Strength prediction of weld-bonded joints
Source abstract
Abstract
The present work aimed at predicting the strength of weld-bonded joints. For comparison purposes, adhesive-bonded and resistance spot-welded joints were also included in this study. The present work demonstrated that, the major principal stress predicted in spot-welded joints is nearly five to six times, when compared with those associated with weld-bonded and adhesive-bonded joints, respectively The present work also demonstrated the effective role played by the adhesive layer in strengthening weld-bonded joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Mechanical Behavior of Composites · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Darwish S, Ghanya A. Critical assessment of weld-bonded technologies. J Mater Process Technol 2000; 221–229.10.1016/S0924-0136(00)00592-6 ↗
2. Heidi B, El-Sebakhy I, Malik D. Weldbonding of structural adhesives for body stiffening. Worldwide Passenger Car Conf., USA, 1992.
3. Fatigue strength of adhesive bonded box section beams with a longitudinal partition under torsion
4. Wang PC, Chishholm, Banas G, Lawrence VL. The role of failure mode, resistance spot weld and adhesive on the fatigue behavior of weld-bonded aluminum. Weld J 1995; 41–47.
5. Darwish SM, Azaym K, Sadek MM. Dynamic characteristics of industrial double containment joints. Proceedings of the International Conference on CAPE, Edinburgh, 1989.
6. Design philosophy of a bonded gear box10.1016/0890-6955(91)90042-2 ↗
7. Improving electrical conductivity of structural epoxy resin adhesives
8. Thermal conductivity of epoxy resin adhesives10.1016/0143-7496(89)90064-X ↗
9. Phase stability of duralumin machined with bonded and brazed metal cutting tools10.1016/0890-6955(92)90048-L ↗
10. Schwartz MM. Metals joining manual book. New York: McGraw-Hill, 1979. p. 1–32.
11. Adhesive bonding of metal cutting tools10.1016/0890-6955(89)90061-8 ↗
12. Investigation of heat flow through bonded and brazed metal cutting tools10.1016/0890-6955(89)90034-5 ↗
13. Analysis of bonded double containment cantilever joints
14. Alsamhan A, Pillinger I, Hartely P. The development of real time re-meshing technique for simulating cold-roll-forming using FE methods, submitted for publication.
15. Alsamhan A, Hartely P, Pillinger I. The computer simulation of cold-roll-forming using FE methods and applied real time re-meshing techniques, submitted for publication.
16. Alsamhan A, Hartely P, Pillinger I. Predicting the deformation between forming stands of cold-roll-forming process using FE methods, submitted for publication.
17. Design rational of bonded, double containment joints with dissimilar materials10.1016/0143-7496(91)90028-G ↗
18. GID software copy writes of International Center For Numerical Methods In Engineering (CIMNE)- Edificio C-1, Campus Norte UPC, 08034 Barcelona-Spain.