Characterization of the effect of an epoxy adhesive in hybrid FSW-bonding aluminium-steel joints for naval application
Source abstract
Abstract
Abstract This study focused on the characterization of an epoxy resin-based adhesive used in the hybrid friction stir welding-adhesive bonding (FSW-AB) technology which involves the use of polymeric adhesives to join aluminium and steel elements giving significant advantages as well as uniform distribution of bond-joint stress, protection from corrosion, and reduced noise and vibration. Thermo-analytical techniques such as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were applied to study the curing rate of the structural epoxy adhesive. Infrared (IR) spectroscopy was used to examine the material before and after cure, scanning electron microscopy (SEM) to perform for the morphological analysis and microcalorimetry to evaluate the fire resistance properties. The mechanical performance of metal joints bonded by epoxy resin were studied as well. The joint strength was determined by utilizing single-lap shear test. The experimental results showed that single lap joints (SLJs) in the presence of the epoxy adhesive increased shear strength compared to SLJs of neat metals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Mechanical Behavior of Composites · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Weldbonding - a hybrid method of assembly10.1016/S0026-0576(13)70163-6 ↗
2. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
3. Akinlabi · 2014
4. Joining of dissimilar materials10.1016/j.cirp.2015.05.006 ↗
5. Techniques for joining dissimilar materials: metals and polymers
6. Joining of polymers and polymer–metal hybrid structures: recent developments and trends10.1002/pen.21424 ↗
7. Development of hybrid friction stir welding and adhesive bonding single lap joints in aluminium alloys
8. Hybrid FSWeld-bonded joint fatigue behaviour
9. Fatigue behaviour of aluminium lap joints produced by laser beam and friction stir welding10.1016/j.proeng.2014.06.265 ↗
10. Dissimilar friction stir lap welding of AA 5754-H22/AA 6082-T6 aluminium alloys: influence of material properties and tool geometry on weld strength10.1016/j.matdes.2015.08.066 ↗
11. Cognard · 2005
12. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment10.1023/B:JMSC.0000007726.58758.e4 ↗
13. Aluminium friction stir weldbonding10.1016/j.proeng.2015.08.062 ↗
14. Experimental analysis and comparison of the strength of simple and hybrid structural joints10.1016/j.ijadhadh.2010.01.005 ↗
15. Lap shear strength and fatigue behavior of friction stir spot welded dissimilar magnesium-to-Aluminium joints with adhesive10.1016/j.msea.2012.11.039 ↗
16. Refill friction stir spot welding of 7075-T6 aluminium alloy single-lap joints with polymer sealant interlayer10.1016/j.compstruct.2018.06.070 ↗
17. Experimental investigation of the mechanical behaviour of spot welding–adhesives joints10.1016/j.compstruct.2015.08.036 ↗
18. Temperature distribution study during the friction stir welding process of Al2024-T3 Aluminium alloy10.1007/s12613-013-0796-2 ↗
19. High performance epoxy nanocomposite adhesive: effect of nanofillers on adhesive strength, curing and degradation kinetics10.1016/j.ijadhadh.2018.03.013 ↗
20. Ebnesajjad · 2008
21. Aluminium friction-stir weld-bonded joints10.1080/00218464.2015.1085860 ↗
22. Friction stir weld-bonding defect inspection using phased array ultrasonic testing10.1007/s00170-017-0770-7 ↗
23. 2010
24. Stuart · 2005