Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes
Source abstract
Abstract
This work presents a two-dimensional numerical analysis to assess the influence of several geometric changes on the tensile residual strength of repaired CFRP composite plates. The model was validated by comparison with previously published experimental results. Single- and double-lap repair techniques were evaluated. The geometric changes include chamfering the patch outer face, thickening the adhesive near the overlap outer edge, filling the plates gap with adhesive (plug filling), using fillets of different shapes and dimensions at the patch ends, chamfering the outer and inner plate edges, and combinations of these changes. This work shows that, with the correct joint configuration, the residual strength can be increased by 27% for single-lap joints and 12% for double-lap joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Three-dimensional finite element analysis of double-lap composite adhesive bonded joint using submodeling approach10.1016/S1359-8368(99)00026-8 ↗
2. The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap joints10.1016/0263-8223(95)00059-3 ↗
3. Shape optimization of adhesive fillets10.1016/S0143-7496(99)00047-0 ↗
4. Strength prediction of patch repaired CFRP laminates loaded in compression10.1016/S0266-3538(00)00011-7 ↗
5. Modulus graded composite adherends for single-lap bonded joints10.1177/0021998302036014172 ↗
6. Modulus grading versus geometrical grading of composite adherends in single-lap bonded joints10.1016/S0263-8223(03)00097-7 ↗
7. An experimental and numerical study on adhesive joints for composites10.1016/j.compstruct.2003.09.052 ↗
8. Failure mode and strength of uni-directional composite single-lap bonded joints with different bonding methods10.1016/j.compstruct.2005.01.023 ↗
9. Understanding and control of adhesive crack propagation in bonded joints between carbon fibre composite adherends I experimental10.1016/S0143-7496(01)00020-3 ↗
10. Understanding and control of adhesive crack propagation in bonded joints between carbon fibre composite adherends, II: Finite element analysis10.1016/S0143-7496(01)00021-5 ↗
11. Fatigue behaviour and damage evolution of single-lap bonded joints in composite material10.1016/j.compscitech.2005.04.026 ↗
12. Prediction of compressive strength of carbon–epoxy laminates containing delamination by using a mixed-mode damage model10.1016/S0263-8223(00)00091-X ↗
13. Modelling single and double-lap repairs on composite materials10.1016/j.compscitech.2005.04.007 ↗
14. Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model10.1163/156856107781061477 ↗
15. Analysis of adhesive bonded joints: a unified approach10.1016/S0266-3538(02)00030-1 ↗
16. Manufacture of adhesive joints and bulk specimens with high-temperature adhesives10.1016/S0143-7496(03)00101-5 ↗
17. Influence of superposition length on mechanical resistance of single-lap adhesive joints10.1016/j.compstruct.2004.01.018 ↗
18. Simulation of mechanical behaviour of composite bonded joints containing strip defects10.1016/j.ijadhadh.2005.06.010 ↗
19. Bonded lap joints of composite laminates with tapered edges10.1016/j.ijsolstr.2005.07.035 ↗
20. Compressive behaviour of CFRP laminates repaired with adhesively bonded external patches10.1016/S0263-8223(99)00033-1 ↗
21. Campilho RDSG. Modelação da Execução de Reparações em Materiais Compósitos. M.Sc. thesis. Porto, Portugal: Department of Mechanical Engineering and Industrial Management, Enginnering Faculty; 2005.
22. Through-thickness shape optimisation of bonded repairs and lap-joints10.1016/S0143-7496(01)00029-X ↗
23. Non-linear analysis and optimization of adhesively bonded single-lap joints between fibre-reinforced plastics and metals10.1016/0143-7496(94)90039-6 ↗
24. Investigating the effect of spew and chamfer size on the stresses in metal/plastics adhesive joints10.1016/S0143-7496(02)00004-0 ↗
25. Stress analysis and failure properties of carbon-fibre-reinforced-plastic/steel double-lap joints10.1080/00218468608073238 ↗
26. Techniques to reduce peel stresses in adhesive joints with composites10.1016/j.ijadhadh.2006.04.001 ↗