrix composites and structural adhesives10.1007/s100980000089 ↗
13. Evolution of cure, mechanical properties, and residual stress during electron beam curing of a polymer composite10.1016/j.compositesa.2008.12.010 ↗
14. Janke CJ, Dorsey GH, Havens SJ, Lopata VJ. Toughened epoxy resins cured by electron beam radiation. In: Proceedings of the 28th international SAMPE technical conference; November 4–7, 1996. p. 877–89.
15. Electron beam curing of composites in North America10.1016/S0969-806X(01)00553-9 ↗
16. Toughening of electron beam cured acrylate resins10.1002/1439-2054(20000801)280:1<20::AID-MAME20>3.0.CO;2-8 ↗
17. Defoort B, Chauray E, Vautard F, Ponsaud P, Nardin M, Schultz J, et al. Improvement of mechanical properties of acrylate based EB cured composite materials. In: Proceedings of the international SAMPE conference, Long Beach, California, USA; May 2005.
18. Krzeminski M, Defoort B, Coqueret X. Nanoscale toughening for advanced composite matrices cured by electron beam activation. In: Proceedings of the 2nd international carbon composites conference, Arcachon, France; October 27–29, 2009.
19. Kreminski M, Defoort B, Coqueret X. Nanoscale toughened matrices cured under electron beam activation for high performance composite applications. In: Proceedings of the international SAMPE conference, Seattle, USA; May 2010.
20. Interfacial adhesion, interphase formation and mechanical properties of single fiber polymer based composites
21. Some physico-chemicals aspects of the fibre–matrix interphase in composite materials10.1080/00218469408026629 ↗
22. Physico-chemical interactions between carbon fibers and PEEK
23. Surface roughness and bond strength of adhesives10.1080/00218467208072208 ↗
24. The role of chemical bonding and surface topography in adhesion between carbon fibers and epoxy matrices
25. Effect of surface oxygen content and roughness on interfacial adhesion in carbon fiber-polycarbonate composites10.1163/156856102320252813 ↗
26. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
27. Role of acid–base interfacial bonding in adhesion10.1163/156856187X00049 ↗
28. Acid–base contribution to polymer–filler interactions10.5254/1.3536012 ↗
29. The role of the interface in carbon-fiber epoxy composites10.1080/00218468708080469 ↗
30. Effects of microwave processing on fiber–matrix adhesion. 2. Enhanced chemical bonding epoxy to carbon-fibers10.1080/00218469008030188 ↗
31. Acid–base interaction and covalent bonding at a fiber–matrix interface: contribution to the work of adhesion and measured adhesion strength10.1163/156856100742681 ↗
32. Bikerman · 1961
33. Weak boundary layers in styrene–butadiene rubber10.1080/00218469508014366 ↗
34. Influence of thermal history on the results of fragmentation tests on high-modulus carbon-fiber/polycarbonate model composites10.1016/S0266-3538(96)00173-X ↗
35. Carbon fiber–vinyl ester interfacial adhesion improvement by the use of an epoxy coating
36. Eberle CC, Janke CJ, Sands JA, Wilenski MS. Interfacial properties of electron cured composites. Cooperative research and development agreement final report for cooperative research and development. Agreement number ORNL99-0544; January 2005.
37. Defoort B, Drzal LT. Adhesion between carbon fibers and cationic matrices in electron-beam processed composites. In: Proceedings of the SAMPE ACCE midwest advanced materials and process conference, Dearborn, Michigan; September 12–14, 2000.
38. Defoort B, Drzal LT. Interfacial phenomena and fiber matrix adhesion in electron beam processed composites. In: Proceedings of the 33rd international SAMPE technical conference, Seattle, Washington, USA; 2001.
39. Defoort B, Drzal LT. Adhesion between carbon fibers and cationic matrices in electron-beam curing processed composites. In: Proceedings of the 46th international SAMPE symposium, Long Beach, California, USA; May 6–10, 2001. p. 2063–75.
40. Janke CJ, Yarborough KD, Drzal LT. Fiber–matrix interface studies on electron beam cured composites. In: Proceedings of the 44th international SAMPE symposium conference; May 23–27, 1999.
41. Mäder E. Nanostructured surfaces and interphases for improved performances of radiation cured composites. In: Proceedings of the first euraycure workshop, radiation curing of composites, Baden Baden; October 8–9, 2003.
42. The effect of carbon-fiber surface properties on the electron-beam curing of epoxy-resin composites10.1016/S0266-3538(01)00222-6 ↗
43. Lopata VJ, Chung M, McDougall TE, Weinberg V. Electron-curable adhesives for high performance structures. In: Proceedings of the 39th SAMPE conference, Anaheim, California; 1994.
44. Defoort B, Drzal LT. Influence of processing conditions on the electron beam curing kinetic of an epoxy resin for composites. In: Proceedings of the 2000 international chemical congress of pacific basin society, Honolulu, Hawaii, USA; December 14–19, 2000.
45. Defoort B, Drzal LT. Influence of thermal postcuring on electron beam cured composites. In: Proceedings of the 46th international SAMPE symposium, Long Beach, California, USA; May 6–10, 2001. p. 2550–62.
46. Synthesis of (6-isocyanaton-hexyl)carbamoyloxyethyl-methacrylate and its uses as sizing-agent for carbon fiber composite materials cured by electron beam10.1007/BF00944816 ↗
47. Improvement of fiber/matrix bonding in carbon-fiber/acrylic composites by electron irradiation: concept of difunctional chemical coupling agent10.1016/0266-3538(94)90165-1 ↗
48. Influence of the carbon fiber surface properties on interfacial adhesion in carbon fiber-acrylate composites cured by electron beam10.1016/j.compositesa.2011.03.015 ↗
49. Surface oxidized carbon fibers: I. Surface structure and chemistry10.1016/0008-6223(96)00032-2 ↗
50. Nitric acid oxidation of vapor grown carbon nanofibers10.1016/j.carbon.2004.04.040 ↗
51. Effect of electrolytic oxidation upon the surface chemistry of type a carbon fibres. 3. Chemical state, source and location of surface nitrogen10.1016/0008-6223(96)00061-9 ↗
52. Determination of the surface energy of solids by the two-liquid-phase method
53. Fibre surface energy characterization10.1080/00218468108071202 ↗
54. Lide DR. Surface tension of common liquids. In: Handbook of chemistry and physics, 74th ed. CRC Press.
55. Electron beam curing of thick thermoset composite matrices10.1016/S0032-3861(98)00752-6 ↗
56. Greszczuk LB. Theoretical studies of the mechanics of the fiber–matrix interface in composites. In: Proceedings of the interfaces in composites ASTM STP 452; 1969. p. 42–58.10.1520/STP44699S ↗
57. Some theoretical considerations of fiber pull-out from elastic matrix10.1007/BF00549541 ↗
58. The glass–polymer interface: I—theoretical consideration for single pull-out tests10.1016/0266-3538(85)90089-2 ↗
59. Indirect estimation of fiber/polymer bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part I: local bond strength10.1163/156856102320256837 ↗
60. The local bond strength and its determination by the fragmentation and pull-tout tests10.1016/S0266-3538(97)00037-7 ↗
61. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites10.1016/0921-5093(90)90203-F ↗
62. Advances in pull-out testing and data analysis10.1016/0266-3538(91)90016-I ↗
63. Adhesion of graphite fibers to epoxy matrices: I. The role of fiber surface treatment10.1080/00218468308074901 ↗
64. Carbon fiber in polymer reinforcement10.1016/0008-6223(77)90047-1 ↗
65. Thermodynamics of contact angles. II. Rough solid surface10.1016/0021-9797(75)90010-7 ↗
66. Ponsaud P, Defoort B, Coqueret X. Reactivity and network structure of UV- and EB-cured Bis-Phenol A Ethoxy Diacrylate. In: Proceedings of the RadTech Europe 2005 conference and exhibition; 2005.
67. Electron beam initiated polymerization of acrylate compositions. 1: FTIR monitoring of incremental irradiation10.1016/S0969-806X(00)00262-0 ↗
68. Recent advances in electron-beam curing of carbon fiber-reinforced composites10.1016/j.radphyschem.2009.03.042 ↗
69. Calorimetric characterization of the heterogeneities produced by the radiation-induced cross-linking polymerization of aromatic diacrylates10.1021/ma902817g ↗
70. Properties and morphologies of UV-cured epoxy acrylate blend films containing hyperbranched polyurethane acrylate/hyperbranched polyester10.1002/polb.20484 ↗
71. Photoinitiated polymerization of vinyl ether and acrylate monomer mixtures10.1080/10601329708014988 ↗
72. X-ray photoelectron spectroscopic study of carbon fiber surfaces. 23. Interfacial interactions between polyvinyl alcohol and carbon fibers electrochemically oxidized in nitric acid solution10.1021/cm9902772 ↗
73. X-ray photoelectron spectroscopic studies of carbon fiber surfaces. 24. Interfacial interactions between polyimide resin and electrochemically oxidized PAN-based carbon fibers10.1021/cm000930h ↗
74. X-ray photoelectron spectroscopic studies of carbon fiber surfaces. 25. Interfacial interactions between PEKK polymer and electrochemically oxidized in nitric acid solution and degradation in a saline solution10.1021/cm000555t ↗
75. Characterization by atomic force microscopy of the nanoheterogeneities by the radiation-induced cross-linking polymerization of aromatic diacrylates10.1021/ma101615k ↗
76. Crosslinking of vinyl ester matrix in contact with different surfaces10.1016/0010-4361(94)90197-X ↗
77. Interfacial shear strength in glass-fiber/vinylester composites10.1016/0266-3538(96)00040-1 ↗
78. Ponsaud P. Amélioration des propriétés mécaniques transverses de matériaux composites polymérisés sous rayonnement ionisant: étude des facteurs influents, PhD thesis. Université des Sciences et Technologies de Lille; 2005.
79. Fiber pull out experiments with thermoplastics10.1002/pen.760311703 ↗