Effect of service temperature and hygrothermal aging coupling on mechanical properties of adhesively bonded BFRP-Aluminum alloy joints
Source abstract
Abstract
To study the coupled effect of hygrothermal aging and service temperature on the mechanical properties of adhesively bonded basalt FRP-aluminum alloy joints (BFRP-Al joints), the mechanical properties and failure mechanism of BFRP-Al joints at different temperatures before and after aging were analyzed in this paper. The accelerated aging test of the adhesively bonded joint was performed under the hygrothermal condition (80 °C&95% relative humidity), and the hygroscopic property of the joint were analyzed by the water absorption test. Then, the mechanical properties of the aged joints were measured at 80 °C, room temperature (RT 25 °C), and −40 °C. The failure mechanism of the joints under the coupling effect of hygrothermal aging and service temperature was analyzed based on the Differential Scanning Calorimetry (DSC) results. The results reveal that the BFRP-AL joint reaches moisture saturation after exposure to hygrothermal environment for 200 h, and the moisture absorption behavior complies with Fick`s law. Due to the decrease of material Tg caused by hygrothermal aging, the mechanical properties of the joint at 80℃ decrease more obviously after aging. Moreover, the failure modes of joint are altered as a result of hygrothermal aging and temperature coupling. A methodology for predicting the performance of bonded joints was established based on the variation laws in Tg and failure load, taking into consideration the effects of hygrothermal aging and service temperature which can provide guidance for the lifetime design of the hygrothermal aged adhesive structures within the entire service temperature range.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Analysis method and case study of the lightweight design of automotive parts and its influence on carbon emissions[J]10.3390/pr10122560 ↗
2. Lightweight glass fiber-reinforced polymer Composite for automotive bumper applications: a review[J]10.3390/polym15010193 ↗
3. Lightweight vehicle underbody design[J]10.1016/j.repl.2017.11.014 ↗
4. Analysis of the impact of vehicle lightweighting on recycling benefits considering life cycle energy reductions[J]10.1016/j.resconrec.2020.105118 ↗
5. Geometrical study of mixed adhesive joints for high-temperature applications[J]10.1080/01694243.2015.1121801 ↗
6. Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive[J]10.1016/j.compstruct.2016.05.034 ↗
7. Significantly improved shear, dynamic-mechanical, and mode II fracture performance of seawater aged basalt/epoxy composites: The impact of halloysite nanotube reinforcement[J]
8. Experimental study on the flexural behavior of RC beams strengthened with prestressed BFRP laminates[J]10.1016/j.engstruct.2020.111801 ↗
9. A study on the strength of adhesively bonded joints with different adherends[J]10.1016/j.compositesb.2014.03.001 ↗
10. Research in failure behaviors of hybrid single lap aluminum-CFRP (plain woven) joints[J]10.1016/j.tws.2021.107488 ↗
11. Mechanical behavior and progressive failure analysis of riveted, bonded and hybrid joints with CFRP-aluminum dissimilar materials[J]10.1016/j.tws.2019.03.007 ↗
12. An updated review of adhesively bonded joints in composite materials[J]10.1016/j.ijadhadh.2016.10.010 ↗
13. Experimental investigation on environmental degradation of automotive mixed-adhesive joints. Int J Adhesion Adhes
14. Rapid prediction method of failure load for hygrothermally aged CFRP–aluminum alloy single lap joints[J]10.1016/j.compstruct.2020.112603 ↗
15. Experimental study on basalt FRP/steel single-lap joints under different loading rates and temperatures[J]10.1016/j.compstruct.2016.02.061 ↗
16. High-temperature effect on the tensile mechanical properties of unidirectional carbon fiber-reinforced polymer plates[J]10.3390/ma14237214 ↗
17. Combined effects of sustained tensile loading and elevated temperatures on the mechanical properties of pultruded BFRP plates[J]10.1016/j.conbuildmat.2017.06.026 ↗
18. Effect of moderately elevated temperatures on bond behaviour of CFRP-to-steel bonded joints using different adhesives[J]10.1016/j.conbuildmat.2020.118057 ↗
19. Mechanical characterization of steel/CFRP double strap joints at elevated temperatures[J]10.1016/j.compstruct.2011.01.010 ↗
20. Effect of hygrothermal aging on the high-temperature interlaminar mechanical properties of CFRP under a complex stress state[J].J10.1080/00218464.2022.2048823 ↗
21. Experimental study of hygrothermal ageing effects on failure modes of non-crimp basalt fibre-reinforced epoxy composite[J]10.1016/j.compstruct.2021.114415 ↗
22. Hygrothermal durability of glass and carbon fiber reinforced composites–a comparative study[J]10.1016/j.compstruct.2018.12.034 ↗
23. Effect of moisture-heat coupling on mechanical behavior of nano-SiO2 adhesives and CFRP-steel lap joints[J]10.1016/j.tws.2022.110391 ↗
24. Effect of hygrothermal aging and cyclic thermal shocks on the mechanical performance of single-lap adhesive joints[J]10.1016/j.ijadhadh.2020.102584 ↗
25. Comparative study on mechanical properties of aluminum alloy and BFRP single lap joints with hygrothermal aging[J]10.1080/00218464.2020.1712656 ↗
26. Degradation of single lap adhesively bonded composite joints due to hot water ageing[J]10.1080/00218464.2015.1076340 ↗
27. Numerical study of Geostationary Orbit thermal cycle effects of a tubular adhesive joint: Dynamic behavior[J]
28. Predicting fatigue damage in adhesively bonded joints using a cohesive zone model[J]10.1016/j.ijfatigue.2009.12.013 ↗
29. Predicting the strength of adhesively bonded joints of variable thickness using a cohesive element approach[J]10.1016/j.ijadhadh.2015.01.006 ↗
30. Effect of temperature on the mechanical properties of adhesively bonded basalt FRP-aluminum alloy joints in the automotive industry[J]10.1016/j.ijadhadh.2018.05.027 ↗
31. Investigating the failure behavior of hygrothermally aged adhesively bonded CFRP-aluminum alloy joints using modified Arcan fixture[J]10.1016/j.tws.2022.110303 ↗
32. Fan, Y., Liu, Z., Zhao, G., et al. Influence of hydrothermal aging under two typical adhesives on the failure of BFRP single lap joint[J]. Polymers, 2022, 14(9): 1721.10.3390/polym14091721 ↗
33. An investigation of hygrothermal effects on adhesive materials and double lap shear joints of CFRP composite laminates[J]10.1016/j.compositesb.2016.01.051 ↗