Assessing the effects of shear, compression, and peel on the cathodic degradation of elastomer-to-metal adhesive bonds
Source abstract
Abstract
Abstract For cathodically polarized elastomer-to-metal adhesive bonds, two modes of bond degradation are known to occur: weakening and delamination. Weakening is the degradation caused solely by the high pH environment created by hydroxyl ion (OH−) generation at cathodic sites. Weakening manifests itself as an environmental crack at the primer/metal interface detectable only if the bond is pulled destructively apart. Delamination occurs if peel stress of sufficient magnitude acts on a weakened bond to cause the rubber to separate from the metal. To quantify the effects of compression and shear on the rate of bond weakening, the authors used custom-developed specimens called the compression specimen and the shear specimen, respectively. These were simple elastomer–metal specimens bonded with a commercially available, two-coat (primer and adhesive) system. A number of these specimens were conditioned under a variety of cathodic conditions, including some that were highly accelerated. Static compressive stress was found to decelerate bond weakening in specimens placed in highly alkaline (pH 14) environments. The experimental evidence revealed no significant effect (neither accelerating nor decelerating) of shear stress on bond weakening rate. Tests to evaluate the effect of peel stress on the delamination mode of bond degradation were also performed. To this end, a large number of custom, self-loading specimens called the strip blister specimen, were tested in cathodic environments according to a test matrix that included five levels of cathodic current density and four temperatures in two electrolytes. The rate of bond delamination was found to be sensitive to cathodic voltage, temperature, as well as the electrolyte. Blending the control primer with γ-aminopropyltriethoxysilane was found to significantly retard the rate of bond delamination. Similarly, passivation of the mild steel substrates by a zinc-phosphate coating treatment was found to considerably slow delamination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Leidheiser · Ind Eng Chem Prod Res Dev · 1981 · 20 · 54710.1021/i300003a024 ↗
2. Leidheiser · J Adhes Sci Technol · 1987 · 1 · 7910.1163/156856187X00094 ↗
3. Hammond · Corrosion Sci · 1981 · 21 · 23910.1016/0010-938X(81)90033-0 ↗
4. Koehler · Corrosion · 1984 · 40 · 510.5006/1.3579295 ↗
5. Stevenson · Int J Adhes Adhes · 1985 · 5 · 8110.1016/0143-7496(85)90020-X ↗
6. Stevenson · J Adhesion · 1987 · 21 · 31310.1080/00218468708074978 ↗
7. Hamadeh · J Adhes Sci Technol · 1988 · 2 · 7710.1163/156856188X00093 ↗
8. Hamade · J Adhes Sci Technol · 2003 · 17 · 123510.1163/156856103322114561 ↗
9. Glowe DE, Arnett SL. The application of mechanical clamps on the portsmouth connector. NRL Memorandum 4602, Naval Research Laboratory, Washington DC, November 1981.
10. Chang · J Adhes · 1989 · 27 · 19710.1080/00218468908048453 ↗
11. Napolitano · J Adhes Sci Technol · 1988 · 2 · 31110.1163/156856188X00291 ↗
12. Dannenberg · J Appl Polym Sci · 1961 · 5 · 12510.1002/app.1961.070051401 ↗
13. Williams · J Appl Polym Sci · 1969 · 13 · 2910.1002/app.1969.070130105 ↗
14. Dillard DA, Lai YH, Chang YS, Corson T, Bao Y. Alternate bister geometries for measuring the fracture toughness of adhesive bonds. Proceedings of the 1990 SEM Conference on Experimental Mechanics, Albuquerque, NM, June 1990.
15. O’Brien · J Adhes · 2003 · 79 · 6910.1080/00218460309560 ↗
16. Mostovoy S, Rippling EJ. Final Report, Contract No. N00019-74-c-0274, Mater. Lab., Glenwood, IL (1975).
17. Practice for fracture strength in cleavage of adhesives in bonded joints. Test Method D-3433, Internatinal American Society of Testing and Materials, West Conshocken, PA, USA.
18. Dillard DA, Liechti KM, LeFebvre DR, Lin C, Thornton JS, Brinson HF. In: Adhesively Bonded Joints: Testing, Analysis, and Design. ASTM STP 981, 1988. p. 83–97.10.1520/STP30329S ↗
19. Lai · J Adhes Sci Technol · 1994 · 8 · 66310.1163/156856194X00410 ↗
20. Chen · J Adhes · 2001 · 75 · 40510.1080/00218460108029613 ↗
21. Liechti · Int J Fracture · 1989 · 39 · 21710.1007/BF00047451 ↗
22. Lefebvre · Expl Mech · 1988 · 28 · 3810.1007/BF02328994 ↗
23. Cutts · 1981 · 367
24. Rakestraw MD, Dillard DA, Vrana MA, Ward TC, Dillard JG, Berglund CA. ASME, Aerosapce Division (Publication) AD. Proceedings of the 1994 International Mechanical Engineering Congress and Exposition. vol. 43. Chicago, IL, USA, November 6–11, 1994. p. 65.
25. Parvatareddy · J Adhes Sci Technol · 1998 · 12 · 61510.1163/156856198X00821 ↗
26. Hamadeh · J Adhes Sci Technol · 1989 · 3 · 42110.1163/156856189X00317 ↗
27. Liechti · J Adhes · 1992 · 40 · 2710.1080/00218469208030469 ↗
28. Ripling · J Appl Polym Sci · 1971 · 15 · 64110.1002/app.1971.070150311 ↗
29. Boerio FJ. Adhesive Systems—surface preparation. Primers, and Adhesives, NRL Memorandum Report 5748, Work Unit IIA.3.a April 1986.
30. Dillard · Polym Mater Sci Eng · 1987 · 56 · 214
31. Plueddemann · Prog Organic Coatings · 1984 · 11 · 29710.1016/0033-0655(83)80012-0 ↗
32. Walker · 1992 · 21
33. Naviroj · J Adhes · 1985 · 18 · 9310.1080/00218468508079673 ↗
34. Peng SJ. Nonlinear multiaxial finite deformation investigation of solid propellant. AFRPL-TR-84-036, 1984.
35. Ondrus · J Adhes · 1989 · 29 · 2710.1080/00218468908026475 ↗
36. Horner · 1992 · 241
37. Kallury · Anal Chem · 1988 · 60 · 16910.1021/ac00153a014 ↗
38. Kranias · J Phys Chem B · 1997 · 101 · 1025410.1021/jp971996b ↗
39. Theidman · J Adhes · 1987 · 22 · 19710.1080/00218468708071243 ↗
40. Fedrizzi · Prog Organic Coatings · 2001 · 42 · 6510.1016/S0300-9440(01)00153-9 ↗