The influence of ultrasonic vibration-assisted processing on mode-I fracture toughness of CFRP-bonded joints
Source abstract
Abstract
Abstract Ultrasonic vibration-assisted processing has a great advantage in adhesion formation of CFRP-bonded joints. Its high-frequency vibration can effectively improve the fluidity and crosslinking mixing of adhesive, thereby promoted the permeation of adhesive into the substrate microstructure and enhance the mechanical properties of adhesive bonded joints. In this work, ultrasonic vibration-assisted processing was applied to the CFRP adhesive bonded joints, and different processing time and adhesive types were considered. The results showed that ultrasonic vibration-assisted processing could improve mode-I fracture toughness of CFRP-bonded joints significantly, and the processing time was an important factor. Moreover, for different adhesives, the effect of ultrasonic vibration on the bonding performance was different, which was worth paying attention to when bonding. Furthermore, to better illustrate the effect of ultrasonic vibration, the fracture morphology of adhesive bonded joints and the percentage of various failure modes were discussed. This work provides a reference for the bonding technology with ultrasonic vibration, and deserves further study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Surface modification of aircraft used composites for adhesive bonding10.1016/j.ijadhadh.2014.01.004 ↗
2. Experimental study on fatigue resistance of composite joints with protruding-head bolts10.1016/S0263-8223(01)00127-1 ↗
3. Adhesion phenomena in bonded joints10.1016/j.ijadhadh.2012.04.007 ↗
4. Adhesive bonding of carbon fibre/epoxy laminates: correlation between surface and mechanical properties10.1016/j.surfcoat.2012.07.085 ↗
5. Sensitivity of double cantilever beam test to surface contamination and surface pretreatment10.1016/j.ijadhadh.2013.06.002 ↗
6. Pre-bonding technology based on excimer laser surface treatment10.1016/S0169-4332(99)00384-0 ↗
7. On the fabrication and automation of reliable bonded composite repairs10.1080/00218464.2014.896211 ↗
8. End milling of Carbon Fiber Reinforced Plastics as surface pretreatment for adhesive bonding-effect of intralaminar damages and particle residues
9. The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints10.1016/j.compositesb.2016.05.039 ↗
10. Analysis of adhesively bonded CFRE composite scarf joints modified with MWCNTs10.1016/j.compositesa.2015.01.004 ↗
11. Experimental analysis on the single-lap joints bonded by a nanocomposite adhesives which obtained by adding nanostructures10.1016/j.compositesb.2016.11.046 ↗
12. Research on strength of nanocomposite adhesively bonded composite joints10.1016/j.compositesb.2017.06.016 ↗
13. Experimental investigation on the enhancement of Mode I fracture toughness of adhesive bonded joints by electrospun nanofibers10.1080/00218464.2017.1402301 ↗
14. Development and fracture toughness characterization of a nylon nanomat epoxy adhesive reinforcement
15. Characterization of aluminum alloy-epoxy bonded joints with nanofibers obtained by electrospinning
16. Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy10.1016/j.msea.2004.03.073 ↗
17. Investigation in the interface adhesion strength between SU-8 photoresist and metal substrate by ultrasonic treatment10.1007/s00542-015-2632-2 ↗
18. Ultrasonic curing of one-part epoxy system10.1177/0021998311401075 ↗
19. The use of power ultrasound energy to support interface formation for structural adhesive bonding10.1016/j.ijadhadh.2009.10.002 ↗
20. How acoustic cavitation can improve adhesion10.1016/j.ultras.2012.02.013 ↗
21. Enhancing the adhesion strength of micro electroforming layer by ultrasonic agitation method and the application10.1016/j.ultsonch.2016.04.021 ↗
22. Ultrasonic vibration-strengthened adhesive bonding of CFRP-to-aluminum joints10.1016/j.jmatprotec.2018.03.003 ↗
23. Enhancing mechanical properties of adhesive laminates joints using ultrasonic vibration-assisted preprocessing10.1016/j.compstruct.2019.111325 ↗
24. Experimental investigation of mode I interlaminar fracture toughness in T300/914 composite
25. Processing resin matrix composites using high intensity ultrasound
26. Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods10.1016/j.compstruct.2005.01.023 ↗
27. The influence of surface treatment on the tensile properties of carbon fiber-reinforced epoxy composites-bonded joints10.1016/j.compositesb.2018.12.095 ↗