Investigation of mechanical properties of aluminum–glass fiber-reinforced polyester composite joints bonded with structural epoxy adhesives reinforced with silicon dioxide and graphene oxide particles
Source abstract
Abstract
In this work, to investigate the mechanical properties of aluminum-glass fiber-reinforced polyester composite joints bonded with structural epoxy adhesives reinforced with silicon dioxide (SD) and graphene oxide (GO) particles, firstly, SD and GO particles were added to epoxy adhesive in varied weight percentages. After the surface treatment made by sanding aluminum and composite sheets with abrasive sandpaper, aluminum sheets and glass fiber-reinforced polyester composite sheets were bonded. Adhesives containing 0.2% SD and 0.25% GO had tensile strengths that were approximately 15.89% and 14.03% greater than neat epoxy, respectively. The lap shear strength of neat epoxy was improved with the addition of filler in all samples, and 0.2% SD and 0.25% GO -reinforced adhesives increased the shear strength of the neat epoxy by 66.57% and 125%, respectively. The adhesion, thin-layer cohesive and light-fiber tear were noted, as well as cohesive and fiber-tear failures based on the damaged surfaces of the samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Epoxy Resin Curing Processes · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Demir · 2016
2. Grafen ve naylon 6.6 nano elyaf katkılı yapıştırıcıların alüminyum-karbon elyaf takviyeli kompozit levhaların yapıştırma bağlantılarına farklı sıcaklık koşulları altında etkisi
3. Adams · 1997
4. Strength of double-reinforced adhesive joints10.1515/mt-2020-0024 ↗
5. Saraç · 2018
6. Gediktaş · 1995
7. Nano-aluminum oxide as a reinforcing material for thermoplastic adhesives10.1016/j.jiec.2011.12.001 ↗
8. Investigation of the effect of use of Nano-Al2O3, Nano-TiO2 and Nano-SiO2 powders on strength of single lap joints bonded with epoxy adhesive10.1016/j.compositesb.2019.02.007 ↗
9. Alüminyum oksit ve titanyum dioksit partikül takviyeli yapıştırıcılarla birleştirilmiş bağlantıların mekanik özelliklerinin deneysel olarak belirlenmesi10.28948/ngumuh.295635 ↗
10. Carbon nanotubes and silver flakes filled epoxy resin for new hybrid conductive adhesives10.1016/j.microrel.2011.03.020 ↗
11. Reinforcement and toughening mechanisms in polymer nanocomposites–carbon nanotubes and aluminum oxide10.1016/j.compositesb.2015.01.019 ↗
12. The synergy effect of Graphene/SiO2 hybrid materials on reinforcing and toughening epoxy resin10.1007/s12221-016-5862-8 ↗
13. Ekrem M, Erbakan N, Karabulut SE, Demir O, Adem Y ar, Gürol Ö, et al. Hibrit nano parçacıklarla takviye edilmiş epoksi yapıştırıcılar kullanılarak hava araçlarındaki bağlantıların iyileştirilmesi [n.d].
14. Enhanced mechanical performances of epoxy asphalt adhesives modified by graphene oxide
15. Effect of functionalised and non-functionalised GNPs addition on strength properties of high viscous epoxy adhesive and lap shear joints10.1016/j.polymertesting.2022.107680 ↗
16. Surface properties of plastic materials in relation to their adhering performance10.1002/1527-2648(20020503)4:5<280::AID-ADEM280>3.0.CO;2-Z ↗
17. Adhesion phenomena in bonded joints10.1016/j.ijadhadh.2012.04.007 ↗
18. Gültekin K, Korkmaz Y. AA2024-T3 alüminyum alaşımlarına uygulanan farklı yüzey hazırlama ve pürüzlülük işlemlerinin yapıştırma bağlantılarına etkisi. Gümüşhane Üniversitesi Fen Bilim Derg n.d.;11:1269–1281.
19. Experimental study on the influences of different surface treatment processes and adhesive type on the aluminum adhesive-bonded joint strength10.1080/15397734.2020.1777876 ↗
20. Influence of raw material surface roughening on the lap shearing strength and failure behavior of adhesively bonded aluminum joints10.1007/s00170-021-07859-w ↗
21. Experimental study on different adherend surface roughness on the adhesive bond strength10.1016/j.matpr.2017.07.115 ↗
22. Metallerin yapıştırılmasında yüzey hazırlama yöntemlerinin incelenmesi
23. Özdemir · 2018
24. Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys10.1016/j.ijadhadh.2005.07.001 ↗
25. Bor nitrür nanoplateletlerin ve nano Ag takviyeli yapısal yapıştırıcıların kayma dayanımı
26. Adhesive bond strength enhancing between carbon fiber reinforced polymer and aluminum substrates with different surface morphologies created by three sulfuric acid solutions10.1016/j.compositesa.2021.106427 ↗
27. Plastiklerin yapıştırılmasında yüzey hazırlama yöntemlerinin incelenmesi
28. Ebnesajjad · 2013
29. Forcum · 2010
30. Yılmaz · 2020
31. Effects of different surface cleaning procedures on the superficial morphology and the adhesive strength of epoxy coating on aluminium alloy 105010.1016/j.porgcoat.2015.05.005 ↗
32. Poly (vinylidene fluoride) nanofiber‐based piezoelectric nanogenerators using reduced graphene oxide/polyaniline10.1002/app.48517 ↗
33. The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites10.1016/j.carbon.2013.03.050 ↗
34. Tongur · 2020
35. Mechanical and thermal properties of epoxy resin nanocomposites reinforced with graphene oxide10.1080/03602559.2011.625381 ↗
36. Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties10.1016/j.carbon.2013.12.050 ↗
37. Epoxy resin composites with surface‐modified silicon dioxide nanoparticles: a review10.1002/app.39208 ↗
38. The effect of silicon dioxide and zinc borate on the flame retardancy, thermal and mechanical properties of jute/epoxy hybrid composite10.1080/15440478.2022.2131683 ↗
39. Investigation of properties graphene reinforced epoxy nanocomposites
40. Sarı · 2017
41. Investigation of microstructural and mechanical properties of dissimilar metal weld between AISI 420 and AISI 1018 STEELS10.1007/s13369-021-06243-w ↗
42. Noncovalent functionalization of graphene with end-functional polymers10.1039/b919074k ↗
43. Reduced graphene oxide: effect of reduction on electrical conductivity10.3390/jcs2020025 ↗
44. Flexible graphene films via the filtration of water-soluble noncovalent functionalized graphene sheets10.1021/ja800745y ↗
45. High-performance epoxy-based adhesives reinforced with alumina and silica for carbon fiber composite/steel bonded joints10.1177/0731684416665248 ↗
46. Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites10.1016/j.compscitech.2016.09.007 ↗
47. Effect of hydrogen bonds on the modulus of bulk polybenzoxazines in the glassy state10.1039/c3cp51001h ↗
48. Reactive silica nanoparticles turn epoxy coating from hydrophilic to super-robust superhydrophobic10.1039/C8RA10046B ↗
49. Investigating the effect of SiO2-graphene oxide hybrid as inorganic nanofiller on corrosion protection properties of epoxy coatings10.1016/j.surfcoat.2017.01.013 ↗
50. Improving tensile and flexural properties of SiO2-epoxy polymer nanocomposite10.1016/j.matpr.2017.12.243 ↗
51. Dispersion of SiO2 nano particles on epoxy based polymer nano composites and its characterization10.13005/ojc/340641 ↗
52. Study of SiO2 nanoparticles on the improved performance of epoxy and fiber composites10.1177/0731684405043552 ↗
53. Preparation of graphene oxide/epoxy nanocomposites with significantly improved mechanical properties10.1063/1.4892089 ↗
54. The role of functional groups on graphene oxide in epoxy nanocomposites10.1016/j.polymer.2013.08.026 ↗
55. Enhanced mechanical properties of nanocomposites at low graphene content10.1021/nn9010472 ↗
56. Convenient preparation of tunably loaded chemically converted graphene oxide/epoxy resin nanocomposites from graphene oxide sheets through two-phase extraction10.1039/b915228h ↗
57. Influence of graphene oxide with different oxidation levels on the properties of epoxy composites10.1016/j.compscitech.2018.04.007 ↗
58. Mechanical properties of graphene oxide (GO)/epoxy composites10.1016/j.hbrcj.2014.06.001 ↗
59. Novel electrically conductive epoxy/reduced graphite oxide/silica hollow microspheres adhesives with enhanced lap shear strength and thermal conductivity10.1016/j.compscitech.2018.11.008 ↗
60. Özbek Ö, Çakır MV, Doğan NF. Halloysit nanotüp katkısının Al-GFRP Tek bindirmeli yapıştırma bağlantısında kayma dayanımına etkisi. J Mater Mechatronics A n.d.;3:117–128.10.55546/jmm.1109990 ↗
61. Adhesive strength of steel–epoxy composite joints bonded with structural acrylic adhesives filled with silica nanoparticles10.1080/01694243.2014.981469 ↗
62. The science of adhesion: part 1 surface and interfacial aspects10.1007/BF00552302 ↗
63. On adhesive properties of nano-silica/epoxy bonded single-lap joints10.1016/j.matdes.2016.01.055 ↗
64. On the tensile and shear strength of nano-reinforced composite interfaces10.1016/j.matdes.2003.10.018 ↗
65. Study on metal decorated oxidized multiwalled carbon nanotube (MWCNT)-epoxy adhesive for thermal conductivity applications10.1007/s10854-017-6621-3 ↗
66. 2012
67. Graphene nanoparticle effect on flexural and shear behaviors of adhesively bonded single lap joints of GFRP composites10.1007/s40430-021-02920-x ↗
68. Adhesion of metallic glass and epoxy in composite-metal bonding10.1016/j.compositesb.2017.09.044 ↗
69. Investigating the effects of reduced graphene oxide additive on the tensile strength of adhesively bonded joints at different extension rates10.1016/j.matdes.2015.12.006 ↗
70. Comparison of mechanical, electrical and thermal properties in graphene oxide and reduced graphene oxide filled epoxy nanocomposite adhesives10.1016/j.polymer.2018.03.005 ↗
71. Mechanical properties of adhesively single lap-bonded joints reinforced with multi-walled carbon nanotubes and silica nanoparticles10.1080/00218464.2016.1187069 ↗
72. Effect of using fibre reinforced epoxy adhesive on the strength of the adhesively bonded Single Lap Joints10.1016/j.compositesb.2022.110358 ↗