journal article·2025-06Open access

Fatigue crack growth analysis of a ductile structural acrylic adhesive under constant-amplitude load control at various loading conditions

Yu Sekiguchi, Kazumasa Shimamoto, Keiji Houjou, Chiaki Sato

Abstract

The fatigue behavior of adhesives depends on the type of adhesive and loading conditions. Highly ductile adhesives, such as structural acrylic adhesives, are excellent under static conditions; however, their fatigue crack growth (FCG) is not yet well understood. Especially when ductile adhesives are used to bond large structures, the joints are subjected to cyclic creep, a combination of fatigue and creep. Therefore, it is important to understand the contribution of creep to FCG clearly. The fatigue double cantilever beam tests of a structural acrylic adhesive were conducted by varying mean loads to investigate the effect of creep on FCG. Calculating the equivalent crack length from compliance, the FCG was found to be divided into three stages, similar to the creep curve. The relationships between FCG rate and energy release rate (ERR) and between ERR and the number of cycles until the FCG onset, i.e., the FCG relationship and G−N curve, were investigated using several ERR parameters. A parameter , which is a combination of ERRs represented by and , was found to be the most suitable crack driving force, and was therefore used to discuss fatigue and creep contributions. For the adhesive tested, the creep contribution was slightly greater in the load control than in the displacement control. Furthermore, the effect of R ratio on the FCG relationships of and was discussed in relation to the fatigue and creep contributions. • Fatigue crack propagation of a ductile adhesive was divided into multiple stages. • Fatigue and creep contributions were clarified using load range and mean load. • Effect of R ratio on fatigue crack growth relationship was influenced by creep.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Chapter 15. Structural acrylic adhesives: a critical review
2. Mixed-mode fracture analysis of composite bonded joints considering adhesives of different ductility10.1007/s10704-017-0219-x ↗
3. Mode I fracture energy of adhesive joints bonded with adhesives with different characteristics under quasi-static and impact loading
4. Fatigue crack growth analysis of different adhesive systems: effects of mode mixity and load level10.1111/ffe.13145 ↗
5. The influence of mode mixity and adhesive system on the fatigue life of adhesive joints10.1111/ffe.13301 ↗
6. Analysis of creep crack growth in bonded joints based on a Paris' law-like approach10.1016/j.ijadhadh.2024.103787 ↗
7. Fatigue crack growth in bonded DCB specimens10.1016/S0013-7944(03)00046-8 ↗
8. An investigation of fatigue failure prediction of adhesively bonded metal/metal joints10.1016/j.ijadhadh.2009.06.003 ↗
9. Fatigue crack growth properties of a two-part acrylic-based adhesive in an adhesive bonded joint: double cantilever-beam tests under mode I loading10.1016/j.ijfatigue.2017.02.008 ↗
10. Fatigue crack propagation rate of CFRP/aluminum adhesively bonded DCB joints with acrylic and epoxy adhesives10.1016/j.ijadhadh.2018.06.003 ↗
11. Effect of bond-line thickness on fatigue crack growth of structural acrylic adhesive joints10.3390/ma14071723 ↗
12. Single and periodic overloading effects on the mode I fatigue crack growth of a ductile adhesive10.1016/j.tafmec.2022.103528 ↗
13. Investigation of geometric and material effects on the fatigue performance of composite and steel adhesive joints10.1016/j.compstruct.2024.118313 ↗
14. Fibre-reinforced plastic composites–Determination of mode I interlaminar fracture toughness
15. 2007
16. 2009
17. Development of a standardized procedure for the characterization of interlaminar delamination propagation in advanced composites under fatigue mode I loading conditions10.1016/j.engfracmech.2009.07.014 ↗
18. Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: development of a standardized test procedure10.1016/j.compscitech.2011.11.033 ↗
19. Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: results from ESIS TC4 round-robins10.1016/j.engfracmech.2013.12.002 ↗
20. Cyclic fatigue delamination of carbon fiber-reinforced polymer-matrix composites: data analysis and design considerations10.1016/j.ijfatigue.2015.10.025 ↗
21. Mode II fracture toughness of a brittle and a ductile adhesive as a function of the adhesive thickness10.1080/00218464.2010.506155 ↗
22. Mixed mode fracture toughness of adhesively bonded joints with residual stress10.1016/j.ijsolstr.2016.10.011 ↗
23. An apparatus for mixed-mode fracture characterization of adhesive joints10.1016/j.tafmec.2017.04.014 ↗
24. An experimental study of the interfacial fracture behavior of Titanium/CFRP adhesive joints under mode I and mode II fatigue10.1016/j.ijfatigue.2020.105586 ↗
25. 2019
26. Fatigue threshold behavior of adhesive joints10.1016/j.ijadhadh.2009.12.004 ↗
27. Fatigue threshold analysis of adhesives: displacement control vs. load control strategy10.24840/2975-8262_001-001_001843 ↗
28. Load-control vs. displacement-control strategy in fatigue threshold analysis of adhesives: effects of temperature10.1016/j.engfracmech.2023.109255 ↗
29. AFM observation of sea-island structure formed by second generation acrylic adhesive10.1080/00218464.2019.1649148 ↗
30. Analytical determination of adhesive layer deformation for adhesively bonded double cantilever beam test considering elastic-plastic deformation10.1080/00218464.2018.1489799 ↗
31. Fracture propagation analysis on two component type acrylic adhesive joints10.1016/j.ijadhadh.2018.02.019 ↗
32. Experimental investigation of the effects of adhesive thickness on the fracture behavior of structural acrylic adhesive joints under various loading rates10.1016/j.ijadhadh.2020.102782 ↗
33. Two-parameter analysis of fatigue crack growth behavior in structural acrylic adhesive joints10.1111/ffe.13908 ↗
34. Mode I delamination propagation and R-ratio effects in woven composite DCB specimens for a multi-directional layup10.1016/j.ijfatigue.2016.12.005 ↗
35. From S-N to the Paris law with a new mixed-mode cohesive fatigue model for delamination in composites10.1016/j.tafmec.2020.102499 ↗
36. Effects of mean load on interlaminar fracture behavior of carbon-epoxy prepreg fabric laminates under mode I fatigue loading10.1016/j.compstruct.2021.114451 ↗
37. Paris law relations for an epoxy-based adhesive
38. Fatigue crack growth in laser-treated adhesively bonded composite joints: an experimental examination10.1016/j.ijadhadh.2020.102784 ↗
39. Data reduction methods in the fatigue analysis of the double cantilever beam, Part I: fundaments and virtual fatigue testing
40. Data reduction methods in the fatigue analysis of the double cantilever beam, Part II: evaluation and case studies
41. 2015
42. Misinterpreting the results: how similitude can improve our understanding of fatigue delamination growth10.1016/j.compscitech.2010.11.010 ↗
43. Loading variable effects on mode-I fatigue of wood-FRP composite bonded interface10.1016/S0266-3538(03)00231-8 ↗
44. Crack growth in adhesives: similitude and the Hartman−Schijve equation10.1016/j.compstruct.2021.114260 ↗
45. Cyclic-fatigue crack growth in polymer composites: data interpretation via the Hartman-Schijve methodology10.1016/j.engfracmech.2024.110743 ↗
46. Delamination growth behavior of a fabric reinforced laminated composite under mode I fatigue10.1115/1.2812390 ↗
47. Murri · 2013 · TM
48. Cyclic creep response of adhesively bonded steel lap joints10.1080/00218464.2016.1146880 ↗
49. Fatigue threshold and crack growth rate of adhesively bonded joints as a function of load/displacement ratio10.1016/j.compositesa.2013.11.001 ↗
50. Stress ratio effect on cyclic debonding in adhesively bonded composite joints10.1016/0263-8223(87)90014-6 ↗
51. On the physical interpretation of the R-ratio effect and the LEFM parameters used for fatigue crack growth in adhesive bonds10.1016/j.ijfatigue.2016.12.033 ↗
52. Effect of stress ratio on near-threshold propagation of delimination fatigue cracks un unidirectional CFRP10.1016/0266-3538(87)90076-5 ↗
53. Fatigue crack growth acceleration due to intermittent overstressing in adhesively bonded CFRP joints10.1016/j.compositesa.2004.03.002 ↗