journal article·2018-04

A viscoelastic-viscoplastic model to describe creep and strain rate effects on the mechanical behaviour of adhesively-bonded assemblies

A. Ilioni, C. Badulescu, N. Carrere, P. Davies, D. Thévenet

Publisher page

Abstract

Abstract Most of the adhesives used in the marine industry are polymers with a mechanical behaviour which is strongly influenced by the strain rate. Therefore, it is important to predict with accuracy their viscous behaviour. To describe their mechanical behaviour in a bonded joint, a viscoelastic-viscoplastic constitutive law is proposed here. The viscous effects on the elastic behaviour are described using a spectral distribution, which divides the viscous strain as the sum of the strains of several viscous mechanisms, each of them with a different characteristic time and weight. The viscoplastic component of the model permits a better description of the strong non-linear behaviour of the adhesives. The parameters of the constitutive law are obtained using an inverse identification procedure coupled with a finite element model. Two creep tests, in two loading directions, are needed in order to identify the viscoelastic part. The viscoplastic part is identified using monotonic tests. In order to validate the behaviour law and the identification procedure, the adhesive HuntsmanTMAraldite 420 A/B has been investigated and modelled. All the experimental tests have been conducted using the modified Arcan device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Ultrasonics and Acoustic Wave Propagation · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Progressive damage and failure of mechanically fastened joints in CFRP laminates – part i: refined finite element modelling of single-fastener joints10.1016/j.compstruct.2011.07.023 ↗
2. Ochsner · 2011
3. Experimental and numerical investigation of balanced boron/epoxy single lap joints subjected to salt spray aging10.1016/j.ijadhadh.2016.01.009 ↗
4. Analysis of the nonlinear behaviour of adhesives in bonded assemblies—comparison of TAST and arcan tests10.1016/j.ijadhadh.2008.04.006 ↗
5. Development of an improved adhesive test method for composite assembly design10.1016/j.compscitech.2004.09.008 ↗
6. da Silva · 2008
7. Experimental and computational investigations on strain rate sensitivity and deformation behaviour of bulk materials made of epoxy resin structural adhesive10.1016/j.ijsolstr.2009.09.026 ↗
8. Material modelling for rate-dependent adhesives10.1016/S0143-7496(00)00051-8 ↗
9. An assessment of the impact performance of bonded joints for use in high energy absorbing structures10.1243/PIME_PROC_1985_199_102_02 ↗
10. Manufacture of adhesive joints and bulk specimens with high-temperature adhesives10.1016/S0143-7496(03)00101-5 ↗
11. Characterization and modelling of the viscous behaviour of adhesives using the modified arcan device10.1080/01694243.2014.991483 ↗
12. Modelling and predicting the effects of test speed on the strength of joints made with FM73 adhesive10.1016/0143-7496(95)93639-3 ↗
13. A modified creep model of epoxy adhesive at ambient temperature10.1016/j.ijadhadh.2008.07.010 ↗
14. Modeling nonlinear viscoelasticity in polymers for design using finite element analysis10.1002/pen.21993 ↗
15. Simulation of strength difference in elasto-plasticity for adhesive materials10.1002/nme.1315 ↗
16. Implementation, identification and validation of an elastoplastic-damage model for the finite element simulation of structural bonded joints10.1016/j.ijadhadh.2014.01.020 ↗
17. Unified constitutive model for thermoset adhesive, FM7310.1016/0143-7496(95)91623-E ↗
18. Nonlinear analysis of adhesively bonded lap joints considering viscoplasticity in adhesives10.1016/S0045-7949(98)00168-0 ↗
19. Numerical modelling of lap joints bonded with a ratedependent adhesive10.1016/j.ijadhadh.2003.11.006 ↗
20. Analysis of the low temperature-dependent behaviour of a ductile adhesive under monotonic tensile/compression–shear loads10.1016/j.ijadhadh.2012.03.009 ↗
21. A modified arcan test to analyze the behaviour of composites and their assemblies under out-of-plane loadings10.1016/j.compositesa.2010.10.012 ↗
22. Numerical analysis of edge effects in adhesively-bonded assemblies application to the determination of the adhesive behaviour10.1016/j.compstruc.2008.02.003 ↗
23. A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models10.1016/j.compositesa.2006.01.018 ↗
24. Characterization and modelling of the 3d elastic–plastic behaviour of an adhesively bonded joint under monotonic tension/compression-shear loads: influence of three cure cycles10.1080/01694243.2012.701528 ↗
25. Analysis of the influence of hydrostatic stress on the behaviour of an adhesive in a bonded assembly10.1163/016942410X507696 ↗
26. Micromechanical-based hybrid mesoscopic 3d approach for non-linear progressive failure analysis of composite structures10.1177/0021998312450179 ↗