Effect of salt spray ageing on the fracture of composite-to-metal bonded joints
Source abstract
Abstract
This work investigates the effect of long-term environmental exposure on the performance of composite-to-metal bonded joints. Specimens are manufactured using a carbon-fiber reinforced polymer (CFRP) co-bonded to a steel member with epoxy adhesive and aged in a salt spray chamber. The mixed-mode fracture behavior of the non-aged and aged specimens is assessed using the mixed-mode bending (MMB) test apparatus. The fracture energy is calculated using the finite elements method and an analytical approach, the strain-based method (SBM). The SBM showed to be a simple and accurate method to obtain the total fracture energy and the fracture mode ratio of the bi-material specimen. Ageing increased the fracture toughness at crack initiation by 27% for specimens loaded at 20% mode II and 7% for specimens loaded at 15% mode II. This can be related to the shear behavior and plasticization of the adhesive material. During crack propagation, the fracture toughness remained similar for specimens loaded at 20% mode II and decreased by 15% in specimens loaded at 15% mode II. Fractography analysis together with chemical characterization showed that the penetration of moisture at the edges of the fracture surface produced adhesive failure in these regions affected by moisture. Moreover, the failure mode at the unaffected regions of the fracture surface shifted from cohesive to a combination of thin-layer cohesive and adhesive failure after ageing. The results contributed to describe the effect of ageing on the fracture behavior of bonded materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. An updated review of adhesively bonded joints in composite materials10.1016/j.ijadhadh.2016.10.010 ↗
2. Effect of humidity absorption by the adhesive on the performances of bonded composite repairs in aircraft structures10.1016/j.compositesb.2012.01.028 ↗
3. Fracture characterization of concrete-epoxy interface affected by moisture10.1016/j.mechmat.2010.09.001 ↗
4. A review on the temperature and moisture degradation of adhesive joints
5. The effect of moisture and temperature on the properties of an epoxide-polyamide adhesive in relation to its performance in single lap joints10.1016/0143-7496(82)90028-8 ↗
6. Design and ageing of adhesives for structural adhesive bonding – a review
7. Experimental and numerical investigation of the static response of environmentally aged adhesively bonded joints10.1016/j.ijadhadh.2012.08.007 ↗
8. Experimental and numerical investigation of balanced Boron/Epoxy single lap joints subjected to salt spray aging10.1016/j.ijadhadh.2016.01.009 ↗
9. Strength of carbon/epoxy composite single-lap bonded joints in various environmental conditions10.1016/j.compstruct.2009.09.009 ↗
10. Effect of various hygrothermal environments on the failure of adhesively bonded composite single-lap joints10.1177/0021998312453357 ↗
11. Interlaminar adhesion assessment of carbon-epoxy laminates under salt water ageing using peel tests
12. Influence of hydrothermal ageing on the mechanical properties of an adhesively bonded joint with different adherends10.1016/j.compositesb.2019.02.032 ↗
13. Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests10.1007/s40430-017-0959-6 ↗
14. Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests10.1016/j.compstruct.2016.12.058 ↗
15. Durability of bonded FRP-to-steel joints: effects of moisture, de-icing salt solution, temperature and FRP type10.1016/j.compositesb.2017.03.049 ↗
16. Experimental and numerical investigation of the residual strength of steel-composites bonded joints: effect of media and aging condition10.1016/j.compositesb.2019.106977 ↗
17. Material degradation of cfrp-to-steel joints subjected to salt fog10.1016/j.compositesb.2019.05.095 ↗
18. Environmental degradation of the interfacial fracture energy in an adhesively bonded joint10.1016/S0013-7944(02)00004-8 ↗
19. Measurement of adhesive joint fracture properties as a function of environmental degradation10.1016/S0143-7496(98)00028-1 ↗
20. Fracture R-curve of a toughened epoxy adhesive as a function of irreversible degradation10.1016/j.msea.2010.04.099 ↗
21. The influence of water on the fracture envelope of an adhesive joint10.1016/j.tafmec.2017.01.001 ↗
22. Effect of humidity on the mechanical properties of adhesively bonded aluminium joints
23. The effects of manufacturing-induced and in-service related bonding quality reduction on the mode-I fracture toughness of composite bonded joints for aeronautical use10.1016/j.compositesb.2012.05.052 ↗
24. Effect of moisture on pure mode I and II fracture behaviour of composite bonded joints10.1016/j.ijadhadh.2016.01.010 ↗
25. Experimental investigation and finite element modeling of mixed-mode delamination in a moisture-exposed carbon/epoxy composite10.1016/j.compositesa.2015.11.017 ↗
26. Influence of adverse temperature and moisture conditions on the fracture behaviour of single-strap repairs of carbon-epoxy laminates10.1016/j.ijadhadh.2019.102452 ↗
27. Application of fracture mechanics to predict the failure load of adhesive joints used to bond CFRP laminates to steel members10.1016/j.conbuildmat.2011.07.040 ↗
28. Mixed-mode I/II fracture behavior of asymmetric adhesively-bonded pultruded composite joints10.1016/j.engfracmech.2013.11.014 ↗
29. Strain-based methodology for mixed-mode I+II fracture: a new partitioning method for bi-material adhesively bonded joints10.1080/00218464.2019.1565756 ↗
30. ASTM B117-18 · 2018
31. On the influence of glass fiber mat on the mixed-mode fracture of composite-to-metal bonded joints10.1016/j.compstruct.2020.113109 ↗