Impact loading analysis of double-lap composite bonded joints
Source abstract
Abstract
Currently, static modelling of adhesive joints is mostly understood, oppositely to dynamic problems, including impact. However, the literature is still scarce on the impact analysis of bonded joints, with preponderance to cohesive zone models (CZM). This work aims to predict the behaviour and strength of composite adhesively-bonded double-lap joints (DLJ) under impact loads, under different overlap lengths (LO). For this purpose, numerical simulations by the finite element method (FEM) and CZM are considered. The adhesives used for this numerical study are the Araldite® AV138 and the Sikaforce® 7752. Initially, a study was carried out with single-lap joint (SLJ) experimental data, acquired from a previous work, to validate the proposed technique to analyse impact-adhesive joints. DLJ analysis was based on elastic peel (σy) and shear (τxy) stresses, load-displacement (P-δ) curve analysis, and strength prediction. A CZM parameter-influence analysis on the DLJ strength predictions was also carried out. Validation of the proposed numerical technique was successfully accomplished to model bonded joints under impact loads. On the other hand, clear design guidelines were provided for these joints under impact.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Petrie · 2000
2. Da Silva · 2011
3. Study of the behaviour of adhesive joints of steel with CFRP for its application in bus structures10.1016/j.compositesb.2017.07.018 ↗
4. Adams · 2005
5. Adams · 1997
6. An investigation on strain/stress distribution around the overlap end of laminated composite single-lap joints10.1016/j.compstruct.2008.11.002 ↗
7. The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints10.1016/j.compstruct.2020.112136 ↗
8. Efficiency of double-lapped composite joints in bending10.1016/0010-4361(78)90589-X ↗
9. Comparison and evaluation of two types of cohesive zone models for the finite element analysis of fracture propagation in industrial bonded structures10.1016/j.engfracmech.2014.10.018 ↗
10. Finite element analysis of the influence of cohesive law parameters on the multiple delamination behaviors of composites under compression10.1016/j.compstruct.2015.06.058 ↗
11. Influence of adhesive thickness on local interface fracture and overall strength of metallic adhesive bonding structures10.1016/j.ijadhadh.2012.07.012 ↗
12. Bending behavior of single hat-shaped composite T-joints under out-of-plane loading for lightweight automobile structures10.1177/0731684418764608 ↗
13. Experimental characterization of cohesive zone models for thin adhesive layers loaded in mode I, mode II, and mixed-mode I/II by the use of a direct method10.1016/j.ijsolstr.2018.09.005 ↗
14. A unified theory of adhesive-bonded tubular joints with dissimilar adherends subjected to a multiplicity of axisymmetric loads10.1016/j.ijadhadh.2021.102991 ↗
15. Evaluation of grit-blasting as a pre-treatment for carbon-fibre thermoplastic composite to aluminium bonded joints tested at static and dynamic loading rates10.1016/j.compositesb.2020.107765 ↗
16. Geometrical optimization of adhesive joints under tensile impact loads using cohesive zone modelling10.1016/j.ijadhadh.2019.102492 ↗
17. On the dynamic response of adhesively bonded structures10.1016/j.ijimpeng.2019.103479 ↗
18. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
19. Impact rupture of structural adhesive joints under different stress combinations10.1016/j.ijimpeng.2007.02.006 ↗
20. 3-D FEM stress analysis and strength evaluation of single-lap adhesive joints subjected to impact tensile loads10.1016/j.ijadhadh.2011.06.008 ↗
21. Finite element analysis of adhesively bonded composite joints subjected to impact loadings10.1016/j.ijadhadh.2014.07.012 ↗
22. Adhesive joint analysis under tensile impact loads by cohesive zone modelling10.1016/j.compstruct.2019.110894 ↗
23. Geometry and adhesive optimization of single-lap adhesive joints under impact10.1080/00218464.2021.1994404 ↗
24. Damage analysis of composite–aluminium adhesively-bonded single-lap joints10.1016/j.compstruct.2015.09.054 ↗
25. Mode I fracture toughness of CFRP as a function of temperature and strain rate10.1177/0021998316682309 ↗
26. Mode II fracture toughness of CFRP as a function of temperature and strain rate10.1016/j.compositesb.2017.02.013 ↗
27. Strain rate effect on mode I debonding characterization of adhesively bonded aluminum joints10.3390/pr11010081 ↗
28. The fracture behaviour of structural adhesives under high rates of testing10.1016/j.engfracmech.2009.07.013 ↗
29. Experimental study of strain rate effects on the strength of adhesively bonded joints after hygrothermal exposure10.1016/j.ijadhadh.2014.07.008 ↗
30. Numerical modelling of lap joints bonded with a rate-dependent adhesive10.1016/j.ijadhadh.2003.11.006 ↗
31. A modified mode I cohesive zone model for the delamination growth in DCB laminates with the effect of fiber bridging10.1016/j.ijmecsci.2020.105514 ↗
32. Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load10.1007/s40430-018-1056-1 ↗
33. Coupled cohesive zone models for mixed-mode fracture: a comparative study10.1016/j.engfracmech.2015.09.029 ↗
34. Evaluation of different modelling conditions in the cohesive zone analysis of single-lap bonded joints10.1080/00218464.2017.1307107 ↗
35. Validation of pure tensile and shear cohesive laws obtained by the direct method with single-lap joints10.1016/j.ijadhadh.2017.04.002 ↗
36. Design of adhesive joints based on peak elastic stresses10.1016/j.ijadhadh.2008.04.001 ↗
37. Double-lap adhesive bonded-joints assemblies modeling10.1016/j.ijadhadh.2010.02.006 ↗
38. An investigation into the stresses in double-lap adhesive joints with laminated composite adherends10.1016/j.ijsolstr.2010.08.011 ↗
39. Cohesive zone parametric analysis in the tensile impact strength of tubular adhesive joints10.1007/978-3-030-95463-5 ↗