Lignin-based silicone-modified epoxy resin with enhanced strength and toughness
Source abstract
Abstract
Epoxy composites with enhanced strength and toughness are vital in the field of electronic packaging material. This study proposes the synthesis of a novel lignin-based silicone-modified epoxy resin (LSE) to improve the strength and toughness of epoxy resins (EPs) simultaneously. The results demonstrate that the glass transition temperature, β -relaxation temperature, and crosslinking density of the composites decreased with increasing LSE content. Compared to neat EP, the toughness properties, including the impact strength and critical stress intensity factor ( K 1C ), of the 3 wt% LSE/EP composite improved by 16.25 % and 25.28 %, respectively. Meanwhile, the mechanical properties such as the tensile strength, bending modulus, and bending strength enhanced by 25.81 %, 16.21 %, and 42.43 %, respectively. Therefore, the LSE simultaneously exhibits toughening and strengthening effects. Based on the fracture surface evaluation results obtained using a scanning electron microscope and a nano-FTIR, these effects are attributed to the formation of interpenetrated networks and improved interfacial effects by the LSE. As an efficient fortifier and flexibilizer, LSE shows great promise for the preparation of EP packaging materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Synthesis and properties of polymers · Flame retardant materials and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Enhancement of the adhesion and anticorrosive properties of an epoxy coating by the application of a cerium based film10.1016/j.ijadhadh.2022.103221 ↗
2. A study of the thermal properties of alumina/glycidoxy propyl POSS/epoxy adhesives10.1016/j.ijadhadh.2023.103368 ↗
3. Study on synthesizing new urethane epoxy adhesives and their adhesive properties on different substrates10.1016/j.ijadhadh.2022.103174 ↗
4. Enhanced mechanical properties and flame retardant of epoxy resin by using of GOPOS decorated MWCNTs10.1007/s00289-021-03736-4 ↗
5. Modulating impact resistance of flax epoxy composites with thermoplastic interfacial toughening10.1016/j.compositesa.2021.106628 ↗
6. Impacts of phosphorous-linked epoxidized vegetable oil on mechanical behaviors and flammability properties of silica reinforced epoxy composite10.1016/j.tca.2020.178722 ↗
7. Improvement of structural, thermal and mechanical properties of epoxy composites and bonded joints exposed to water environment by incorporating boron nanoparticles10.1016/j.ijadhadh.2022.103141 ↗
8. Tough epoxy/cyanate ester resins with improved thermal stability, lower dielectric constant and loss based on unique hyperbranched polysiloxane liquid crystalline10.1002/pat.3590 ↗
9. Fabrication of adduct filled glass fiber/epoxy resin laminate composites and their physical characteristics10.1007/s00289-015-1553-7 ↗
10. Hydroxyl-functionalized block co-polyimide enables simultaneously improved toughness and strength of tetrafunctional epoxy resin10.1016/j.compscitech.2022.109787 ↗
11. ZIF-8@Co-doped boronate ester polymer core-shell particles: catalytically enhancing the nonflammability and smoke suppression of epoxy resin10.1016/j.polymdegradstab.2022.109877 ↗
12. Effect of core–shell rubber (CSR) nano-particles on mechanical properties and fracture toughness of an epoxy polymer10.1016/j.polymer.2015.04.002 ↗
13. The effect of repeated alkali pretreatments on the morphological characteristics of cellulose from oil palm empty fruit bunch fiber-reinforced epoxy adhesive composite10.1016/j.ijadhadh.2022.103095 ↗
14. Bacterial cellulose filled epoxy resin-based green composites: fabrication and characterization10.1080/09276440.2019.1680205 ↗
15. Silane coupling agent with amine group grafted nano/micro-glass fiber as novel toughener for epoxy resin: fabrication and mechanical properties
16. Influence of silanized bacterial cellulose on the mode I interlaminar fracture toughness of glass fiber filled with epoxy resin
17. Improvement of the mode I interlaminar fracture toughness of glass fiber/epoxy composites using polystyrene electrospun nanofibres10.1007/s00289-018-2308-z ↗
18. Fracture toughness and surface morphology of micro/nano sized fibrils-modified epoxy resin
19. Significant enhancement of fracture toughness and mechanical properties of epoxy resin using CTBN-grafted epoxidized linseed oil
20. Improvement the mode I interlaminar fracture toughness of glass fiber reinforced phenolic resin by using epoxidized soybean oil10.1007/s00289-018-2296-z ↗
21. Simultaneously improving the flame retardancy and toughness of epoxy composites with hyperbranched phosphorus-containing polysiloxane functionalized halloysite nanotubes10.1016/j.eurpolymj.2022.111564 ↗
22. Preparation of hyperbranched polymeric ionic liquids for epoxy resin with simultaneous improvement of strength and toughness10.1016/j.polymer.2019.01.003 ↗
23. Preparation of one-component addition-cure liquid silicone rubber coating with enhanced storage stability and bond strength10.1007/s10854-021-06597-9 ↗
24. Epoxy-based siloxane composites for electronic packaging: effect of composition and molecular structure of siloxane matrix on their properties10.1016/j.compscitech.2022.109456 ↗
25. Rational design of a functionalized silicone polymer for modifying epoxy-based composites10.1016/j.jmrt.2022.06.086 ↗
26. Synthesis of a comb-like silicone-epoxy co-polymer with high thermal stability and mechanical properties for ablative materials10.1016/j.reactfunctpolym.2020.104742 ↗
27. Fabrication of a bi-hydroxyl-bi-DOPO compound with excellent quenching and charring capacities for lignin-based epoxy resin10.1016/j.ijbiomac.2022.02.103 ↗
28. Facile synthesis of lignin-based epoxy resins with excellent thermal-mechanical performance10.1016/j.ijbiomac.2021.03.203 ↗
29. Preparation and properties of novel bio-based epoxy resin thermosets from lignin oligomers and cardanol10.1016/j.ijbiomac.2021.10.203 ↗
30. A lignin-based epoxy/TiO2 hybrid nanoparticle for multifunctional bio-based epoxy with improved mechanical, UV absorption and antibacterial properties10.1016/j.ijbiomac.2022.04.229 ↗
31. A review on lignin-based epoxy resins: lignin effects on their synthesis and properties10.1016/j.ijbiomac.2022.12.322 ↗
32. Effects of lignin-based flame retardants on flame-retardancy and insulation performances of epoxy resin composites10.1007/s13726-022-01052-w ↗
33. Highly effective flame retardantm lignin polyacrylonitrile composite prepared via solution blending and phosphorylation10.1016/j.polymdegradstab.2020.109362 ↗
34. Biopolymer gel swelling analysed with scaling laws and Flory–Rehner theory10.1016/j.foodhyd.2015.01.025 ↗
35. Controlled degradation of epoxy networks: analysis of crosslink density and glass transition temperature changes in thermally reworkable thermosets10.1016/j.polymer.2004.01.011 ↗
36. The role of β relaxations in determining the compressive properties of an epoxy amine network modified with POSS and mono-functional epoxy resins10.1016/j.polymertesting.2020.106873 ↗
37. Dynamic mechanical and 13C n.m.r. analyses of the effects of antiplasticization on the β secondary relaxation of aryl-aliphatic epoxy resins10.1016/S0032-3861(97)00423-0 ↗
38. Vaughan. Stoichiometry and molecular dynamics of anhydride-cured epoxy resin incorporating octa-glycidyl POSS Co-Monomer10.1016/j.polymer.2020.123312 ↗
39. An insight into molecular relaxation of organic-inorganic hybrids based on epoxy resin
40. Flexural modulus of epoxy composite reinforced with Arecanut husk fibre (AHF): a mechanics approach10.1016/j.matpr.2019.09.109 ↗
41. A lightweight and high-strength epoxy composites based on graphene oxide modified kapok fibers
42. Enhanced toughness and degradable ability of polybenzoxazines polyhexahydrotriazines interpenetrating polymer networks by sequential cure method
43. Double-Interpenetrating-network lignin-based epoxy resin adhesives for resistance to extreme environment10.1021/acs.biomac.1c01204 ↗
44. Toughening of epoxy resin with balanced performance by in situ constructing interfacial bonding and elastic segments into epoxy network10.1016/j.matchemphys.2021.125529 ↗
45. Toughening of in situ polymerized cyclic butylene terephthalate by chain extension with a bifunctional epoxy resin10.1016/j.eurpolymj.2011.10.017 ↗
46. Supramolecularly toughened and elastic epoxy resins by grafting 2-ureido-4[1H]-pyrimidone moieties on the side chain10.1016/j.eurpolymj.2019.04.001 ↗
47. Toughening shape-memory epoxy resins via sacrificial hydrogen bonds10.1039/D1PY01625C ↗
48. Dynamic mode II interlaminar fracture toughness of electrically modified carbon/epoxy composites10.1016/j.ijimpeng.2021.104030 ↗
49. Effect of rubber modification on fracture toughness of epoxy adhesives under mode I and mode II loading10.1016/j.tafmec.2022.103604 ↗
50. A comparative study on nanoinclusion effect of MoS2 nanosheets and MoS2 quantum dots on fracture toughness and interfacial properties of epoxy composites10.1016/j.compositesa.2021.106419 ↗
51. Interlaminar fracture toughness behaviour of carbon fibre reinforced polymer with epoxy-dicarboxylic acid vitrimer matrix
52. Rheological percolation behaviour and fracture properties of nanocomposites of MWCNTs and a highly crosslinked aerospace-grade epoxy resin system10.1016/j.compositesa.2017.11.012 ↗
53. Role of particle cavitation in rubber-toughened epoxies: 1. Microvoid toughening10.1016/0032-3861(96)00295-9 ↗
54. Akikazu Matsumoto, Non-destructive observation of internal structures of epoxy monolith and co-continuous network polymer using X-ray CT imaging for elucidation of their unique mechanical features and fracture mechanism