Effect of saline environment on mechanical properties of adhesive joints
Source abstract
Abstract
Abstract Literature reports very few works about the effect of corrosive environments on the mechanical properties of adhesive joints. Therefore, the present study intends to contribute for a better understanding of the effect of saline solution on the mechanical properties of single-lap adhesive joints. The specimens were manufactured using Docol 1000 high strength steel plates with 1 mm of thickness and Araldite ® 420 A/B epoxy adhesive. The static shear strength of the joints was influenced by the exposure time in saline solutions only up to 120 h, and remained, after this period, nearly constant. In terms of fatigue strength, for 10 5 cycles, a decrease about 25% and 39% occurred in specimens immersed during 120 h in deionised water and saline solution, respectively, comparatively to the control samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Adams · 2005
2. Petrie · 2000
3. Adhesively bonded joints in composite materials: an overview10.1243/14644207JMDA219 ↗
4. Effects of temperature and loading rate on the mechanical properties of a high temperature epoxy adhesive10.1163/016942411X580144 ↗
5. Characteristics of plasma surface treated composite adhesive joints at high environmental temperature10.1016/S0263-8223(02)00060-0 ↗
6. Joint strength predictions for adhesive joints to be used over a wide temperature range10.1016/j.ijadhadh.2006.09.007 ↗
7. Durability of adhesively-bonded single lap–shear joints in accelerated hygrothermal exposure for automotive applications10.1016/j.ijadhadh.2013.02.009 ↗
8. Diffusion of moisture in adhesively bonded joints10.1080/00218460108030731 ↗
9. Durability of bonded aluminum structure
10. The durability of some epoxide adhesive-bonded joints on exposure to moist warm air10.1016/0143-7496(80)90032-9 ↗
11. Environmental failure of structural adhesive joints10.1080/00218467408075035 ↗
12. Fatigue behaviour of composite adhesive lap joints10.1016/S0266-3538(02)00082-9 ↗
13. Effect of the surface preparation on PP reinforced glass fibre adhesive lap joints strength10.1177/0892705711408161 ↗
14. The effect of environment on the fatigue of bonded composite joints. Part 1: testing and fractography10.1016/S1359-835X(00)00131-7 ↗
15. Durability of aluminium adhesive joints bonded with a homopolymerised epoxy resin10.1080/00218460600998490 ↗
16. Adhesive bonding of aluminium with structural acrylic adhesives: durability in wet environments10.1163/156856106779116614 ↗
17. ASTM E 8M-09. Standard test methods for tension testing of metallic materials (metric). Annual Book of ASTM; 2009.
18. Effect of adherend's rigidity on the shear strength of single lap adhesive joints10.1016/j.ijadhadh.2010.12.003 ↗
19. Impact behaviour of panels for automotive applications10.1111/j.1475-1305.2010.00735.x ↗
20. Experimental analysis of the influence of hydrostatic stress on the behavior of an adhesive using a pressure vessel10.1080/00218464.2011.597318 ↗
21. Analysis of the influence of hydrostatic stress on the behaviour of an adhesive in a bonded assembly10.1163/016942410X507696 ↗
22. Simulation of mechanical behaviour of composite bonded joints containing strip defects10.1016/j.ijadhadh.2005.06.010 ↗
23. Araldite® 420 A/B. Aerospace, parts manufacturing and repair, selector guide. Edited by Hunstman Advanced Materials, Switzerland: GmbH; 2007.
24. ISO 4287. Geometrical product specifications (GPS) – surface texture. Profile method – terms, definitions and surface texture parameters; 1997.
25. ISO 4288. Geometrical product specifications (GPS) – surface texture. Profile method – rules and procedures for assessment of surface texture; 1996.
26. EN ISO 9227. Corrosion tests in artificial atmospheres – salt spray tests; 2006.
27. Experimental and numerical analysis of single-lap joints for the automotive industry10.1016/j.ijadhadh.2008.09.001 ↗
28. Analytical models of adhesively bonded joints – Part II: comparative study10.1016/j.ijadhadh.2008.06.007 ↗
29. Effect of certain hostile environments on adhesive joints10.1002/jctb.5010170301 ↗
30. The durability of adhesive joints in the presence of water10.1016/0143-7496(96)00001-2 ↗
31. Influence of superposition length on mechanical resistance of single-lap adhesive joints10.1016/j.compstruct.2004.01.018 ↗
32. Effect of water and mechanical stress on durability
33. Kinetics and Mechanism of Environmental Attack
34. The effect of temperature on the strength of adhesively-bonded composite-aluminium joints10.1080/00218469308026585 ↗
35. An experimental and analytical study of the mechanical behaviour of adhesively bonded joints for variable extension rates and temperatures10.1016/j.ijadhadh.2007.02.004 ↗
36. The effect of temperature on the strength of adhesive joints10.1016/0143-7496(92)90052-W ↗
37. Evaluation of cryogenic performance of adhesives using composite-aluminum double-lap joints10.1016/j.compstruct.2005.11.005 ↗
38. Mechanical characterization of flexible Adhesives10.1080/00218460902881808 ↗
39. Cyclic stress durability testing of lap shear joints exposed to hot-wet condition10.1016/S0143-7496(99)00012-3 ↗
40. The effects of ageing and environment on the fatigue life of adhesive joints10.1016/0143-7496(92)90028-T ↗
41. The effect of water on adhesives and adhesive joints
42. Adhesively-bonded repairs to fibre-composite materials 1: experimental10.1016/S1359-835X(98)00060-8 ↗
43. Adhesives and sealants for severe environments10.1016/0143-7496(87)90093-5 ↗
44. Study on the fatigue strength of AA 6082-T6 adhesive lap joints10.1016/j.ijadhadh.2009.02.009 ↗