Numerical study of impact behaviour of mixed adhesive single lap joints for the automotive industry
Source abstract
Abstract
Abstract The automotive industry is now extensively using multi-material structures to reduce vehicle weight. Joining these dissimilar materials effectively in a single structure demands the use of adhesive bonding, but the presence of stress concentrations leads to low mechanical performance. Mixed adhesive joints have been proposed as a solution for this issue, using two adhesives in the same joint, combining stiffness and flexibility on the same overlap, improving performance. This work focuses on the numerical modelling of the mechanical behaviour of these joints, using previously published experimental data for validation. The proposed models use cohesive laws with strain rate dependent data to simulate quasi-static and impact loads on several configurations of mixed adhesive joints, using four different adhesives. The models were able to predict the behaviour of most configurations under study, especially for the stiffer adhesives. The model was found to be less effective for modelling high ductility adhesives under impact.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Transportation Safety and Impact Analysis · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. da Silva · 2011
2. Design and ageing of adhesives for structural adhesive bonding–a review
3. Adhesives and adhesive joints under impact loadings: an overview
4. da Silva · 2012
5. Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives10.1016/j.ijadhadh.2006.04.002 ↗
6. Adams · 2005
7. Comparison of the mechanical behaviour between stiff and flexible adhesive joints for the automotive industry10.1080/00218464.2010.482440 ↗
8. Variable-adhesive bonded joints
9. Variable modulus adhesives: an approach to optimised joint performance10.1016/j.ijadhadh.2004.08.002 ↗
10. Joint strength optimization by the mixed-adhesive technique10.1016/j.ijadhadh.2008.09.009 ↗
11. Behaviour under impact of mixed adhesive joints for the automotive industry10.1590/1679-78252762 ↗
12. An assessment of the impact performance of bonded joints for use in high energy absorbing structures10.1243/PIME_PROC_1985_199_102_02 ↗
13. Three-dimensional finite element analysis of single-lap adhesive joints under impact loads10.1163/15685610260255233 ↗
14. Three-dimensional finite element analysis of single-lap adhesive joints subjected to impact bending moments10.1163/156856102320252831 ↗
15. Sawa T, Nagai T, Iwamoto T, Kuramoto H. A study on evaluation of impact strength of adhesive joints subjected to impact shear loadings. In: Proceedings of the ASME 2008 international mechanical engineering congress and exposition. American Society of Mechanical Engineers; 2008. p. 55–61.10.1115/IMECE2008-68464 ↗
16. Modeling of high strength steel joints bonded with toughened adhesive for vehicle crash simulations10.1016/j.ijadhadh.2012.06.007 ↗
17. Wada H, Kubo S, Murase K, Kennedy T. Dynamic tensile strength of PMMA/AL plate butt adhesive joints. ICF10, Honolulu (USA); 2001–2013.
18. The effect of damage nucleation on the toughness of an adhesive joint10.1080/00218460108029618 ↗
19. Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model10.1163/156856107781061477 ↗
20. An explicit FE-model of impact fracture in an adhesive joint10.1016/j.engfracmech.2006.10.016 ↗
21. Haufe A, Pietsch G, Graf T, Feucht M. Modelling of weld and adhesive connections in crashworthiness applications with LS-DYNA. In: Proceedings of the NAFEMS seminar “simulation of connections and joints in structures”. Wiesbaden, Germany; 2010.
22. Predictive modeling of damage and failure in adhesively bonded metallic joints using cohesive interface elements10.1016/j.ijadhadh.2013.12.001 ↗
23. Application of the design of experiments procedure to the behaviour of adhesively bonded joints with plastically deformable adherends to enable further understanding of strain rate sensitivity10.1016/j.ijadhadh.2013.03.003 ↗
24. Impact loading of single lap joints of dissimilar lightweight adherends bonded with a crash-resistant epoxy adhesive10.1115/1.4034204 ↗
25. Experimental determination of the tensile and shear behaviour of adhesives under impact loading10.1080/00218464.2015.1092387 ↗
26. ASTM D. 1002. Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal); 15; 200. p. 45–8.
27. ISO, 4587:2003. Adhesives – determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies. ISO; 2003.
28. Alternative methods to measure the adhesive shear displacement in the thick adherend shear test10.1163/156856108X292241 ↗
29. Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive10.1080/00218460902880313 ↗
30. Mode II fracture toughness of a brittle and a ductile adhesive as a function of the adhesive thickness10.1080/00218464.2010.506155 ↗
31. Dynamic behaviour of composite adhesive joints for the automotive industry10.1016/j.compstruct.2017.03.071 ↗
32. Effect of low temperature on tensile strength and mode I fracture energy of a room temperature vulcanizing silicone adhesive
33. Behaviour under impact of mixed adhesive joints for the automotive industry10.1590/1679-78252762 ↗
34. Influence of temperature and strain rate on cohesive properties of a structural epoxy adhesive10.1007/s10704-009-9337-4 ↗
35. Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive10.1016/j.compstruct.2016.05.034 ↗
36. The fracture behaviour of structural adhesives under high rates of testing10.1016/j.engfracmech.2009.07.013 ↗
37. A new cohesive element for structural bonding modelling under dynamic loading10.1016/j.ijimpeng.2012.02.003 ↗
38. Damage in single lap joints of woven fabric reinforced polymeric composites subjected to transverse impact loading10.1016/j.ijimpeng.2015.02.003 ↗
39. Rate dependent behavior of crash-optimized adhesives–experimental characterization, model development, and simulation10.1016/j.engfracmech.2014.11.006 ↗
40. A survey of computational models for adhesion10.1080/00218464.2014.1003210 ↗
41. da Silva · 2012
42. Comparison and evaluation of two types of cohesive zone models for the finite element analysis of fracture propagation in industrial bonded structures10.1016/j.engfracmech.2014.10.018 ↗