Silane pretreatment of electrogalvanized steels: Effect on adhesive properties
Source abstract
Abstract
Abstract The aim of this study was to evaluate the use of γ-methacriloxypropyltrimethoxysilane (MPS) to promote the adhesion of electrogalvanized steel sheets and threaded joints when an anaerobic adhesive is selected. The influence of the pH of the silane solution on the coupling agent properties of MPS coatings was evaluated preparing two silane aqueous solutions at 1% volume of silane and two different values of pH (4 and 6). Those coatings were characterized in terms of infrared spectroscopy (FTIR), scanning electronic microscopy (SEM), contact angle and surface energy. The influence of pretreatment conditions on the adhesive performance of steels was then evaluated both by shear tests from single lap adhesive joints and screw–nut bonds. Results show that the use of coatings hydrolyzed at pH 4 exhibit better adhesion behavior than those hydrolyzed at pH 6. The shear strength of anaerobic adhesive joints dramatically increases, showing a cohesive failure. This is related to the hydrolysis and condensation rates of silane solution and the stability of the metallic surface in contact with silane solution at the studied pH values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints10.1016/j.jmatprotec.2009.11.006 ↗
2. The improvement of adhesive properties of PEEK through different pre-treatments10.1016/j.apsusc.2012.04.040 ↗
3. A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications10.1016/j.apsusc.2012.08.091 ↗
4. Atmospheric pressure plasma oxidation of AA6061-T6 aluminum alloy surface for strong and durable adhesive bonding applications10.1016/j.apsusc.2013.05.064 ↗
5. Corrosion protection properties of organofunctional silanes. An overview10.1016/S1007-0214(05)70134-6 ↗
6. Hydrolysis process of γ-APS and characterization of silane film formed on copper in different conditions10.1016/j.apsusc.2013.09.018 ↗
7. Plueddemann · 1991
8. Optimisation of wet chemical silane deposition to improve the interfacial strength of stainless steel/epoxy10.1016/j.apsusc.2014.10.075 ↗
9. The effect of 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane bland and tris(3-trimethoxysylylpropil)isocianurate on the shear bond strength of composite resin to titanium metal10.1016/j.dental.2003.10.009 ↗
10. Mechanical properties of polyester films painted after silanization of 6063 aluminium alloy with different pretreatment conditions10.1016/j.porgcoat.2010.11.008 ↗
11. Influence of thermal curing on the fabrication and properties of thin organosilane films coated on low carbon steel substrates10.1016/j.jmatprotec.2006.12.042 ↗
12. Improving the shear strength by silane treatments of aluminum for direct joining of phenolic resin10.1016/j.jmatprotec.2012.07.008 ↗
13. Influence of silane surface modification of veneer on interfacial adhesion of wood–plastic plywood10.1016/j.apsusc.2013.10.098 ↗
14. The toxicology of chromium with respect to its chemical speciation. A review10.1002/jat.2550130314 ↗
15. Chromium-induced genotoxicity and apoptosis: relationship to chromium carcinogenesis. Review
16. Enhanced corrosion resistance of AA2024-T3 and hot-dip galvanized steel using a mixture of bis-[triethoxysilylpropyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine10.1016/j.electacta.2003.10.023 ↗
17. Structure and corrosion resistance of a composite gamma-amino propyl triethoxy silane and gamma-glycidoxy propyl trimethoxy silane conversion coating on galvanized steel10.1016/S1006-706X(13)60019-9 ↗
18. Characterization of hot-dip galvanized (HDG) steel treated with bis-1,2-(triethoxysilyl)ethane and γ-aminopropyltriethoxysilane10.1163/15685610152542342 ↗
19. Structural and mechanical characterization of methacryloxypropyltrimethoxysilane (MPS) on Zn-electrocoated steel10.1163/016942410X507632 ↗
20. The influence of pH on the hydrolysis process of γ-methacryloxypropyltrimethoxysilane analyzed by FT-IR and the silanization of electrogalvanized steel10.1163/016942409X12586283821559 ↗
21. Analysis of hydrolysis of methacryloxypropyltrimethoxysilane and its influence on the formation of silane coatings on 6063 aluminum alloy10.1016/j.apsusc.2009.02.022 ↗
22. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
23. Surface photografting of unsaturated alkoxysilane onto polyolefins with excimer-UV lamps
24. Linking mechanical properties of silanes to their chemical structure: an analytical study of γ-GPS solutions and films10.1016/S0300-9440(01)00135-7 ↗
25. The influence of organosilane condition on films formed on aluminium characterised using RAIR and XPS10.1163/156856107781362608 ↗
26. Effect of pH on the corrosion products and corrosion rate of zinc in oxygenated aqueous solutions
27. The protective nature of passivation films on zinc: wetting and surface energy10.1016/j.corsci.2004.01.001 ↗
28. Charaterization of hot-dip galvanized (HDG) steel treated with γ-UPS, VS and tetrasulfide10.1163/156856101300189907 ↗
29. Characterization of organofunctional silane films on zinc substrates10.1006/jcis.1996.4604 ↗
30. Kinetics of the hydrolysis and condensation of organofunctional alkoxysilanes: a review10.1163/156856192X00106 ↗
31. Factors influencing the durability of epoxy adhesion to silane pretreated aluminium10.1016/j.ijadhadh.2005.03.005 ↗
32. Understanding the relationship between silane application conditions, bond durability and locus of failure10.1016/j.ijadhadh.2005.03.009 ↗
33. Vapor-phase silanation of plasma-polymerized silica-like films by gamma-aminopropyltriethoxysilane10.1080/00218460590921977 ↗
34. The effects of surface pretreatment on the cyclic-fatigue characteristics of bonded aluminium-alloy joints10.1016/j.ijadhadh.2004.12.004 ↗