A new experimental approach for the estimation of bending moments in adhesively bonded single lap joints
Source abstract
Abstract
Abstract The state of stresses in the adhesive layer may be described by a parameter known as edge moment factor. This parameter is also defined as normalized bending moment, or bending moment factor. The main goal of the present work is to determine the bending moment factor using the Digital Image Correlation method. For this purpose, 9 aluminum-epoxy single-lap-joint specimens with different adhesive thicknesses and ratios of segment of outer adherend length to the half of the overlap length were investigated. All specimens were tested under tensile loading. Deflections of single lap-joint specimens were estimated by the Digital Image Correlation method. In addition, Hart-Smith, Goland and Reissner and modified Goland and Reissner models were investigated in order to compare theoretical prediction with experimental data. The improvement to the Goland and Reissner model proposed by Tsai–Morton was more suitable to describe the mechanical behavior of investigated single-lap joints. Results show that the alternative methodology proposed here is a good way for estimating bending moment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Die Nietkraftverleitung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten
2. The stresses in cemented joints10.1115/1.4009336 ↗
3. Hart-Smith · 1974
4. Effects of adherend deflection on single lap joints10.1016/0020-7683(94)90037-X ↗
5. An evaluation of analytical and numerical solutions to the single lap joints10.1016/0020-7683(94)90036-1 ↗
6. Fully-coupled nonlinear analysis of single lap adhesive joints10.1016/j.ijsolstr.2006.07.009 ↗
7. Analytical models of adhesively bonded joints—Part I: literature survey10.1016/j.ijadhadh.2008.06.005 ↗
8. Analytical models of adhesively bonded joints—part II: comparative study10.1016/j.ijadhadh.2008.06.007 ↗
9. Stress analysis of adhesively bonded lap joints10.1243/03093247V093185 ↗
10. Harris, J.A. and Adams. R.D. Strength prediction of bonded single lap joints by non-linear finite element methods.
11. Nonlinear analysis of adhesively bonded joints10.1016/0020-7462(88)90017-0 ↗
12. Influence of the spew fillet and other parameters on the stress distribution in the single-lap joint10.1080/00218468108073182 ↗
13. An experimental investigation of nonlinear deformations in single-lap joints10.1016/0167-6636(94)00056-5 ↗
14. Finite element and experimental studies on single-lap balanced joints in tension10.1016/S0143-7496(00)00052-X ↗
15. An investigation on strain/stress distribution around the overlap end of laminated composite single-lap joints10.1016/j.compstruct.2008.11.002 ↗
16. Analysis of the nonlinear behavior of adhesives in bonded assemblies—comparison of TAST and Arcan tests10.1016/j.ijadhadh.2008.04.006 ↗
17. A new method for the determination of bending moments in single lap joints10.1016/j.ijadhadh.2009.09.001 ↗
18. Sutton · 2009
19. Sharpe · 2008
20. Experimental analysis of the influence of hydrostatic stress on the behaviour of an adhesive using a pressure vessel10.1080/00218464.2011.597318 ↗
21. Simple shear under large deformation: experimental and theoretical analyses10.1016/j.euromechsol.2013.07.002 ↗
22. Shear modulus estimation of the polymer polydimethylsiloxane (PDMS) using digital image correlation10.1016/j.matdes.2009.07.012 ↗
23. Mechanical characterization of hyperelastic polydimethylsiloxane by simple shear test10.1016/j.msea.2010.11.025 ↗
24. Comparison of simple and pure shear for an incompressible isotropic hyperelastic material under large deformation10.1016/j.polymertesting.2012.11.005 ↗
25. Through-thickness strain field measurement in a composite/aluminum adhesive joint10.1016/j.compositesa.2008.04.018 ↗
26. Characterising the behaviour of composite single lap bonded joints using digital image correlation10.1016/j.ijadhadh.2012.08.010 ↗
27. Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: preliminary studies10.1016/j.ijadhadh.2013.01.004 ↗
28. Experimental analysis of bonded single lap joint with flexible adhesive10.1186/2196-4351-2-1 ↗
29. Effect of boundary conditions and spacers on single-lap joints loaded in tension or compression10.1016/j.ijadhadh.2005.09.005 ↗
30. Three-dimensional deformation in a single-lap joint10.1243/03093247V292137 ↗