journal article·2016-07

Experimental and numerical investigation of balanced Boron/Epoxy single lap joints subjected to salt spray aging

G.C. Papanicolaou, P. Charitidis, D.E. Mouzakis, E. Karachalios, G. Jiga, D.V. Portan

Publisher page

Abstract

Abstract The present study concerns with the experimental and analytical investigation of balanced Boron/Epoxy single lap joints subjected to tensile loading, after being exposed to an aggressive environment (salt spray chamber) in order to study the effect of a controlled corrosive environment on their strength and failure. FM94, a high strength adhesive produced by Cytec, was used for bonding. Four different overlap lengths (13, 20, 30 and 40 mm) have been tested and an extensive experimental analysis has been executed. A geometrically nonlinear, two-dimensional (2D) finite element analysis has been employed to determine the hydrostatic stress and the shear strain distribution across the two interfaces of the single-lap joints. Additionally, a numerical solution has been applied to determine the Von Mises stress distribution and a simulation for four different overlap lengths (13, 20, 30 and 40 mm) has been performed. The results mainly prove that the overlap length and the aging conditions directly affect the joint tensile strength, while an optimum value of the overlap length can be defined. A good agreement between finite element results and experimental findings was found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · High-Velocity Impact and Material Behavior · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Failure load evaluation and prediction of hybrid composite double lap joints10.1016/j.compstruct.2010.05.002 ↗
2. da Silva · 2011
3. Adams · 1997 · 359
4. Reinhart T. New adhesive needs and concepts for the aircraft and aerospace industries. SAE Technical Paper 720118; 1972; 〈doi:10.4271/720118〉.10.4271/720118 ↗
5. Fibre reinforced composites in aircraft construction10.1016/j.paerosci.2005.02.004 ↗
6. Daniel B Miracle and Steven L Donaldson. Air Force Research Laboratory; Introduction to Composites, 〈http://www.compositecarbonfiberprop.com/carbon_fiber.pdf〉.
7. Die Niektraftverteiling in Zugbeanspruchten mit Konstanten Laschenquerchritten
8. The stresses in cemented joints10.1115/1.4009336 ↗
9. Effect of Poisson׳s ratio strains in adherends on stresses of an idealized lap joint10.1243/03093247V082134 ↗
10. Hart-Smith LJ. Adhesive bonded single lap joints, NASA; 1973; CR-112236.
11. Peppiatt · 1974
12. Strength prediction of bonded single-lap joints by non-linear finite element methods10.1016/0143-7496(84)90103-9 ↗
13. Oplinger DW. A layered beam theory for single lap joints, U.S Army Materials Technology Laboratory Report MTL, TR 1991.
14. Effects of adherend deflections in single lap joints10.1016/0020-7683(94)90037-X ↗
15. Strength and failure modes of bonded single-lap joints between cross-ply adherends10.1016/0010-4361(93)90017-3 ↗
16. Static and fatigue behavior of adhesive joints in SMC–SMC composites10.1002/pc.10084 ↗
17. Non linear finite analysis of stress and strain distributions across the adhesive thickness in composite single lap joints10.1016/S0263-8223(99)00106-3 ↗
18. Failure mode and strength of uni-directional composite single-lap bonded joints with different bonding methods10.1016/j.compstruct.2005.01.023 ↗
19. Ashton · 1969
20. Adams · 2005
21. Moisture diffusion and hygrothermal aging in bismaleimide matrix carbon fibre composites – Part I: uni-weave composites10.1016/S0266-3538(02)00161-6 ↗
22. Environmental degradation of the interfacial fracture energy in adhesively bonded joint10.1016/S0013-7944(02)00004-8 ↗
23. Aluminium bond permanence
24. The effect of water on epoxide resins and joints
25. Long-term durability in water of aluminium alloy adhesive joints bonded with epoxy adhesives10.1016/S0143-7496(96)00038-3 ↗
26. Experimental and numerical investigation of the static response of environmentally aged adhesively bonded joints10.1016/j.ijadhadh.2012.08.007 ↗
27. Mixed-mode fatigue behavior of degraded toughened epoxy adhesive joints10.1016/j.ijadhadh.2010.11.007 ↗
28. MDC Report A0124 McDonnell Douglas Corporation. Weathering Properties of Boron/Epoxy Rudder. St. Louis, NO 15 July; 1970.
29. The effects of geometry and material properties on the fracture of single lap-shear joints10.1016/S0020-7683(02)00344-X ↗
30. The effects of overlap length and adherend thickness on the strength of adhesively bonded joints subjected to bending moment
31. The efficient design of adhesive bonded joints10.1080/00218467508075049 ↗
32. Fatigue behavior of composite adhesive lap joints10.1016/S0266-3538(02)00082-9 ↗
33. The effect of surface topography on the adhesion of elastic solids10.1088/0022-3727/10/18/010 ↗
34. The mechanics of contact and adhesion of periodically rough surfaces10.1002/polb.1094 ↗
35. Adhesion between an elastic body and a randomly rough hard surface10.1140/epje/i2002-10025-1 ↗
36. Adhesion between a thin elastic plate and a hard randomly rough substrate10.1103/PhysRevB.70.125407 ↗
37. The deformation and adhesion of randomly rough and patterned surfaces10.1021/jp0602880 ↗
38. Measurement of the deformation and adhesion of rough solids in contact10.1021/jp9904872 ↗
39. Contact mechanics for randomly rough surfaces10.1016/j.surfrep.2006.04.001 ↗
40. Adhesion on micro-structured surfaces10.1080/00218460701377529 ↗
41. Effects of adherend thickness and taper on adhesive bond strength measured by portable pull-off tests10.1016/j.ijadhadh.2013.03.014 ↗
42. Pizzi A. Mittal KL. Handbook of adhesive technology. 2nd edition, Revised and Expanded Copyright © 2003 by Marcel Dekker, Inc.10.1201/9780203912225 ↗
43. Davis · J Mater Sci · 1985 · 20 · 97510.1007/BF00585742 ↗
44. Brewis · Int J Adhes Adhes · 1982 · 2 · 21510.1016/0143-7496(82)90028-8 ↗
45. Shalash RJA. Ph.D. thesis, Leicester Polytechnic, U.K. 1980.
46. Plastic yielding of a film adhesive under multiaxial stresses10.1016/S0143-7496(99)00033-0 ↗
47. Prediction of deformation and failure of rubber toughened adhesive joints10.1016/j.ijadhadh.2003.08.002 ↗
48. A discussion of the molecular mechanisms of moisture transport in epoxy resins10.1002/(SICI)1099-0488(20000301)38:5<792::AID-POLB16>3.0.CO;2-H ↗
49. Water transportation in epoxy resin10.1021/cm048884z ↗
50. Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy10.1016/S0032-3861(98)00790-3 ↗
51. Experimental and numerical investigation of unbalanced boron/ epoxy-aluminum single lap joints subjected to a corrosive environment