Bond quality at the FRP–wood interface using wood-laminating adhesives
Source abstract
Abstract
Abstract Fibre-reinforced polymer (FRP)-strengthened glulam would be a more economically viable product if a single adhesive type could be utilised at all the bonded interfaces. This paper describes a test programme that examines the hygrothermal compliance of five commercial wood-laminating adhesives when bonding commercially viable FRP materials to wood. It was seen that the integrity of the bond depended not only on adhesive type but also on the FRP type under consideration. For one of the FRP types, moisture-cycled FRP–wood bonded specimens obtained high wood failure percentages and good shear strength results that compared well with non-moisture-cycled FRP–wood specimens, non-moisture-cycled wood–wood bonded specimens and solid control specimens taken from the same board. This encouraging result suggests an alternative to the expensive structural epoxy adhesives, which are generally accepted as the appropriate adhesive in FRP-strengthened glulam.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Natural Fiber Reinforced Composites · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Timber beams strengthened with GFRP bars: development and applications10.1061/(ASCE)1090-0268(2002)6:1(11) ↗
2. Alam P, Ansell M, Smedley D. Flexural properties of steel and FRP reinforced LVL composites. In: Proceedings of the eighth world conference timber engineering, Lahti, vol. III. 2004. p. 342–6.
3. Flexural and shear strengthening of timber beams using glass fibre reinforced polymer bars—an experimental investigation10.1139/l03-069 ↗
4. Dagher HJ, Kimball T, Abdel-Magid B, Shaler SM. Effect of FRP reinforcement on low-grade Eastern Hemlock Glulams. In: Proceedings of the national conference on wood transportation structures, Madison, WI, 1996.
5. Hernandez R, Davalos JF, Sonti SS, Kim Y, Moody RC. Strength and stiffness of reinforced yellow-poplar glued laminated beams, Res. Pap. FPL-RP-554. Madison, WI, 1997.
6. Belperio R, Grad IE. The performance of Glulam beams reinforced with carbon fibre. In: Proceedings of Pacific timber engineering, vol. 2, 1999. p. 99–106.
7. Composite reinforcement of timber in bending can
8. The improved performance of home-grown timber glulam beams using fibre reinforcement
9. Analysis of the strength and stiffness of timber beams reinforced with carbon fiber and glass fiber10.1590/S1516-14392003000200014 ↗
10. Flexural reinforcement of glulam timber beams and joints with carbon fiber-reinforced polymer rods10.1061/(ASCE)1090-0268(2005)9:4(337) ↗
11. Martin ZA, Stith JK, Tingley DA. Commercialisation of FRP reinforced glulam beam technology. In: Proceedings of the sixth world conference on timber engineering, Whistler, 2000.
12. Adams · 1997
13. Bond strength of FRP–wood interface10.1177/073168449401300905 ↗
14. Cause of high longitudinal shrinkage in wood
15. Mays · 1992
16. The performance of adhesive systems for structural timbers10.1016/S0143-7496(97)00010-9 ↗
17. Resin repairs to timber structures10.1016/S0143-7496(97)00060-2 ↗
18. Adhesive systems for structural connections in timber10.1016/S0143-7496(00)00049-X ↗
19. Vick CB. Hydroxymethylated resorcinol coupling agent for enhanced adhesion of epoxy and other thermosetting adhesives to wood. In: Proceedings of wood adhesives 1995. Proc. no. 7296. Forest Prod. Society, Madison, WI. p. 47–55.
20. More durable epoxy bonds to wood with hydroxymethylated resorcinol coupling agent
21. Factors affecting the bond between polymer composites and wood10.1177/0731684405044898 ↗
22. A shear test for structural adhesives used in the consolidation of old timber10.1007/s001070050486 ↗
23. Chui YH, Ni C. Stress distributions in glued wood lap joints subjected to an axial force. In: Proceedings of the fifth world conference on timber engineering. Lausanne, 1998.
24. Stress analysis of adhesively bonded lap joints10.1016/S0263-8223(00)00052-0 ↗
25. Theoretical and experimental analysis of the scarf joint bonded structure: influence of the adhesive thickness on micromechanical behavior10.1080/00218469908010485 ↗
26. Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures10.1163/156856101317035503 ↗
27. Stress analysis of adhesively bonded lap joints10.1243/03093247V093185 ↗
28. Fiber-reinforced wood composites
29. Adhesive bonding of pultruted fiber-reinforced plastic to wood
30. ASTM D-1101. Standard method of test for integrity of glue joints in structural laminated wood products for exterior use, 1980.
31. Fiber-reinforced composite and wood bonded interfaces: part 1. Durability and shear strength10.1520/CTR10544J ↗
32. Patrick G. The structural performance of FRP reinforced glued laminated beams made from Homegrown Sitka Spruce. Ph.D. thesis, Queen's University Belfast, Northern Ireland, 2004.
33. Evaluating wood/FRP adhesive bond durability through chemical kinetics
34. Bond durability characterization of preservative treated wood and e-glass/phenolic composite interfaces10.1016/S0266-3538(03)00013-7 ↗
35. Evaluation of wood adhesives for a glue-laminated softwood
36. 1999
37. The improved performance of home-grown timber glulam using fibre reinforcement
38. ISO 6238, Adhesives; Wood-to-wood adhesive bonds; Determination of shear strength by compressive loading, 2001.
39. EN 391, Glued laminated timber, Delamination test of glue lines, 2001.
40. Hutchinson AR. Surface pre-treatment-the key to durability. In: Proceedings of second international conference. on structural faults and repair, University of London, 1987.
41. Knife-versus abrasive-planed wood: quality of adhesive bonds
42. The use of flame ionisation technology to improve the wettability and adhesion properties of wood10.1016/S0143-7496(00)00040-3 ↗
43. New shear assay for the simultaneous determination of shear strength and shear modulus in solid wood: finite element modeling and experiemental results
44. Anisotropic plasticity and the notched wood shear block
45. A numerical study of the shear-strength-predicting capabilities of test specimens for wood–adhesive bonds10.1016/S0143-7496(03)00096-4 ↗
46. Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives10.1016/j.ijadhadh.2006.04.002 ↗
47. Joint strength predictions for adhesive joints to be used over a wide temperature range10.1016/j.ijadhadh.2006.09.007 ↗
48. Factors affecting the strength of block-shear specimen