journal article·2001-01

Two- and three-dimensional geometrical nonlinear finite elements for analysis of adhesive joints

Raul H. Andruet, David A. Dillard, Siegfried M. Holzer

Publisher page

Abstract

Abstract Special two- and three-dimensional adhesive elements have been developed for stress and displacement analyses in adhesively bonded joints. Both the 2-D and 3-D elements are used to model the whole adhesive system: adherends and adhesive layer. In the 2-D elements, adherends are represented by Bernoulli beam elements with axial deformation and the adhesive layer by plane stress or plane strain elements. The nodes of the plane stress–strain elements that lie in the adherend–adhesive interface are rigidly linked with the nodes of the beam elements, resulting in the offset nodes which coincide with the midplanes of the adherends. The 3-D elements consist of shell elements that represent the adherends and solid brick elements to model the adhesive. This technique results in smaller models with faster convergence than conventional 3-D finite element models. The resulting mesh can represent arbitrary beam- or plate-like geometries, which are a large part of adhesive joint designs. This model can include debonds as well as cracks within the adhesive, therefore it can be used for durability analysis of adhesive joints. Since large displacements are often observed in adhesively bonded joints, geometric nonlinearity is modeled. 2-D and 3-D stress analyses of single lap joints are presented. Important 3-D effects can be appreciated. A stress analysis of a crack patch geometry is presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Stress concentration factors for bonded lap joint10.2514/3.44305 ↗
2. The stresses in cemented joints10.1115/1.4009336 ↗
3. Viscoelastic analysis of adhesively bonded joints10.1016/0045-7949(87)90275-6 ↗
4. Two finite elements for modeling the adhesive in bonded configurations10.1080/00218468908048192 ↗
5. ‘A microcomputer program for stress analysis of adhesive-bonded joints10.1016/0143-7496(87)90023-6 ↗
6. Taylor MW. Special finite elements for modelling adhesively bonded joints in two- and three-dimensions. Thesis submitted in partial fulfillment of the Ms. of Science degree in the Engineering Mechanics Dept. of Virginia Polytechnic Institute and State University. Blacksburg, VA, 1996.
7. Thermal effects on adhesively bonded composite repair of cracked aluminum panels10.1016/S0167-8442(96)00028-6 ↗
8. Invariability of singular stress fields in adhesive bonded joints10.1007/BF00042432 ↗
9. Bathe · 1996
10. Reddy · 1993
11. ABAQUS. General-purpose finite element system. Hibbit, Karlson & Sorensen, Inc, 100 Medway Street, Providence, RI, 1997.
12. A method for the stress analysis of lap joints10.1080/00218469208030455 ↗
13. An evaluation of analytical and numerical solutions to the single-lap joint10.1016/0020-7683(94)90036-1 ↗
14. Baker · 1988