Development of a cohesive zone model for fatigue/fracture characterization of composite bonded joints under mode II loading
Source abstract
Abstract
Abstract In this work a suitable cohesive zone model for high-cycle fatigue of bonded joints under mode II loading is developed. Stiffness degradation as a function of time is simulated by means of a damage parameter that accounts for static and fatigue damage. Finite element analyses of the end notched flexure test considering different coefficients of the modified Paris law and different load ratios were performed. A data reduction scheme based on the crack equivalent concept and Timoshenko Beam theory was adapted to fatigue analysis thus avoiding monitoring crack length during experiments, which is particularly cumbersome to execute in fatigue tests under mode II loading. The resulting numerical crack growth rates as a function of mode II strain energy release rate were compared with the input modified Paris laws. The verified good agreement shows the suitability of the model concerning fatigue/fracture characterization of adhesively bonded joints under high-cycle fatigue submitted to mode II loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Fatigue in adhesively bonded joints: a review
2. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
3. The mathematical theory of equilibrium cracks in brittle fracture10.1016/S0065-2156(08)70121-2 ↗
4. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
5. A nonlinear finite-element approach for the analysis of mode-I free edge delamination in composites10.1016/0020-7683(93)90014-X ↗
6. Modeling the initiation and growth of delaminations in composite structures
7. Progressive delamination using interface elements10.1177/002199839803201401 ↗
8. Prediction of compressive strength of carbon–epoxy laminates containing delamination by using a mixed-mode damage model10.1016/S0263-8223(00)00091-X ↗
9. Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation10.1016/S0022-5096(98)00101-X ↗
10. Cohesive law and notch sensitivity of adhesive joints10.1016/S1359-6454(01)00404-9 ↗
11. Application of interface finite elements to three-dimensional progressive failure analysis of adhesive joints10.1046/j.1460-2695.2003.00653.x ↗
12. A straightforward method to obtain the cohesive laws of bonded joints under mode I loading10.1016/j.ijadhadh.2012.07.008 ↗
13. Numerical simulation of fatigue-driven delamination using interface elements10.1002/nme.1338 ↗
14. On the numerical simulation of fatigue driven delamination using interface elements10.1016/j.ijfatigue.2006.02.003 ↗
15. Simulation of delamination in composites under high-cycle fatigue10.1016/j.compositesa.2006.11.009 ↗
16. A progressive damage model for the prediction of fatigue crack growth in bonded joints10.1080/00218464.2010.484305 ↗
17. A fatigue degradation law for cohesive interface elements—development and application to composite materials10.1016/j.ijfatigue.2010.04.006 ↗
18. Interface element including point-to-surface constraints for three-dimensional problems with damage propagation10.1108/02644400010308053 ↗
19. Cohesive zone model for high-cycle fatigue of adhesively bonded joints under mode I loading10.1016/j.ijsolstr.2013.12.009 ↗
20. A crack tip tracking algorithm for cohesive interface element analysis of fatigue delamination propagation in composite materials10.1016/j.ijsolstr.2012.03.034 ↗
21. Pure mode II fracture characterization of composite bonded joints10.1016/j.ijsolstr.2008.12.001 ↗
22. Characterization of composite bonded joints under pure mode II fatigue loading10.1016/j.compstruct.2012.07.031 ↗
23. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models10.1016/j.engfracmech.2006.08.025 ↗