journal article·2019-01

Morphology, thermal and mechanical properties of epoxy adhesives containing well-dispersed graphene oxide

Gang Xue, Bin Zhang, Mingming Sun, Xugang Zhang, Jianhui Li, Lei Wang, Caiyu Song

Publisher page

Abstract

Abstract Graphene oxide (GO) is prepared and introduced into epoxy resins through a wet-transfer migration technique using a three-roll mill. The results of TEM, XRD and digital microscope observation show that good dispersion of GO is achieved without using any additives. The mechanical and thermal properties of GO/epoxy (GO/EP) adhesives are enhanced with GO incorporated. A 10.2% increase in Young's modulus and a 56.3% increase in elevated-temperature (120 °C) lap shear strength (LSS) was observed on addition of 1.0 wt% GO, compared to the neat epoxy adhesive. Increased glass transition temperature and improved thermal stability of the GO/EP adhesives are also observed in the DMA and TG analysis. Moreover, the toughness of the GO/EP adhesives is improved and much rougher fracture surface can be observed compared with the neat epoxy adhesive. No GO agglomeration can be observed in the SEM images of GO/EP adhesive with 1.0 wt% loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Graphene research and applications · Fiber-reinforced polymer composites · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Synthesis and application of epoxy resins: a review10.1016/j.jiec.2015.03.026 ↗
2. Silver nanoparticles/graphene oxide decorated carbon fiber synergistic reinforcement in epoxy-based composites10.1016/j.polymer.2017.10.049 ↗
3. Graphene and graphene oxide: synthesis, properties, and applications10.1002/adma.201001068 ↗
4. In situ polymerization of modified graphene/polyimide composite with improved mechanical and thermal properties10.1007/s10854-016-5560-8 ↗
5. Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties10.1016/j.carbon.2013.12.050 ↗
6. Mechanical properties of monolayer graphene oxide10.1021/nn101781v ↗
7. High strength measurement of monolayer graphene oxide10.1016/j.carbon.2014.09.082 ↗
8. The fabrication, properties, and uses of graphene/polymer composites10.1002/macp.201200029 ↗
9. Thermally conductive and electrically insulating epoxy nanocomposites with thermally reduced graphene oxide–silica hybrid nanosheets10.1039/c3nr01471a ↗
10. The role of functional groups on graphene oxide in epoxy nanocomposites10.1016/j.polymer.2013.08.026 ↗
11. Influence of graphene oxide with different oxidation levels on the properties of epoxy composites10.1016/j.compscitech.2018.04.007 ↗
12. Comparison of mechanical, electrical and thermal properties in graphene oxide and reduced graphene oxide filled epoxy nanocomposite adhesives10.1016/j.polymer.2018.03.005 ↗
13. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
14. Preparation and characterization of graphene oxide paper10.1038/nature06016 ↗
15. Simultaneous surface functionalization and reduction of graphene oxide with octadecylamine for electrically conductive polystyrene composites10.1016/j.carbon.2011.06.077 ↗
16. Impressive fatigue life and fracture toughness improvements in graphene oxide/epoxy composites10.1021/ma201563k ↗
17. Graphene/polymer nanocomposites10.1021/ma100572e ↗
18. An investigation of the mechanism of graphene toughening epoxy10.1016/j.carbon.2013.08.032 ↗
19. Single lap joints loaded in tension with ductile steel adherends10.1016/j.ijadhadh.2013.01.017 ↗
20. Single lap joints loaded in tension with high strength steel adherends10.1016/j.ijadhadh.2013.01.016 ↗
21. Aligned multi-walled carbon nanotubes (MWCNT) and vapor grown carbon fibers (VGCF) reinforced epoxy adhesive for thermal conductivity applications10.1007/s10854-017-7704-x ↗
22. Thermal conductivity and lap shear strength of GNP/epoxy nanocomposites adhesives10.1016/j.ijadhadh.2015.12.012 ↗
23. Ultrahigh thermal conductivity of assembled aligned multilayer graphene/epoxy composite10.1021/cm501473t ↗
24. Joint strength optimization by the mixed-adhesive technique10.1016/j.ijadhadh.2008.09.009 ↗