Absorption and glass transition temperature of adhesives exposed to water and toluene
Source abstract
Abstract
Abstract If adhesives are to be used in practical applications, such as for aerospace or marine components, it is essential that their long-term behaviour when exposed to aggressive environments, natural or man-made, should be known. The objective of this paper is to determine the liquid absorption behaviour of epoxy adhesives under complete immersion in two solvents (water and toluene) at two different temperatures (room temperature and 60 °C) and the effect on their glass transition temperature (Tg). The specimens were periodically removed from their environment for weighing and Tg measurement, the latter by using a rapid method which was developed previously by the authors. The rate of weight gain of the specimen (sorption) and the equilibrium level were higher for the higher temperature immersion than for the low temperature. The equilibrium level reached for toluene was higher than that of water. The values of Tg were significantly influenced by the liquid uptake. Finally, heating to a temperature above the Tg of the adhesive, even in a very short time, was found to significantly influence the results of the liquid uptake.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Analysis of Composite Materials · Mechanical Behavior of Composites · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Lee · 1990
2. Effect of water environment on mode II delamination fatigue in interlayer-toughened CFRP10.1299/jsmea.42.421 ↗
3. Effect of water and mechanical stress on durability
4. Long-term behavior of partially cured epoxy prepreg systems under tensile loading10.1002/pc.20023 ↗
5. Diffusion in polymer-diluent systems10.1007/BFb0050514 ↗
6. Crank · 1975
7. Diffusion of water in adhesives
8. A model for the diffusion of moisture in adhesive joints. Part I: Equations governing diffusion10.1080/00218468908050590 ↗
9. Effect of water and mechanical stress on durability
10. Modeling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive10.1016/j.ijadhadh.2004.02.002 ↗
11. Diffusion and relaxation in glassy polymer powders. 2. Separation of diffusion and relaxation parameters10.1016/0032-3861(78)90269-0 ↗
12. Sorption modes of water in glassy epoxies10.1016/S0376-7388(00)85035-8 ↗
13. Epoxy–water interactions10.1002/pen.760200417 ↗
14. Evaluation of structural changes in epoxy systems by moisture sorption–desorption and dynamic mechanical studies10.1002/pc.750030304 ↗
15. The physical basis of moisture transport in a cured epoxy resin system10.1002/app.1985.070301120 ↗
16. Water sorption in tetrafunctional phenol novolac epoxy mixtures cured with a diamine10.1023/A:1010174910232 ↗
17. Influence of water on thermal transitions in natural polymers and synthetic polyamides
18. Complementary multiple hydrogen–bonding interactions increase the glass transition temperatures to PMMA copolymer mixtures10.1021/ma900640a ↗
19. Relation of swelling and Tg depression to the apparent free volume of a particle-filled, epoxy-based adhesive10.1002/app.11576 ↗
20. A rapid method of measuring the glass transition temperature using a novel dynamic mechanical analysis method
21. Thermal characterization
22. Effects of curing cycle and thermal history on the glass transition temperature of adhesives
23. Measurement of the mechanical properties of structural adhesives in tension and shear over a wide range of temperatures’10.1163/1568561053148449 ↗
24. The uptake of water vapour by an epoxide adhesive formed from the diglycidyl ether of bisphenol-A and di-(1-aminopropyl-3-ethoxy) ether10.1016/0032-3861(80)90050-6 ↗
25. Measurement of the diffusion coefficient
26. Sorption and desorption of toluene, m-xylene, p-cresol and water by natural rubber chips
27. Modelling cyclic moisture uptake in an epoxy adhesive10.1080/00218460902997224 ↗
28. The effect of thermal spiking on moisture absorption, mechanical and viscoelastic properties of carbon fibre reinforced epoxy laminates10.1016/j.compscitech.2005.01.009 ↗
29. Thermal-spike-enhanced moisture absorption by polymer-matrixcarbon-fibre composites10.1016/S0266-3538(96)00168-6 ↗
30. The effect of moisture on the physical and mechanical integrity of epoxies10.1007/BF00551743 ↗
31. Aspects of network formation in glassy thermosets10.1002/app.31681 ↗