Interfacial failure in adhesive joints: Experiments and predictions
Source abstract
Abstract
Abstract The aim of this paper is the development of a method to predict interfacial failure in adhesive joints. The main originality of the paper resides on the application of a twofold criterion involving stress and energy conditions simultaneously to predict adhesive failure onset in different geometries of adhesive joints subjected to diverse loadings. Butt joints and double lap joints made of linear elastic materials are tested in torsion and tension. The failure onset predictions are based on finite element calculations and a twofold criterion which considers a novel stress condition. These predictions are accurate and prove the validity of the method to predict adhesive failure for different adhesive joint configurations and loadings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Experimental and numerical analysis of single-lap joints for the automotive industry10.1016/j.ijadhadh.2008.09.001 ↗
2. Evaluating the strengths of thick aluminum-to-aluminum joints with different adhesive lengths and thicknesses10.1016/j.compstruct.2009.08.037 ↗
3. Failure analysis of bonded T-peel joints: efficient modeling by standard finite elements with experimental validation10.1016/j.ijadhadh.2009.10.004 ↗
4. Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint10.1016/j.conbuildmat.2010.05.021 ↗
5. Adhesively bonded lap joints from pultruded GFRP profiles. Part I: stress–strain analysis and failure modes10.1016/j.compositesb.2004.11.001 ↗
6. Modeling the environmental degradation of adhesively bonded aluminum and composite joints using a CZM approach10.1016/j.ijadhadh.2006.09.015 ↗
7. Influence of adhesive thickness on the behaviour of bonded assemblies under shear loadings using a modified TAST fixture10.1016/j.ijadhadh.2009.11.003 ↗
8. Non-linear failure criteria for a double lap bonded joint10.1016/j.ijadhadh.2009.06.007 ↗
9. McCarthy J. Industry briefing: failure criteria for adhesive joints. AEA Technology (Harwell) Report; 1999.
10. A unified approach for predicting the strength of cracked and non-cracked adhesive joints10.1080/00218469508014357 ↗
11. An experimental investigation of failure initiation in bonded joints10.1016/S1359-6454(98)00200-6 ↗
12. Failure prediction and strength improvement of uni-directional composite single lap bonded joints10.1016/j.compstruct.2007.02.005 ↗
13. Quadratic stress criterion for initiation of delamination10.1177/002199838802201205 ↗
14. Enhanced layerwise model for laminates with imperfect interfaces. Part 2: Experimental validation and failure prediction10.1016/j.compstruct.2011.11.023 ↗
15. Modelling the static response of unaged adhesively bonded structures10.1016/j.engfracmech.2012.10.014 ↗
16. Predicting fatigue damage in adhesively bonded joints using a cohesive zone model10.1016/j.ijfatigue.2009.12.013 ↗
17. Characterisation of moisture-dependent cohesive zone properties for adhesively bonded joints10.1016/j.engfracmech.2010.08.023 ↗
18. Modeling the environmental degradation of adhesively bonded aluminum and composite joints using a CZM approach10.1016/j.ijadhadh.2006.09.015 ↗
19. The static and fatigue response of metal laminate and hybrid fibre-metal laminate doublers joints under tension loading10.1016/j.compstruct.2012.03.013 ↗
20. Benchmark tests on adhesive strengths in butt, single and double lap joints and double-cantilever beams10.1016/0143-7496(95)00051-8 ↗
21. Study on ASTM shear-loaded adhesive lap joints10.1016/S1000-9361(11)60218-5 ↗
22. Strength or toughness? A criterion for crack onset at a notch10.1016/S0997-7538(01)01184-6 ↗
23. A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates10.1016/j.ijsolstr.2010.01.018 ↗
24. Plastic yielding of a film adhesive under multiaxial stresses10.1016/S0143-7496(99)00033-0 ↗
25. Stress analysis of axisymmetric butt joints loaded in torsion and tension10.1243/03093247V131001 ↗
26. Development of an improved adhesive test method for composite assembly design10.1016/j.compscitech.2004.09.008 ↗