Effect of adhesive characteristics on static strength of adhesive-bonded aluminum alloys
Source abstract
Abstract
Abstract The use of adhesive is posed to increase dramatically for application to the next generation of vehicle structures as is the use of aluminum. In this study, the effect of adhesive characteristics on the strength of adhesive-bonded lap shear aluminum was investigated. It was found that the joint strength depended on not only the adhesive properties but the bond adhesion between the adhesive and adherend. For the given selected aluminum substrates, to ensure the cohesive failure mode and consistent joint strength it is necessary to select an adhesive which had a weaker than or comparable strength to the bond adhesion. To improve the failure mode from adhesive to cohesive, atmospheric pressure plasma surface treatment of X610-T4PD and X626-T4P aluminum was performed and results showed that it improved not only the joint strength but degree of cohesive failure mode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Surface Modification and Superhydrophobicity · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Joining techniques for aluminum space frames used in automobiles Part II-adhesive bonding and mechanical fasteners10.1016/S0924-0136(99)00361-1 ↗
2. Adams · 2005
3. Evaluation of different lap-shear joint geometries for automotive applications10.1016/j.ijadhadh.2006.09.016 ↗
4. Nonlinear finite element analysis of stress and strain distributions across the adhesive thickness in composite single-lap joints10.1016/S0263-8223(99)00106-3 ↗
5. The effects of geometry and material properties on the fracture of single lap-shear joints10.1016/S0020-7683(02)00344-X ↗
6. Strength and interface failure mechanism of adhesive joints10.1016/j.ijadhadh.2011.12.004 ↗
7. Single lap joints loaded in tension with high strength steel adherends10.1016/j.ijadhadh.2013.01.016 ↗
8. Single lap joints loaded in tension with ductile steel adherends10.1016/j.ijadhadh.2013.01.017 ↗
9. Experimental and numerical analysis of Clinch (Hemflange) joints used in the automotive industry10.1163/156856109X452729 ↗
10. Dry ice blasting as pretreatment of aluminum surfaces to improve the adhesive strength of aluminum bonding joints10.1016/S0143-7496(02)00083-0 ↗
11. Effect of surface pre-treatment on the adhesive strength of epoxy-aluminum joints10.1016/j.ijadhadh.2008.01.001 ↗
12. Strategies for the replacement of chromic acid anodizing for the structural bonding of aluminum alloys10.1016/j.ijadhadh.2005.07.001 ↗
13. A comparison of chromate–phosphate and chromate-free conversion coatings for adhesive bonding10.1080/00218469708010523 ↗
14. Adhesive strength of powder coated aluminum substrates10.1016/j.ijadhadh.2005.01.005 ↗
15. Improvement of adhesive strength of Ti–Al plasma sprayed coating10.1016/j.surfcoat.2006.07.014 ↗
16. Influence of low-pressure plasma treatment on adhesive bonding between polybutylene terephthalat (PBT) and aluminum10.1016/j.ijadhadh.2004.06.003 ↗
17. Influence of plasma surface treatment on bond strength behavior of an adhesively bonded aluminum–epoxy system10.1016/j.ijadhadh.2010.07.004 ↗
18. Preparation and rheological studies on the solvent based acrylic pressure sensitive adhesives with different crosslinking density10.1016/j.ijadhadh.2011.07.004 ↗
19. Pressure sensitive adhesives based on vector SIS polymers I. Rheological model and adhesive design pathways10.1080/00218469608010500 ↗
20. The effect of adhesive modulus on the performance of SMC lap shear joints10.1163/156856193X00033 ↗
21. The selection of adhesive used to bond polyvinyl chloride/wood flour composites10.1080/01694243.2013.804790 ↗
22. ASTM D1002-2001. Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal), American Society for Testing Materials; 2001.
23. Comparative DSC kinetics of the reaction of DGEBA with aromatic diamines. I. Non-isothermal kinetic study of the reaction of DGEBA with m-phenylene diamine10.1016/S0032-3861(01)00160-4 ↗
24. Dependence of size and size distribution on reactivity of aluminum nanoparticles in reactions with oxygen and MoO310.1016/j.tca.2006.03.001 ↗
25. Additive and nonadditive surface tension components and the interpretation of contact angles10.1021/la00082a018 ↗
26. Young T. Philosophical Transactions of the Royal Society of London, vol. 95, 1805, p. 65–87, doi:10.1098/rstl.1805.0005.10.1098/rstl.1805.0005 ↗
27. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
28. Attractive forces at interfaces10.1021/ie50660a008 ↗
29. Adhesion phenomena in bonded joints10.1016/j.ijadhadh.2012.04.007 ↗
30. 1995
31. Effect of thermal exposure on the strength of adhesive-bonded low carbon steel10.1016/j.ijadhadh.2013.01.019 ↗
32. Failure analysis of the adhesive joint of microwave ferrite phase shifter10.1016/j.engfailanal.2013.06.003 ↗
33. Adhesion and surface modification10.1007/3-540-69220-7_3 ↗
34. Adhesion of polymers10.1016/j.progpolymsci.2009.04.007 ↗
35. Surface energy, surface topography and adhesion10.1016/S0143-7496(03)00068-X ↗
36. Moisture effects on adhesive joints
37. Water effects on the bond strength of concrete/concrete adhesive joints10.1016/j.conbuildmat.2005.06.015 ↗
38. Influence of plasma surface treatment on bond strength behavior of an adhesively bonded aluminum–epoxy system10.1016/j.ijadhadh.2010.07.004 ↗