journal article·2014-04

The strength of the adhesively bonded T-joints with embedded supports

Murat Demir Aydin, Salih Akpinar

Publisher page

Abstract

Abstract In this study, mechanical properties of different T-joint configurations with embedded or non-embedded supports, subjected to tensile loading, were investigated experimentally and numerically. For this purpose, experimental studies were conducted on two different types of T-joint samples produced by using an adhesive film. Stress analyses in the T-joints were performed with a three dimensional non-linear finite element method by considering the geometrical non-linearity and non-linear material behaviors of both adhesives (FM73) and adherend (AA2024-T3). In conclusion, it can be stated that the variation of the geometry of the bonding zone, where the support was embedded, changed the stress distributions on the adhesively bonded joint. Accordingly, these variations had a strong impact on stress concentrations, the load bearing capacity and prolonged performance of these joints.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Mortensen · Compos Struct · 2002 · 56 · 16510.1016/S0263-8223(02)00002-8 ↗
2. Adams · 1997
3. Da Silva · Int J Adhes Adhes · 2002 · 22 · 31110.1016/S0143-7496(02)00009-X ↗
4. Grant · J. Adhes Sci Technol · 2009 · 23 · 31710.1163/156856108X383529 ↗
5. Hu · Int J Adhes Adhes · 2012 · 38 · 1710.1016/j.ijadhadh.2012.05.007 ↗
6. Li · Int J Adhes Adhes · 1999 · 19 · 31510.1016/S0143-7496(99)00007-X ↗
7. Shenoi · J Compos Mater · 1990 · 24 · 64410.1177/002199839002400604 ↗
8. Theotokoglou · J Reinforced Plast Compos · 1997 · 16 · 50310.1177/073168449701600602 ↗
9. Phillips · Composites Part A · 1998 · 29 · 46510.1016/S1359-835X(97)00081-X ↗
10. Apalak · Int J Adhes Adhes · 2003 · 23 · 11510.1016/S0143-7496(03)00003-4 ↗
11. Apalak · Int J Adhes Adhes · 1993 · 13 · 21910.1016/0143-7496(93)90025-5 ↗
12. Apalak · J Adhes Sci Technol · 1996 · 10 · 68110.1163/156856196X00616 ↗
13. Apalak · Int J Adhes Adhes · 1996 · 16 · 18710.1016/0143-7496(96)87013-8 ↗
14. Li · Int J Adhes Adhes · 1997 · 17 · 30310.1016/S0143-7496(97)00012-2 ↗
15. Apalak · J Adhes Sci Technol · 1997 · 11 · 115310.1163/156856197X00570 ↗
16. Apalak · J Adhes Sci Technol · 1999 · 13 · 125310.1163/156856199X00181 ↗
17. Khalili · Int J Adhes Adhes · 2011 · 31 · 34710.1016/j.ijadhadh.2010.12.005 ↗
18. ISO 527-1: Plastics-determination of tensile properties. Part 1: General principles; 1993.
19. Aydın · J Adhes · 2008 · 84 · 1510.1080/00218460801888359 ↗
20. ANSYS, the General Purpose Finite Element Software (Version 14.0) (Swanson Analysis Systems, Inc., Houston, Texas; 2012).
21. ISO 10365; 1992(E) Adhesives-designation of main failure patterns.