Flexural capacity of continuous reinforced concrete beams strengthened or repaired by CFRP/GFRP sheets
Source abstract
Abstract
Abstract The flexural strengthening of reinforced concrete (RC) beams by bonding external composite materials has proved to be an effective and convenient technique. Several works, focus on mechanical behaviour of continuous reinforced concrete beam with two spans strengthened by composite materials, were reported in literature. This paper presents the flexural capacity of continuous RC beams with three spans strengthened or repaired by bonding carbon or glass fibre reinforced polymer (CFRP or GFRP) sheets. Experimental program consists of eight continuous RC beams strengthened by CFRP or GFRP sheets and one beam of reference. The dimension is the same for all beams with a length 9 m and a section 15x25 (cm). Experimental tests with monotonic loading were carried out by varying damaged level of the beams, composite material type and strengthening thickness. Five failure modes of strengthening beams were observed. The results show that the ultimate bending moment of the beam can be improved between 14.8 and 26.6% in case of the beams by bonding CFRP sheets and between 7.2 and 11.8% by bonding GFRP sheets. The beam, which was pre-damaged under pre-loading level 100% of the failure load, can be repaired as strengthened continuous RC beam. The optimal strengthening thickness in the positive and negative bending moment region was obtained. The variation of the strain in the positive and negative bending moment was analysed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Experimental performance of RC hollow columns confined with CFRP10.1061/(ASCE)1090-0268(2007)11:1(42) ↗
2. Experimental and numerical analysis of RC two-way slabs strengthened with NSM CFRP rods10.1016/j.conbuildmat.2007.07.027 ↗
3. Shear capacity of FRP-strengthened RC beams: FRP debonding10.1016/S0950-0618(02)00091-0 ↗
4. Failure mode analyses of reinforced concrete beams strengthened in flexure with externally bonded fibre-reinforced polymers10.1061/(ASCE)1090-0268(2004)8:2(123) ↗
5. Flexural behavior of reinforced concrete beams externally strengthened with CFRP sheets bonded with an inorganic matrix10.1016/j.engstruct.2005.09.011 ↗
6. Experiments and analytical comparison of RC beams strengthened with CFRP composites10.1016/S1359-8368(03)00090-8 ↗
7. Flexural ductility of reinforced HSC beams strengthened with CFRP sheets10.12989/sem.2008.30.4.403 ↗
8. Strengthening reinforced concrete beams using fibre reinforced polymer (FRP) laminates
9. RC beams strengthened with GFRP plates. I: experimental study10.1061/(ASCE)0733-9445(1991)117:11(3417) ↗
10. RC beams strengthened with FRP plates. II: analysis and parametric study10.1061/(ASCE)0733-9445(1991)117:11(3434) ↗
11. Design recommendations for the strengthening of reinforced concrete beams with externally bonded composite plates10.1016/j.compstruct.2007.12.001 ↗
12. Strength and ductility of RC beams repaired with bonded CFRP laminates10.1061/(ASCE)1084-0702(2001)6:5(349) ↗
13. Newamian · 2002 · 1
14. Flexural strengthening of RC continuous beams using CFRP laminates10.1016/j.cemconcomp.2003.07.002 ↗
15. Moment redistribution in continuous reinforced concrete beams strengthened with carbon fibre reinforced polymer laminates10.1007/s11029-007-0043-x ↗
16. Moment redistribution and ductility of RHSC continuous beams strengthened with CFRP
17. Experimental and analytical investigation of reinforced high strength concrete continuous beams strengthened with fiber reinforced polymer10.1016/j.matdes.2009.09.041 ↗
18. Aci · 2008
19. Identification of the interfacial fracture mechanism in the FRP laminated substrates using a modified single lap shear test set-up10.1016/j.engfracmech.2014.12.001 ↗
20. Bond characterization of adhesively bonded joints made with the resin infusion (RI) process10.1016/j.ijadhadh.2014.10.001 ↗