journal article·2018-08

Experimental study on tensile behaviour of steel plates with centre hole strengthened by CFRP plates under marine environment

Yi Wang, Yifeng Zheng, Junhui Li, Lide Zhang, Jun Deng

Publisher page

Abstract

Abstract Carbon fibre reinforced polymer (CFRP) is effective in strengthening steel structures with defects. However, when the composite structures are exposed to marine environment, their mechanical properties can be degraded to a degree that has not been thoroughly elucidated to date. In this paper, tensile behaviour of steel plates with a centre hole strengthened by CFRP plates under marine environment were experimentally studied. The marine environment was simulated by wetting/drying cycles (WDCs) with 3.5%wt sodium chloride solution. Different patch configurations and adhesive types were considered. After the environmental exposure, tensile tests were conducted. From the test results, load-displacement curves, load-strain curves, yield load, ultimate load and failure displacement change with 0, 90 and 180 WDCs were obtained. Based on particle image velocimetry (PIV), the failure modes of specimens were also analysed. After CFRP strengthening, the cracking propagation of steel plates was impeded, and the bearing capacity and ductility were significantly improved. The mechanical degradation degree was more than 20% after 180 WDCs exposure, while the strengthening effect reduction was even worse, which shows poor bond durability. Deterioration of adhesive not only has a negative effect on the mechanical performance of composite specimens but because of the stiffness reduction of the adhesive layer, a beneficial effect was also observed in the first 90 WDCs. This phenomenon plays an essential role in bond durability of the strengthening system, which warrants further investigation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Progress in the technique of upgrading metallic structures with advanced polymer composites10.1002/pse.112 ↗
2. State-of-the-art review on frp strengthened steel structures10.1016/j.engstruct.2006.10.006 ↗
3. Durability of steel/cfrp double strap joints exposed to sea water, cyclic temperature and humidity10.1016/j.compstruct.2012.01.004 ↗
4. A review on steel/cfrp strengthening systems focusing environmental performance10.1016/j.conbuildmat.2013.04.049 ↗
5. Concrete cover separation in frp-plated rc beams: mitigation using frp u-jackets10.1061/(ASCE)CC.1943-5614.0000721 ↗
6. Bond characteristics of cfrp/steel interface end-anchored with g-shaped clamps
7. Environmental durability of adhesively bonded frp/steel joints in civil engineering applications: state of the art10.1016/j.compositesb.2015.07.014 ↗
8. Study on thermal effects on fatigue behavior of cracked steel plates strengthened by cfrp sheets10.1016/j.tws.2014.04.015 ↗
9. Effects of moisture on the long-term performance of adhesively bonded frp/steel joints used in bridges10.1016/j.compositesb.2016.02.021 ↗
10. Influence of freeze–thaw cycling on the bond strength of steel–frp lap joints10.1016/j.compositesb.2013.12.024 ↗
11. Durability performances of carbon fiber–reinforced polymer and concrete-bonded systems under moisture conditions10.1061/(ASCE)CC.1943-5614.0000674 ↗
12. Apicella · 1985 · 69
13. Corrosion behavior of carbon fiber reinforced polymer anode in simulated impressed current cathodic protection system with 3% nacl solution10.1016/j.conbuildmat.2016.02.141 ↗
14. Galvanic corrosion of carbon and steel in aggressive environments10.1061/(ASCE)1090-0268(2001)5:3(200) ↗
15. Fatigue performance of metallic beam strengthened with a bonded cfrp plate10.1016/j.compstruct.2005.09.003 ↗
16. Crack propagation prediction of cfrp retrofitted steel plates with different degrees of damage using bem10.1016/j.tws.2014.04.006 ↗
17. Theoretical and experimental study on notched steel beams strengthened with cfrp plate10.1016/j.compstruct.2015.10.024 ↗
18. GB50367-2006. Design code for strengthening concrete structures; 2006.
19. Durability Study of pultruded CFRP plates immersed in water and seawater under sustained bending: water uptake and effects on the mechanical properties10.1016/j.compositesb.2014.10.034 ↗
20. Effect of chloride on tensile and bending capacities of basalt frp mesh reinforced cementitious thin plates under indoor and marine environments
21. Soil deformation measurement using particle image velocimetry (piv) and photogrammetry10.1680/geot.2003.53.7.619 ↗
22. Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗