journal article·2022-03

Mechanical testing of adhesive, self-piercing rivet, and hybrid jointed aluminum under tension loading

Ahmed Hanafy Ibrahim, Duane S. Cronin

Publisher page

Abstract

Joining technologies play a crucial role in facilitating vehicle weight reduction, while maintaining structural performance and vehicle crashworthiness. Adhesive and self-piercing rivet (SPR) joining have individually been assessed in joining multi-material structures including aluminum alloys; however, limitations include fixturing requirements for adhesive joints and non-uniform load distribution within SPR joints. Hybrid (adhesive-SPR) joining has been proposed to potentially address these limitations. Yet, there is limited data regarding the strength, stiffness and energy absorption of hybrid joints under tension loading, and a lack of quantitative comparisons between adhesive, SPR and hybrid joints. In the present study, adhesive, SPR and hybrid joints were created in aluminum H-shaped tension specimens and the joint morphologies were quantified. Joint strength, stiffness and energy absorption were compared for two aluminum sheet metal alloys and three sheet thicknesses . Adhesive joints exhibited higher strength (up to 20.5%) and stiffness (up to 422%) than SPR joints, while SPR joints demonstrated higher energy absorption (up to 352%). Hybrid joints in 3 mm sheet exhibited reduced strength and stiffness relative to adhesive joints. Importantly, hybrid joints for 1 and 2 mm sheet thicknesses demonstrated strength and stiffness comparable to adhesive joints (<8% difference), and improved energy absorption compared to adhesive (up to 336%) and SPR joints (up to 53.5%), enhancing the performance of the individual methods. The study results could facilitate identifying suitable joining method, sheet thickness and alloy type according to structural applications (e.g. intrusion prevention versus energy-absorbing structures), and support future adoption and improvement of hybrid joints.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Advanced Welding Techniques Analysis · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. On material substitution in automotive BIWs-From steel to aluminum body sides10.1016/j.procir.2016.05.028 ↗
2. Comparative study of the application of steels and aluminium in lightweight production of automotive parts
3. Innovative and highly productive joining technologies for multi-material lightweight car body structures10.1007/s11665-014-0962-3 ↗
4. Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks10.1016/j.ijadhadh.2012.10.008 ↗
5. Experimental and numerical study of polyethylene hybrid joints: friction stir spot welded joints reinforced with adhesive10.1016/j.ijadhadh.2020.102555 ↗
6. Clinch-bonded hybrid joining for similar and dissimilar copper alloy, aluminium alloy and galvanised steel sheets10.1016/j.tws.2018.07.017 ↗
7. A parametric study on static behavior and load sharing of multi-bolt hybrid bonded/bolted composite joints10.1016/j.compositesb.2021.108897 ↗
8. Experimental investigation on environmental degradation of automotive mixed-adhesive joints10.1016/j.ijadhadh.2018.11.008 ↗
9. Innovative joining technologies for multi-material structures10.1007/s40194-013-0098-3 ↗
10. Metallic multi-material adhesive joint testing and modeling for vehicle lightweighting10.1016/j.ijadhadh.2019.102421 ↗
11. Experimental investigation on adhesively bonded U-shaped metallic joints using the Arcan test10.1016/j.jajp.2020.100010 ↗
12. Stiffness and strength analysis of hybrid adhesive bonded–resistance spot welded sandwich samples by means of virtual FE testing10.1080/00218464.2018.1553713 ↗
13. Crushing test of double hat-shaped members of dissimilar materials with adhesively bonded and self-piercing riveted joining methods10.1016/j.tws.2006.04.012 ↗
14. Adhesive joints under crash loading: experiments and modelling of the failure behaviour10.1007/BF03266550 ↗
15. Structural behaviour of aluminium self-piercing riveted joints: an experimental and numerical investigation10.1016/j.ijsolstr.2012.05.039 ↗
16. Mechanical properties of joints in 5052 aluminum made with adhesive bonding and mechanical fasteners10.1016/j.ijadhadh.2018.02.030 ↗
17. A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry10.1016/j.matdes.2009.08.031 ↗
18. Specimen's geometry related influences on load-bearing capacity of joining aluminium and UHSS by innovative shear-clinching
19. Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints10.1016/j.ijadhadh.2009.02.012 ↗
20. Parametric study of adhesively bonded single lap joints by the Taguchi method10.1163/156856108X309585 ↗
21. Property criteria for automotive Al-Mg-Si sheet alloys10.3390/ma7075047 ↗
22. Laser beam welding of AA5052, AA5083, and AA6061 aluminum alloys
23. Monotonic and cyclic fatigue properties of automotive aluminum alloys10.4271/840120 ↗
24. Mode I traction-separation measured using rigid double cantilever beam applied to structural adhesive
25. Benefit of structural adhesives in Full car crash applications10.4271/2014-01-0811 ↗
26. Quantification of mixed mode loading and bond line thickness on adhesive joint strength using novel test specimen geometry10.1016/j.ijadhadh.2020.102682 ↗
27. Influence of adhesive bond line thickness on joint strength10.1016/j.ijadhadh.2009.03.002 ↗
28. Self-piercing riveting-a review10.1007/s00170-017-0156-x ↗
29. Quality of self-piercing riveting (SPR) joints from cross-sectional perspective: a review10.1016/j.acme.2017.06.003 ↗
30. Hybrid technologies for joining ultra-high-strength boron steels with aluminum alloys for lightweight car body structures10.1016/j.procir.2014.10.089 ↗