journal article·2024-08

Rebonding of orthodontic metallic brackets: Comparative analysis of shear bond strength using different sandblasting particles

Laura Ajamil Rinaldi, Rayane Gomes da Silva, Cláudio Bráz Haro, Tarcila Triviño, Paulo Francisco Cesar, Lucas Hian da Silva

Publisher page

Abstract

Introduction This study aimed to evaluate the effect of two different sandblasting particles on the shear bond strength of rebonded metallic brackets to dental enamel. Methods Forty-eight metallic orthodontic brackets were divided into 4 experimental groups (n = 12) according to the surface treatment they received at their bases: positive control group (Metal), negative control group (MetalU), sandblasted with Rocatec Soft (MetalRoc) and sandblasted with Glass beads (MetalGlas). An elementary and topographic analysis of the base of the brackets was performed using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) after the surface treatment. The brackets rebonded to dental enamel were tested for their shear bond strength. The obtained data were subjected to statistical analysis one-way ANOVA and Tukey`s test (α = 0.05). The fracture surfaces of the specimens after the mechanical test were analyzed using optical microscopy to classify the failure mode. Results SEM photomicrographs for the MetalRoc and MetalGlas groups showed efficient removal of the remaining resin composite. In both sandblasting treatments, the presence of silicon (Si) and oxygen (O) at the base of the brackets were verified by means of the EDS, suggesting the occurrence of silica coating. MetalGlas group showed greater bond strength (9.38 ± 2.78 MPa) compared to the MetalU group (5.31 ± 1.2Mpa). Metal (8.82 ± 4.14 MPa) and MetalRoc (8.29 ± 3.95 MPa) groups showed similar bond strengths. The failure mode predominantly found in the sandblasted groups was the totally adhesive failure between resin composite and tooth. Significance The sandblasting treatment using the glass beads was efficient in removing the remaining resin composite of recycled brackets and generated fewer surface defects and topographic changes in the bracket bases.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dental materials and restorations · Orthodontics and Dentofacial Orthopedics · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A visible light-activated direct-bonding material: an in vivo comparative study10.1016/0889-5406(89)90169-8 ↗
2. Comparison of the accuracy of bracket placement between direct and indirect bonding techniques10.1016/S0889-5406(99)70248-9 ↗
3. Bracket positioning and resets: five steps to align crowns and roots consistently10.1067/mod.2001.111220 ↗
4. Shear bond strength of new and recycled brackets to enamel10.1590/S0103-64402006000100010 ↗
5. Self-ligating brackets: present and future10.1016/j.ajodo.2006.06.018 ↗
6. Effectiveness and efficiency in clinical orthodontic practice
7. Treatment efficiency of conventional vs self-ligating brackets: effects of archwire size and material10.1016/j.ajodo.2005.07.018 ↗
8. Orthodontic bracket manufacturing tolerances and dimensional differences between select self-ligating brackets
9. Clinical characteristics and properties of ceramic brackets: a comprehensive review10.1016/S0889-5406(97)70271-3 ↗
10. Bond strength and debonding characteristics of a new ceramic bracket10.1016/j.ajodo.2004.03.041 ↗
11. Effects of recycling and bonding agent application on bond strength of stainless steel orthodontic brackets
12. SBS vs inhouse recycling methods-an invitro evaluation
13. Comparative bond strength of new and reconditioned brackets and assessment of residual adhesive by light and electron microscopy10.1093/ejo/cjq081 ↗
14. A retrospective survey of the causes of bracket-and tube-bonding failures10.2319/021616-136.1 ↗
15. The effect of repeated bonding on the shear bond strength of different orthodontic adhesives10.1067/mod.2002.123042 ↗
16. Success and failure of banding and bonding: a clinical study
17. A clinical trial comparing the failure rates of directly bonded brackets using etch times of 15 or 60 seconds10.1016/0889-5406(88)90005-4 ↗
18. Influence of two different bracket base cleaning procedures on shear bond strength reliability10.5005/jp-journals-10024-1308 ↗
19. The impact of recycling and repeated recycling on shear bond strength of stainless steel orthodontic brackets10.1016/j.odw.2012.10.001 ↗
20. Effects of sandblasting and silica coating on the bond strength of rebonded mechanically retentive ceramic brackets10.1016/j.ajodo.2008.01.011 ↗
21. The influence of orthodontic bracket base design on shear bond strength10.1016/S0889-5406(03)00311-1 ↗
22. The effects of in-office reconditioning on the morphology of slots and bases of stainless steel brackets and on the shear/peel bond strength
23. Pros and cons of the reuse of direct-bonded appliances10.1016/0889-5406(89)90232-1 ↗
24. A review of direct orthodontic bonding10.1080/0301228X.1975.11743666 ↗
25. Retentive shear strengths of various bonding attachment bases10.1016/0002-9416(80)90158-X ↗
26. Orthodontic brackets removal under shear and tensile bond strength resistance tests – a comparative test between light sources10.1002/lapl.200710103 ↗
27. Effect of bracket base conditioning10.1016/j.ajodo.2007.03.034 ↗
28. Effects of silica coating and silane surface conditioning on the bond strength of metal and ceramic brackets to enamel
29. An overview of Direct Laser Deposition for additive manufacturing; Part II: mechanical behavior, process parameter optimization and control
30. Influence of contamination and cleaning on bond strength to modified zirconia10.1016/j.dental.2009.07.007 ↗
31. Radiodensity and hardness of enamel and dentin of human and bovine teeth, varying bovine teeth age10.1016/j.archoralbio.2008.06.012 ↗
32. Enamel surface evaluation after bracket debonding and different resin removal methods10.1590/2176-9451.20.2.061-067.oar ↗
33. Intraoral aging of orthodontic materials: the picture we miss and its clinical relevance10.1016/j.ajodo.2004.09.015 ↗