Effect of the surface morphology on the bonding performance of metal/composite hybrid structures
Source abstract
Abstract
Abstract Adhesives are typically used in metal/composite hybrid structures. In this study, a metal/composite hybrid structure was fabricated by bonding. The effect of the surface morphology on the bonding performance of metal/composite hybrid structures was evaluated. The surfaces of the metal bonding area were designed and machined for six different patterns, and several specimens were fabricated. The double-cantilever beam (DCB) test and the single-lap shear test on the metal/composite hybrid specimens were designed to verify the effect of different metal surface morphologies on the properties of the bonded joints. The experimental results indicate that this treatment can markedly improve the fracture toughness, peel strength, and shear strength of the metal/composite bonded joints. Among the specimens, the metal/composite hybrid structure with a ±45° groove structure exhibited the highest strength. Finally, the DCB test and the tensile shear test of the hybrid joint with a ±45°groove structure were simulated, and the nondeterministic method was used to simulate the adhesive layer. The strength and failure modes were consistent with the results of the experiments, thus verifying the feasibility of the simulation and the reinforcement scheme.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Surface modifications of Ti alloy with tunable hierarchical structures and chemistry for improved metal-polymer interface in deepwater composite riser10.1016/j.apsusc.2014.12.081 ↗
2. Effects of primer and annealing treatments on the shear strength between anodized Ti6Al4V and epoxy10.1016/j.ijadhadh.2014.10.004 ↗
3. Brockmann · 2008
4. Adhesion phenomena in bonded joints10.1016/j.ijadhadh.2012.04.007 ↗
5. Through-thickness strain field measurement in a composite/aluminium adhesive joint10.1016/j.compositesa.2008.04.018 ↗
6. Failure of carbon composite-to-aluminium joints with combined mechanical fastening and adhesive bonding10.1016/j.compstruct.2006.04.013 ↗
7. Stress and failure analysis of mechanically fastened joints in composite laminates10.1016/S0263-8223(00)00119-7 ↗
8. Surface modification of aircraft used composites for adhesive bonding10.1016/j.ijadhadh.2014.01.004 ↗
9. Adhesive bonding of carbon fibre/epoxy laminates: correlation between surface and mechanical properties10.1016/j.surfcoat.2012.07.085 ↗
10. Characterisation of composite-titanium alloy hybrid joints using digital image correlation10.1016/j.compstruct.2015.12.023 ↗
11. Milan Brandt. Hierarchical surface features for improved bonding and fracture toughness of metal–metal and metal–composite bonded joints10.1016/j.ijadhadh.2015.12.005 ↗
12. The effect of titanium surface treatment on the interfacial strength of titanium – thermoplastic composite joints10.1016/j.ijadhadh.2016.10.007 ↗
13. Dance · 2010
14. Surfi-Sculpt revolutionary surface processing with an electron beam
15. Realization and experimental analysis of electron beam Surfi-Sculpt on Ti-6Al-4V alloy10.1016/S1875-5372(14)60091-6 ↗
16. Structural performance of Comeld hybrid metal-to-composite joints
17. Optimisation of the protrusion geometry in Comeld joints10.1016/j.compscitech.2011.02.001 ↗
18. Effect of forming parameters on electron beam Surfi-Sculpt protrusion for Ti–6Al–4V10.1016/j.matdes.2015.03.065 ↗
19. Investigation on a novel bolted joint scheme for foam inserted top-hat stiffened composite plates
20. ASTM · 2001
21. A study on mixed fracture characteristics of composite single lap joint (SLJ) combining mixed continuum damage model and critical zone size-based approach10.1016/j.ijadhadh.2019.102447 ↗
22. An adaptation of mixed-mode I + II continuum damage model for prediction of fracture characteristics in adhesively bonded joint10.1016/j.ijadhadh.2017.10.008 ↗
23. A progressive failure model for composite laminates containing openings10.1177/002199839102500505 ↗
24. Cohesive zone method for failure analysis of scarf patch-repaired composite laminates under bending load
25. Delamination analysis of multi-angle composite curved beams using an out-of-autoclave materials10.1016/j.compstruct.2017.03.078 ↗
26. Failure load analysis of C-shaped composite beams using a cohesive zone model