The effect of titanium surface treatment on the interfacial strength of titanium – Thermoplastic composite joints
Source abstract
Abstract
Co-consolidated titanium – carbon fibre reinforced thermoplastic composite hybrid joints show potential for application in aerospace structures. The strength of the interface between the titanium and the thermoplastic composite is crucial for the strength of the entire hybrid joint. Application of a surface treatment on the titanium is an effective way to improve this interfacial strength. This paper evaluates the effect of several titanium surface treatments on the interfacial strength between titanium and carbon fibre reinforced polyetheretherketone (PEEK) or polyetherketoneketone (PEKK). Furthermore, the underlying bonding mechanisms, activated by these surface treatments, are studied. The research result shows that the grit blasted titanium – carbon fibre reinforced PEKK interface outperforms the other interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Kinloch · 1987
2. Process induced effects in thin-film bonding of PEKEKK in metal-polymer joints10.1002/pc.10681 ↗
3. Thermoplastic bonding to metals via injection molding for macro-composite manufacture10.1002/pen.10253 ↗
4. The evolution of residual stresses in thermoplastic bonding to metals10.1016/S0143-7496(97)00030-4 ↗
5. Adhesion of thermoplastic elastomer on surface treated aluminum by injection molding10.1002/pen.20801 ↗
6. Review adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment10.1023/B:JMSC.0000007726.58758.e4 ↗
7. Surface treatment of titanium for adhesive bonding to polymer composites: a review10.1016/S0143-7496(00)00044-0 ↗
8. Review of surface pretreatments for titanium alloys10.1016/0143-7496(95)91627-I ↗
9. Chawla · 2012
10. Kim · 1998
11. Flinn · 2006
12. Interfacial toughness measurements for thin films on substrates10.1016/S1359-6454(01)00354-8 ↗
13. A microscopic theory of brittle fracture in deformable solids: a relation between ideal work to fracture and plastic work10.1016/0001-6160(80)90048-6 ↗
14. Thermodynamic work of adhesion and peel adhesion energy of dimethoxysilyl-terminated polypropylene oxide/epoxy resin system jointed with polymeric substrates10.1002/app.1290 ↗
15. Ebnesajjad · 2014
16. The effects of grit-blasting on surface properties for adhesion10.1016/S0143-7496(98)00061-X ↗
17. Minford · 1993
18. The stability of different titanium-PEEK interfaces against water10.1016/j.mspro.2013.02.012 ↗
19. Atmospheric pressure plasma surface modification of titanium for high temperature adhesive bonding10.1016/j.ijadhadh.2011.05.009 ↗
20. Ultra-high-strength micro-mechanical interlocking by injection molding into laser-structured surfaces10.1016/j.ijadhadh.2010.03.008 ↗
21. Surface properties and adhesion in bonding aluminium alloys by adhesives10.1016/0143-7496(82)90064-1 ↗
22. Development of new surface pretreatments, based on alkaline hydrogen peroxide solutions, for adhesive bonding fo titanium10.1016/0143-7496(82)90066-5 ↗
23. Silicon sputtering as a surface treatment to titanium alloy for bonding with PEKEKK10.1016/S0143-7496(98)00042-6 ↗
24. Plasma spray coating as treatments for aluminum, titanium and steel adherends10.1002/(SICI)1096-9918(199705)25:5<366::AID-SIA245>3.0.CO;2-S ↗
25. Olrik L. The use of keronite surface treatment technology in the automotive industry. In: Proceedings of the international conference on green surfacing technology; 2006.
26. Adhesion tensile testing of environmentally exposed Ti-6Al-4V adherends10.1080/00218468708075398 ↗
27. Surface preparation of Ti-6Al-4V for high-temperature adhesive bonding10.1080/00218468908026479 ↗
28. Adhesion of crystalline polyphenyletheretherketone (PEEK) in metal-to-metal joints10.1016/0143-7496(92)90005-G ↗
29. Rider A. The durability of epoxy adhesive bonds formed with titanium alloy: DSTO platforms sciences laboratory 506 Larimer St Fishermans bend. Victoria 3207, Australia; 2002.
30. Rosato · 2004
31. Characterisation of metal–thermoplastic composite hybrid joints by means of a mandrel peel test10.1016/j.compositesb.2016.03.055 ↗
32. Critical assessment of the mandrel peel test for fiber reinforced thermoplastic laminates10.1016/j.engfracmech.2012.07.005 ↗
33. The development of a mandrel peel test for the measurement of adhesive fracture toughness of epoxy–metal Laminates10.1080/00218460490279215 ↗
34. ISO 8080. Aerospace – anodic treatment of titanium and titanium alloys – sulfuric acid process; 1985.
35. Pure commercial titanium color anodizing and corrosion resistance10.1007/s11665-011-9860-0 ↗
36. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
37. Cherry · 1981
38. Metal polyimide interface: a titanium reaction mechanism10.1116/1.573450 ↗
39. Photoemission spectroscopy study of aluminum–polyimide interface10.1116/1.572786 ↗
40. Luo · 2007
41. Salamone JC. Concise polymeric materials encyclopedia; 1998.