journal article·2020-07

Review of experimental techniques for impact property of adhesive bonds

Min You, Ming-Bo Li, You-Lu Yuan, Gao Lin, Fu-Wei Ma, Ling-Feng Du, Shan-Jie Tang

Publisher page

Abstract

Abstract Assessing the impact property of the adhesives and the joints requires specific suitable experimental methods. Especially the most of the adhesives are sensitive to the strain rate that they must have to meet when a load is applied abruptly on the adhesive and adhesively bonded joints. In general, the impact tests of adhesive joints are usually divided into three ranges including low, medium and high velocity. Sometimes a body in hypervelocity collides with another one is faster than the sound velocity. This document aims to review the experimental methods that have been previously undertaken in this field. Discussed research topics include the impact test methods for the adhesive joints under low, medium, high and hypervelocity. The standard impact tests for adhesive joints (involving both bonded blocks and strips) are typically test methods with low-velocity and they are discussed. In the medium-velocity range, the applications of drop weight, inertia wheel, wedge falling, servohydraulic and pneumatic test methods are presented. In the high-velocity range, the advance of Split-Hopkinson bar as a special apparatus conceived to test materials is reported. The final section describes two practical applications of adhesive joints impacted under hypervelocity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Transportation Safety and Impact Analysis · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. An experimental method dedicated to the dynamic characterization of structural adhesives under drop weight conditions10.1016/j.ijadhadh.2019.01.031 ↗
2. Improvement in impact strength of composite joints for the automotive industry10.1016/j.compositesb.2017.11.038 ↗
3. Experimental procedure to characterize the mode I dynamic fracture toughness of advanced epoxy resins10.1016/j.engfracmech.2014.05.010 ↗
4. 2018 · p2
5. Adhesives and adhesive joints under impact loadings: an overview10.1080/00218464.2017.1282349 ↗
6. Impact behaviour of adhesively bonded joints
7. Impact behaviour of bonded mild steel lap joints10.1016/0143-7496(84)90055-1 ↗
8. Adhesive-bonded car body repairs withstand crash tests10.1016/0143-7496(83)90112-4 ↗
9. Impact tests
10. The Pendulum impact test for adhesives and adhesive joints
11. A rate-dependent cohesive zone model for adhesively bonded joints loaded in mode I10.1163/156856109X411238 ↗
12. A critical assessment of the block impact test for measuring the impact strength of adhesive bonds10.1016/0143-7496(95)00050-X ↗
13. A viscoelastic‐viscoplastic model with non associative plasticity for the modelling of bonded joints at high strain rates10.1016/j.ijadhadh.2016.07.015 ↗
14. Identification of a new failure criterion for toughened epoxy adhesive10.1016/j.engfracmech.2010.09.016 ↗
15. Impact strength of joints bonded with-high strength pressure sensitive adhesive10.1016/j.ijadhadh.2014.09.005 ↗
16. 2005
17. ASTM D950-03 · 2011
18. 1998
19. 2003
20. ISO 179-1-2010 · 2010
21. ISO 179-2-1997 · 1997
22. ASTM D6110 · 2018
23. ISO 180-2000 · 2000
24. ASTM D256-10(2018)
25. ASTM D4812 · 2011
26. Effect of adhesive thickness on the impact toughness of butt-joints10.4028/www.scientific.net/AMR.230-232.1350 ↗
27. Effect of notch depth on the adhesively bonded steel butt-joint under Charpy impact test
28. Effect of shock temperature on the impact toughness of butt-joint
29. Effect of alkali on the impact toughness of adhesively bonded joints10.4028/www.scientific.net/AMM.166-169.1904 ↗
30. Instrumented guillotine impact testing apparatus10.1016/0143-7496(88)90056-5 ↗
31. Redesign of adhesively bonded box beam sections for improved impact performance10.1016/0143-7496(90)90095-F ↗
32. Shear properties of polyurethane ductile adhesive at low temperatures under high strain rate conditions10.1016/j.compositesb.2018.08.060 ↗
33. The impact damage and residual load capacity of composite stepped bonding repairs and joints10.1016/j.compositesb.2018.09.096 ↗
34. Determining the impact resistance of electrically conductive adhesives using a falling wedge test10.1109/TCAPT.2003.817646 ↗
35. Dynamic fracture analysis of adhesively bonded joints using explicit methods10.2514/1.26088 ↗
36. Dynamic impact testing with servohydraulic testing machines10.1051/jp4:2006134107 ↗
37. Effect of the secondary transition on the behaviour of epoxy adhesive joints at high rates of loading10.1080/00218469608015206 ↗
38. 3D optical displacement measurements on dynamically loaded adhesively bonded T-peel specimens10.1016/j.ijadhadh.2014.07.013 ↗
39. Laminated glass for blast mitigation: role of interlayer properties
40. Evaluation of impact strength of an acrylic adhesive resin under low temperatures in an aluminum alloy joint10.2464/jilm.55.473 ↗
41. Clamped Hopkinson bar
42. A review of the torsional split Hopkinson bar10.1155/2018/2719741 ↗
43. High-strain-rate testing of adhesive specimens and joints by Hopkinson bar technique
44. Design and development of a novel strain gauge automatic pasting device for mini split Hopkinson pressure bar10.1063/1.5022304 ↗
45. Material response at hypervelocity impact conditions using laser induced shock waves10.1016/0734-743X(93)90027-5 ↗
46. Adhesive joints under impacting shock wave loading
47. Mode I characterization of toughened epoxy adhesive joints under shock-wave loading10.1016/j.ijadhadh.2019.02.001 ↗
48. Multi-turn railguns: concept analysis and experimental results10.1109/20.911876 ↗
49. Experimental and numerical investigation of the high-velocity impact resistance of fiber metal laminates and Al 6061-T6 by using electromagnetic launcher10.1007/s12206-019-0222-4 ↗
50. Forces of rails for electromagnetic railguns10.1016/j.apm.2011.09.036 ↗
51. BS EN 29653 · 2000
52. 3-D modelling of impact velocity on the stress-strain distribution in adhesive layer of metal-to-metal joint
53. 3-D finite element analysis of bonded joints under impact loading10.4028/www.scientific.net/AMR.97-101.763 ↗
54. Numerical study of the local behaviour of adhesive bonds under dynamic loading10.1080/01694243.2016.1145321 ↗
55. Mechanical behaviour of adhesively bonded polyethylene tapping tees10.1016/j.ijadhadh.2015.12.002 ↗
56. Effect of active rubber powder on structural two-component epoxy resin and its mechanical properties10.1080/01694243.2018.1428040 ↗
57. The selected aspects of the research into impact loading of adhesive joints in block samples—the influence of the sample geometry
58. Initial research of impact strength in adhesive joints10.4028/www.scientific.net/SSP.237.160 ↗
59. Numerical analysis of impact loading of adhesive joints
60. 2005
61. The impact wedge-peel performance of structural adhesives10.1023/A:1004793730352 ↗
62. Surface preparation effect on performance of adhesively-bonded graphite-epoxy-composites subjected to impact10.1163/156856107779976132 ↗
63. Bandekar · 2010
64. Resistance to cleavage of core– shell rubber/epoxy composite foam adhesive under impact wedge–peel condition for automobile structural adhesive10.3390/polym11010152 ↗
65. ASTM E23-18 · 2018
66. 2016
67. 2016
68. 2016
69. Influence of filler size on impact properties of PP-elastomer-filler ternary composites10.1163/016942411X556060 ↗
70. Experimental and theoretical investigations of the high performance blends of PEEK/PEI10.1515/polyeng-2017-0002 ↗
71. ASTM D256-2010E1 · 2010
72. Toughening of wood-plastic composites based on silane/peroxide macro crosslink poly (propylene) systems
73. A new approach to compatibilization study of EVA/PMMA polymer blend used as an optical fibers adhesive: mechanical, morphological and thermal properties10.1016/j.ijadhadh.2017.11.002 ↗
74. Fiber/matrix adhesion in glass fiber reinforced inorganic-organic polyurea/polysilicate resins10.4028/www.scientific.net/KEM.742.9 ↗
75. Preparation of carbon fibers coated with epoxy sizing agents containing degradable acetal linkages and synthesis of carbon fiber-reinforced plastics (CFRPs) for chemical recycling10.1038/s41428-019-0202-7 ↗
76. The impact resistance of structural adhesive joints10.1080/00218468708075421 ↗
77. Effect of notch depth on the butt-joint under izod impact test with material properties and mechanics analysis10.4028/www.scientific.net/AMR.644.197 ↗
78. An assessment of the impact performance of bonded joints for use in high energy absorbing structures10.1243/PIME_PROC_1985_199_102_02 ↗
79. 1984
80. Research of application of crash durable adhesive on a Chinese domestic car body10.1007/978-3-642-33835-9_81 ↗
81. Effect of curing procedure on the impact toughness of adhesively bonded joints
82. Effects of adherends recycling on the distribution of hardness in bonded region of adhesively bonded single lap joints10.1016/S0143-7496(03)00073-3 ↗
83. Theoretical calculation and numerical investigation on the thermal stress distribution in single lap joint
84. 2019
85. Numerical analysis of adhesive thickness on butt-joints under impact
86. Numerical analysis on the butt-joint under Izod impact test
87. Impact rupture of structural adhesive joints under different stress combinations10.1016/j.ijimpeng.2007.02.006 ↗
88. Bond thickness effect on impact response and damage of adhesively-bonded graphite-epoxy composites10.1163/156856107779976114 ↗
89. Toughened structural adhesives and their uses10.1016/0143-7496(81)90072-5 ↗
90. New impact specimen for adhesives-optimization of high-speed-loaded adhesive joints10.1016/S0143-7496(97)00032-8 ↗
91. Dynamic testing and simulation of hybrid joined bi-material beam10.1016/j.tws.2010.03.003 ↗
92. FEM stress analysis and strength of adhesive butt joints of similar hollow cylinders under static and impact tensile loadings10.1163/156856102320252895 ↗
93. Stress analysis and strength estimation of butt adhesive joints of dissimilar hollow cylinders under impact tensile loadings10.1163/156856103322112860 ↗
94. Ductile–brittle transitions in the fracture of plastically- deforming, adhesively-bonded structures. Part I: experimental studies10.1016/j.ijsolstr.2008.01.011 ↗
95. Behaviors of single-lap adhesive joints subjected to static and impact loads
96. Effects of impact on the failure of CFRP-Al bonded single-lap joints with different overlap length10.4028/www.scientific.net/AMR.181-182.814 ↗
97. Study on response of adhesively bonded joints under transverse impact10.4028/www.scientific.net/AMM.251.450 ↗
98. Experimental and FEM studies on mechanical properties of single-lap adhesive joint with dissimilar adherends subjected to impact tensile loadings10.1016/j.ijadhadh.2013.02.007 ↗
99. Effects of thermal ageing and impact loading on tensile properties of adhesively bonded fibre/epoxy composite joints10.1016/j.compositesb.2016.03.073 ↗
100. Impact loading of single lap joints of dissimilar lightweight adherends bonded with a crash-resistant epoxy adhesive10.1115/1.4034204 ↗