Examining the effect of graphene nanoplatelets on the corrosion resistance of epoxy coatings
Source abstract
Abstract
Abstract Graphene due to its two-dimensional structure, large surface area and high impermeability is regarded as an excellent potential filler for the development of anti-corrosive coatings by creating a natural barrier to the diffusion of electrolytes. Epoxy polymers are widely used as protective coatings, and in the present study, commercially-available graphene nanoplatelets (GNPs) were dispersed into an epoxy resin using three-roll milling (3RM). The GNP-modified epoxy was coated onto mild steel substrates, and cured. The coated panels were immersed into a corrosive environment of 3.5 wt% NaCl aqueous solution for 4–5 days. The adhesion of the coatings to the substrate was then measured using a cross-cut test. The addition of higher loadings of GNPs resulted in a deteriorating corrosion performance, with the 1.5 wt% and 3 wt% coatings exhibiting 53% and 91% damage by area, respectively, after the cross-cut tests. The unmodified epoxy and low GNP content coatings (≤0.5 wt%) demonstrated 0% damage. This shows that the corrosion behaviour of GNP/epoxy coatings is not dominated by barrier effects but by electrochemical factors. The addition of GNPs is only effective at low loadings, as higher contents result in electrically-conductive coatings that facilitate the conduction of corrosion currents.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Graphene research and applications · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Anticorrosion performance of epoxy coatings on steel surface exposed to deionised water10.1108/03699420310464793 ↗
2. Ellis · 1993
3. Effect of nano clay on corrosion protection of zinc-rich epoxy coatings on steel 3710.1016/j.jmst.2016.08.017 ↗
4. Highly effective anti-corrosion epoxy spray coatings containing self-assembled clay in smectic order10.1039/C4TA06221C ↗
5. Vapor barrier properties of polycaprolactone montmorillonite nanocomposite: effect of clay dispersion10.1016/S0032-3861(03)00108-3 ↗
6. Preparation of epoxy–clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating10.1016/j.porgcoat.2007.07.011 ↗
7. Mechanical properties of graphene and graphene-based nanocomposites10.1016/j.pmatsci.2017.07.004 ↗
8. Graphene: corrosion-inhibiting coating10.1021/nn203507y ↗
9. Achieving high performance corrosion and wear resistant epoxy coatings via incorporation of noncovalent functionalized graphene10.1016/j.carbon.2016.12.044 ↗
10. Electrochemical and anticorrosion behavior of functionalized graphite nanoplatelets epoxy coating10.1016/j.jiec.2014.01.011 ↗
11. Anticorrosive and electromagnetic shielding response of a graphene/TiO2–epoxy nanocomposite with enhanced mechanical properties10.1039/C6RA15273B ↗
12. Comparative tribological and corrosion resistance properties of epoxy composite coatings reinforced with functionalized fullerene C60 and graphene10.1016/j.surfcoat.2015.12.056 ↗
13. Corrosion resistance of graphene-reinforced waterborne epoxy coatings10.1016/j.jmst.2015.12.017 ↗
14. Room-temperature cured hydrophobic epoxy/graphene composites as corrosion inhibitor for cold-rolled steel10.1016/j.carbon.2013.08.052 ↗
15. Graphene Supermarket
16. Q-Lab Corporation · 2015
17. 2012
18. 2015
19. Soluble polythiophenes as anticorrosive additives for marine epoxy paints10.1002/maco.201307132 ↗
20. 2013
21. Preparation and characterization of graphite nano-platelet (GNP)/epoxy nano-composite: mechanical, electrical and thermal properties10.1016/j.eurpolymj.2013.10.008 ↗
22. A facile way to produce epoxy nanocomposites having excellent thermal conductivity with low contents of reduced graphene oxide10.1007/s10853-017-0969-x ↗
23. Graphene-based flame retardants: a review10.1007/s10853-016-0124-0 ↗
24. Dielectric properties of reduced graphene oxide/polypropylene nanocomposites with ultralow percolation threshold10.1016/j.polymer.2013.02.012 ↗
25. Mechanical, electrical and thermal properties of in-situ exfoliated graphene/epoxy nanocomposites10.1016/j.compositesa.2017.01.007 ↗
26. Assessment of graphene oxide/epoxy nanocomposite as corrosion resistance coating on carbon steel10.1179/1743278214Y.0000000232 ↗
27. Cao · 2016
28. Suloff · 2002
29. Validated numerical modelling of galvanic corrosion for couples: magnesium alloy (AE44)–mild steel and AE44–aluminium alloy (AA6063) in brine solution10.1016/j.corsci.2010.06.031 ↗
30. Miller · 1975
31. Multiwall carbon nanotubes-reinforced epoxy hybrid coatings with high electrical conductivity and corrosion resistance prepared via electrostatic spraying10.1016/j.porgcoat.2015.10.006 ↗
32. Thermo-mechanical and anti-corrosive properties of MWCNT/epoxy nanocomposite fabricated by innovative dispersion technique10.1016/j.compositesb.2017.01.046 ↗
33. Graphene as a long-term metal oxidation barrier: worse than nothing10.1021/nn4014356 ↗
34. Aligning multilayer graphene flakes with an external electric field to improve multifunctional properties of epoxy nanocomposites10.1016/j.carbon.2015.07.026 ↗
35. Kopsidas · 2019