journal article·2024-01Open access

Thermally reversible prototype adhesive via the furan–maleimide Diels–Alder reaction

Donya Ramimoghadam, David Szmalko, Jessirie Dilag, Raj Ladani, Adrian P. Mouritz, Stuart Bateman

Abstract

The development of structural epoxy adhesives with the capacity to bond and de-bond on-demand would open many opportunities for the assembly, inspection, repair, and end of life disposal of structural bonded assemblies. Herein, a reversible cross-linking mechanism enabling bonding and debonding of an epoxy adhesive based on Diels–Alder (DA) chemistry is investigated and demonstrated. The Diels–Alder incorporated multifunctional diamine cross-linker was initially synthesised, followed by forming a covalently cross-linked network with DGEBA epoxy at low temperature (80 °C) that breaks via cleavage of DA adducts at elevated temperature (150 °C). Upon cooling the covalent cross-links reform enabling the epoxy to retain adhesive properties, and the bonding/de-bonding effect was performed over two complete cycles advancing a thermally reversible adhesive based on the retro-DA mechanism. The viscoelastic properties of the prototype adhesive including viscosity, storage and loss modulus were retained after bonding and de-bonding cycles, affirming retro-DA reaction occurs at about 150 °C upon heating cycle and DA reaction upon cooling cycle. Mechanical testing demonstrates maximum of 39.5% reduction in bond strength in debonding cycle, followed by maximum of 100% bond strength in re-bonding cycle with no additional application of the prototype adhesive, revealing excellent adhesive performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Synthesis and properties of polymers · Photopolymerization techniques and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. A holistic approach for decision on selection of end-of-life products recovery options10.1016/j.jclepro.2013.10.001 ↗
2. Review on failure prediction techniques of composite single lap joint
3. Failure mechanism of bonded joints with similar and dissimilar material10.1016/j.compositesb.2018.11.016 ↗
4. Failure criteria for adhesively bonded joints10.1016/j.ijadhadh.2012.01.009 ↗
5. Failure analysis of adhesively bonded joints in composite materials10.1016/j.matdes.2011.07.031 ↗
6. B. K. Holland, "Blade shield removal and replacement," Patent Appl. US15/194,028, 2018..
7. Geometrically non-linear thermal stress analysis of an adhesively bonded tubular single lap joint10.1016/S0168-874X(02)00062-8 ↗
8. Chemical recycling of glass fiber reinforced epoxy resin cured with amine using nitric acid10.1016/j.polymer.2004.12.035 ↗
9. Solvolysis of bisphenol A diglycidyl ether/anhydride model networks10.1016/j.polymdegradstab.2005.05.021 ↗
10. Supercritical propanol, a possible route to composite carbon fibre recovery: a viability study10.1016/j.compositesa.2005.12.006 ↗
11. Decomposition of epoxy resin in supercritical isopropanol10.1021/ie901542z ↗
12. Chemical recycling of carbon fibre composites using alcohols under subcritical and supercritical conditions10.1016/j.supflu.2008.02.008 ↗
13. Degradation behaviour and recovery of bisphenol-A from epoxy resin and polycarbonate resin by liquid-phase chemical recycling10.1016/j.polymdegradstab.2005.01.015 ↗
14. M. J. Charlas, "Method for separation of a metallic element glued to an element made of a composite material," Patent Appl. US16/481,620, 2019..
15. Y. Wai Ren, "Effect of adhesive modification on the SLJ strength for disassembly purposes." [Online]. Available: https://hdl.handle.net/10356/78429.
16. State-of-the-art laser adhesion test (LASAT)10.1080/10589759.2011.573550 ↗
17. R. H. B. G. Brustad, "Using laser shock loads to debond structures," Patent Appl. US11/209,986, 2009..
18. Generation of controlled delaminations in composites using symmetrical laser shock configuration10.1016/j.compstruct.2017.03.039 ↗
19. Adhesive bond strength evaluation in composite materials by laser-generated high amplitude ultrasound
20. Corrosion: fundamentals, testing, and protection
21. Failures of structures and components by metal-induced embrittlement
22. Dismantlement studies of dismantlable polyurethane adhesive by controlling thermal property10.1080/01694243.2012.690213 ↗
23. Nishiyama · 2005 · 555
24. Dismantlement behavior and strength of dismantlable adhesive including thermally expansive particles10.1016/S0143-7496(03)00067-8 ↗
25. Effect of thermally expandable particle additives on the mechanical and reversibility performance of adhesive joints
26. Debonding on command of adhesive joints for the automotive industry10.1016/j.ijadhadh.2015.01.014 ↗
27. Review of debonding techniques in adhesively bonded composite structures for sustainability
28. Self-healing systems based on disulfide-thiol exchange reactions10.1039/c3py00087g ↗
29. Room-temperature self-healable and remoldable cross-linked polymer based on the dynamic exchange of disulfide bonds10.1021/cm4040616 ↗
30. Alkoxyamine with reduced homolysis temperature and its application in repeated autonomous self-healing of stiff polymers10.1039/c3py00679d ↗
31. Room temperature self-healable epoxy elastomer with reversible alkoxyamines as crosslinkages10.1016/j.polymer.2014.06.064 ↗
32. Silica-like malleable materials from permanent organic networks10.1126/science.1212648 ↗
33. Mouldable liquid-crystalline elastomer actuators with exchangeable covalent bonds10.1038/nmat3812 ↗
34. Facile fabrication of fast recyclable and multiple self-healing epoxy materials through diels-alder adduct cross-linker10.1002/pola.27655 ↗
35. The diels-alder reaction with maleic anhydride
36. A thermally remendable epoxy resin10.1039/b811938d ↗
37. Synthesis and characterization of epoxy with improved thermal remendability based on Diels-Alder reaction10.1002/pi.2872 ↗
38. Diels-Alder based, thermo-reversible cross-linked epoxies for use in self-healing composites10.1016/j.polymer.2015.10.031 ↗
39. A thermally remendable multiwalled carbon nanotube/epoxy composites via Diels-Alder bonding10.1007/s10965-019-1804-7 ↗
40. Self-healing polymers based on thermally reversible Diels-Alder chemistry10.1039/c2py20957h ↗
41. Thermally reversible and self-healing novolac epoxy resins based on Diels-Alder chemistry10.1002/app.42167 ↗
42. Synthesis of a diamine cross-linker containing Diels-Alder adducts to produce self-healing thermosetting epoxy polymer from a widely used epoxy monomer10.1039/C2PY20611K ↗
43. Crosslinked epoxy materials exhibiting thermal remendablility and removability from multifunctional maleimide and furan compounds10.1002/pola.21184 ↗
44. A thermally re-mendable cross-linked polymeric material10.1126/science.1065879 ↗
45. Discrete macromolecular constructs via the diels–alder “click” reaction10.1002/pola.24835 ↗
46. Note: thermally removable epoxy adhesives incorporating thermally reversible diels-alder adducts10.1080/00218460309540 ↗
47. Re-useable thermally reversible crosslinked adhesives from robust polyester and poly(ester urethane) Diels-Alder networks10.1039/D0GC02938F ↗
48. Characterisation of the thermal self-healing of a high crosslink density epoxy thermoset10.1039/C5NJ00066A ↗
49. Effect of substituents in aromatic amines on the activation energy of Epoxy−Amine reaction10.1021/jp071001h ↗
50. Glycidyl ether reactions with amines10.1021/ie50553a029 ↗
51. Kinetics of curing reaction of epoxide catalyzed by tertiary amine10.1002/app.1993.070500618 ↗
52. Control of reactions and network structures of epoxy thermosets10.1016/j.progpolymsci.2016.06.003 ↗
53. Influence of the structure on thermoset cure kinetics10.1002/pola.1993.080310810 ↗
54. Toughening of a trifunctional epoxy system. II. Thermal characterization of epoxy/amine cure10.1002/(SICI)1097-4628(19960620)60:12<2251::AID-APP24>3.0.CO;2-8 ↗
55. Quantitative analysis of the cure reaction of DGEBA/DDS epoxy resins without and with thermoplastic polysulfone modifier using near infra-red spectroscopy10.1016/0032-3861(93)90046-D ↗
56. FT-NIR spectroscopy: trends and application to the kinetic study of epoxy/triamine system (comparison with DSC and SEC results)10.1016/S0968-4328(96)00022-4 ↗
57. Curing effects on interfacial adhesion between recycled carbon fiber and epoxy resin heated by microwave irradiation10.3390/ma11040493 ↗
58. Self-healable polysiloxane/graphene nanocomposite and its application in pressure sensor10.1007/s10853-018-03233-6 ↗
59. Kinetic model of a Diels–Alder reaction in a molten state: thermal and viscoelastic behaviour10.1007/s00289-019-02805-z ↗