Hygrothermal ageing of adhesive joints with nanoreinforced adhesives and different surface treatments of carbon fibre/epoxy substrates
Source abstract
Abstract
Abstract The effect of water absorption on the strength of single lap adhesive joints subjected to accelerated hygrothermal ageing (55 °C, 95% relative humidity, 800 h) was analysed. Two different variables were studied: the surface treatment of the carbon fibre/epoxy laminates (peel ply, grit blasting and atmospheric pressure plasma) and the addition of carbon nanofillers (0.5 wt% nanofibres and 0.25 wt% nanotubes) to the epoxy adhesive. The joint strength and the failure mode of the joints were investigated. Furthermore, the amount of water absorbed by the adhesive was determined. Adhesive joints with peel ply-treated laminates exhibit an increase in their strength, which is attributed to a relaxation of stresses in the adhesive/laminate interface; with grit blasting, this property remains almost constant. Plasma treatment provides the worst ageing behaviour because this treatment results in a surface with a higher surface free energy, which is more susceptible to environmental attack. The nanoreinforcement of the adhesive has a beneficial effect: it decreases the amount of absorbed water.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Tribology and Wear Analysis · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Environmental effects on the ageing of epoxy adhesive joints10.1016/j.ijadhadh.2008.02.001 ↗
2. Characterization of toughened bonded interface against fracture and impact loads10.1016/j.ijadhadh.2005.01.007 ↗
3. Modification of epoxy resin using reactive liquid (ATBN rubber)10.1016/S0014-3057(01)00194-X ↗
4. Effects of silane functionalization on the properties of carbon nanotube/epoxy nanocomposites, Compos10.1016/j.compscitech.2007.05.006 ↗
5. Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites10.1016/j.polymer.2006.01.029 ↗
6. Testing and evaluation on the thermal and mechanical properties of carbon nano fiber reinforced SC-15 epoxy10.1016/j.msea.2005.06.012 ↗
7. Curing effects of single-wall carbon nanotube reinforcement on mechanical properties of filled epoxy adhesives10.1016/j.compositesa.2010.02.002 ↗
8. Heimann M, Boehme B, Scheffer S, Wirts-Ruetters M, Wolter K-J. CNTs—a comparable study of CNT-filled adhesives with common materials. IEEE 59th electronic components and technology conference 1–4; 2009. 1871–1878.10.1109/ECTC.2009.5074275 ↗
9. Gibson T, Rice B, Ragland W, Silverman EM, Peng H, Strong KL, et al. Formulation and evaluation of carbon nanofiber-based conductive adhesives. Proceeding of 50th international SAMPE symposium; 2005.
10. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review10.1016/j.compositesa.2010.07.003 ↗
11. The reinforcement role of different amino-functionalized multi-walled carbon nanotubes in epoxy nanocomposites10.1016/j.compscitech.2007.04.025 ↗
12. Thermo-physical properties of epoxy nanocomposites reinforced by carbon nanotubes and vapor grown carbon fibers10.1016/j.tca.2006.01.016 ↗
13. Nanocomposites based on vapor-grown carbon nanofibers and an epoxy: functionalization, preparation and characterization10.1016/j.eurpolymj.2010.04.025 ↗
14. Fiber waviness in nanotube-reinforced polymer composites—I: modulus predictions using effective nanotube properties10.1016/S0266-3538(03)00069-1 ↗
15. Mechanical model to evaluate the effect of the dispersion in nanocomposites10.1016/j.actamat.2007.01.007 ↗
16. FTIR study of ageing epoxy resin reinforced by reactive graphitic nanofibers10.1002/app.26925 ↗
17. Wedge test of carbon-nanotube-reinforced epoxy adhesive joints10.1002/app.29294 ↗
18. A peel-type durability test coupon to assess interfaces in bonded, co-bonded, and co-cured composite structures10.1016/S0143-7496(98)00033-5 ↗
19. Treatment of composite surfaces for adhesive bonding10.1016/0143-7496(93)90036-9 ↗
20. Surface characterization and adhesive bonding of toughened bismaleimide composites10.1016/1359-835X(95)00064-9 ↗
21. Nanoreinforced epoxy adhesives for aerospace industry10.1080/00218460902881766 ↗
22. Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesion10.1016/j.ijadhadh.2003.09.006 ↗
23. Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints10.1016/j.ijadhadh.2010.02.007 ↗
24. 〈http://www.grupoantolin.com〉.
25. 〈http://www.nanocyl.com/en/Products-Solutions/Products/Research-Grades/Thin-Multi-Wall-Carbon-Nanotubes/Nanocyl-3150-series〉.
26. Effects of dispersion techniques of carbon nanofibers on the thermo-physical properties of epoxy nanocomposites10.1016/j.compscitech.2008.05.015 ↗
27. Water uptake of epoxy composites reinforced with carbon nanofillers10.1016/j.compositesa.2012.07.014 ↗
28. Rheological behaviour of nanoreinforced epoxy adhesives of low electrical resistivity for joining carbon fiber/epoxy laminates10.1163/016942409X12584625925060 ↗
29. Crank · 1994
30. Dielectric studies of adhesively bonded CFRP/epoxy/CFRP structures—design for ageing10.1016/S0266-3538(99)00111-6 ↗
31. Temperature effect during humid ageing of interfaces of glass and carbon fibers reinforced epoxy composites10.1016/j.jcis.2005.12.023 ↗
32. A fractographic analysis of delamination within multidirectional carbon/epoxy laminates10.1016/0266-3538(95)00099-2 ↗
33. Fractographic observations on delamination growth and the subsequent migration through the laminate10.1016/j.compscitech.2009.01.034 ↗
34. Surface pretreatments for composite joints: study of surface profile by SEM image analysis10.1163/016942410X507623 ↗
35. Kinloch · 1990
36. The durability of adhesive joints in the presence of water10.1016/0143-7496(96)00001-2 ↗
37. On the influence of polymer surface layer thickness on the adhesion of composite assembly. Differences between initial state and thermal ageing10.1002/masy.200750448 ↗
38. Fleming GJ, Rose T. Graphite composites for ocean ordinances. US Department of Commerce, National Technical Information Service, Report AD-770-407; 1973.
39. Effect of water sorption on the structure and mechanical properties of an epoxy resin system10.1002/1097-4628(20010404)80:1<71::AID-APP1077>3.0.CO;2-H ↗
40. Effect of water absorption on the mechanical and dielectric properties of nano-alumina filled epoxy nanocomposites10.1016/j.compositesa.2007.07.006 ↗
41. Epoxy-water interactions10.1002/pen.760200417 ↗
42. Evaluation of structural changes in epoxy systems by moisture sorption-desorption and dynamic mechanical studies10.1002/pc.750030304 ↗
43. Effect of cure temperature on the structure and water absorption of epoxy/amine thermosets10.1002/(SICI)1097-0126(199604)39:4<275::AID-PI508>3.0.CO;2-I ↗
44. Modeling the barrier properties of polymer-layered silicate nanocomposites10.1021/ma010780b ↗