Enhancing interfacial adhesion through coupling agent incorporation in plywood/ plastic waste composite materials
Source abstract
Abstract
The objective this study was to fabricate 5-ply boards using virgin and recycled high-density polyethylene (vHDPE and rHDPE) films as formaldehyde-free adhesives, respectively. To enhance the interfacial adhesion between the wood veneer and HDPE film, various loadings (0, 3, 6, 8, and 11 wt%) of polyethylene grafted maleic anhydride (PE-g-MA) were applied as a coupling agent. The physical and mechanical performance of the resulting plywood boards was evaluated using standard test methods, with a UF resin-bonded plywood used as a control for comparison. All materials used were for commercial-scale plywood production. Fourier transform infrared spectroscopy (FT-IR) results provided valuable information about chemical interactions that occurred during the coupling of poplar fibers with HDPE using PE-g-MA. The experimental results showed that the mechanical and physical properties of the plywood boards improved as the amount of coupling agent increased from 0 to 11 wt%. PE-g-MA played a crucial role in the properties of plywood boards made with rHDPE and vHDPE by enhancing the interfacial bonding ability between the HDPE and adjacent veneers, leading to good stress propagation and improved mechanical properties. The properties of samples bonded with vHDPE were significantly more improved than those made with rHDPE, likely due to the presence of color pigments, additives, fillers, and impurities in the rHDPE, which made the coupling agent less effective. In addition, the results demonstrated that the samples made with rHDPE and vHDPE were superior to the plywood bonded with UF resin (control), and the optimal content of the coupling agent was found to be 8 and 11 wt%. These findings suggest that incorporating recycled HDPE films and using coupling agents, such as PE-g-MA, can produce high-quality plywood composite materials with improved mechanical and physical properties, providing an eco-friendly alternative to traditional UF resin-bonded plywood.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Wood Treatment and Properties · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Optimization of some panel manufacturing parameters for the best bonding strength of plywood10.1016/j.ijadhadh.2013.05.007 ↗
2. Effects of surface modification methods on mechanical and interfacial properties of high-density polyethylene-bonded wood veneer composites10.1007/s10086-016-1589-9 ↗
3. Research progress of wood-based panels made of thermoplastics as wood adhesives10.3390/polym14010098 ↗
4. Production of yellow poplar interior plywood with cottonseed-based protein adhesives10.22382/wfs-2021-20 ↗
5. Preparation and characterization of wood-plastic plywood bonded with high density polyethylene film10.1007/s00107-013-0733-0 ↗
6. Utilization of polypropylene film as an adhesive to prepare formaldehyde-free, weather-resistant plywood-like composites: process optimization, performance evaluation, and interface modification
7. Reduction of formaldehyde emission from plywood10.1080/01694243.2012.739016 ↗
8. Adhesion properties of soy protein adhesives enhanced by biomass lignin10.1016/j.ijadhadh.2017.02.017 ↗
9. Fabrication and characterization of HDPE resins as adhesives in plywood10.1007/s00107-016-1117-z ↗
10. Environmentally-friendly high-density polyethylene-bonded plywood panels10.3390/polym11071166 ↗
11. Selected properties of plywood bonded with low-density polyethylene film from different wood species
12. Comparison of protein-based adhesive resins for wood composites10.1007/s10086-006-0804-5 ↗
13. Soy meal adhesive with high strength and water resistance via carboxymethylated wood fiber-induced crosslinking10.1007/s10570-021-03732-x ↗
14. Lignin and lignin-derived compounds for wood applications—a review10.3390/molecules26092533 ↗
15. Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues10.1163/156856106777638635 ↗
16. Plastic bonded plywood using waste polypropylene container10.1016/j.matpr.2022.07.026 ↗
17. Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol-formaldehyde adhesive10.1016/j.compositesb.2010.09.012 ↗
18. Temperature modulated DSC for composition analysis of recycled polyolefin blends10.1016/j.polymertesting.2022.107656 ↗
19. A comparative study of several properties of plywood bonded with virgin and recycled LDPE films10.3390/ma15144942 ↗
20. Preparation and properties of wood plastic composites made of recycled high-density polyethylene10.1177/0021998309103089 ↗
21. Influence of silane surface modification of veneer on interfacial adhesion of wood–plastic plywood10.1016/j.apsusc.2013.10.098 ↗
22. Effects of plasma treatment in enhancing the performance of wood fibre-polypropylene composites10.1016/j.compositesa.2004.06.023 ↗
23. Chemical treatments on plant-based natural fibre reinforced polymer composties: an overview10.1016/j.compositesb.2012.04.053 ↗
24. Effects of wood fiber esterification on properties, weatherabiliy and biodurabiliy of wood plastic composites10.1016/j.polymdegradstab.2013.03.027 ↗
25. Mechanical properties of wood-fiber reinforced polypropylene composites: effect of a novel compatibilizer with isocyanate functional group10.1016/j.compositesa.2006.05.005 ↗
26. Fabrication and interfacial modification of wood/recycled plastic composite materials10.1016/j.compositesa.2007.10.017 ↗
27. Effect of pre-pressing of veneer on the glue-ability and properties of veneer-based products10.1007/s00107-010-0486-y ↗
28. Bond quality of poplar plywood reinforced with hemp fibers and lignin-phenolic adhesives
29. 2020
30. 2020
31. 2018
32. 2014
33. 2018
34. 2020
35. 2018
36. 2020
37. Determination of some technological properties of injection molded pulverized-HDPE based composites reinforced with micronized waste tire powder and red pine wood wastes10.1007/s10924-020-01726-7 ↗
38. Preparation of plywood panels using waste milk pouches as an adheshive
39. Characteristics of wood–fiber plastic composites made of recycled materials10.1016/j.wasman.2008.09.012 ↗