The analysis of kissing bonds in adhesive joints
Source abstract
Abstract
Abstract Kissing bonds pose a serious threat and an obstacle to the application of adhesive bonding in engineering structures. This paper describes an investigation of the formation of kissing bonds using various surface contaminants. Double-lap joints have been prepared using several contaminants, and tested in quasi-static tension. The values of shear strength obtained from these tests are successfully compared with observations of the interfaces and fracture surfaces. Finite element analysis in combination with cohesive elements was used to simulate the adhesive joint tests. Fracture properties used in the analysis were obtained from independent material tests. The results indicate very good agreement between experimental and predicted shear strengths for both control and contaminated joints. The results of the validated finite element model are explored to find a strain ‘signature’ that could be used to detect kissing bonds. The results indicate that measurement of local lateral strain may form the basis of a technique for monitoring or detection of kissing bonds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Fire effects on concrete materials · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Neutron imaging as a tool for the non-destructive evaluation of adhesive joints in aluminium10.1016/j.ijadhadh.2004.06.006 ↗
2. Recent advances in the use of infrared thermography10.1088/0957-0233/15/9/R01 ↗
3. The effect on adhesion stiffness due to bonded surface contamination
4. Observation in the structural response of adhesive bondline defects10.1016/S0143-7496(98)00029-3 ↗
5. Smith RA, Weise VL, Dalton RP. Kissing bond and environmental degradation detection using nonlinear ultrasonics, Qinetiq Ltd. 2002; 38.
6. Some studies on evaluation of degradation in composite adhesive joints using ultrasonic techniques10.1016/j.ultras.2013.01.014 ↗
7. The detectability of kissing bonds in adhesive joints using ultrasonic techniques10.1016/S0041-624X(03)00156-2 ↗
8. Van Den Abeele K, Delrue S, Haupert S and Aleshin V. Modeling nonlinear response from distributed damage and kissing bonds. In: Proceedings of the Meetings on Acoustics, vol. 16, Acoustical Society of America, 2012. pp. 1–36.10.1121/1.4764494 ↗
9. Acoustic nonlinearities in adhesive joints10.1016/S0041-624X(99)00083-9 ↗
10. Measurement of the ultrasonic nonlinearity of kissing bonds in adhesive joints10.1016/j.ndteint.2009.02.002 ↗
11. Modelling and measurement of the nonlinear behaviour of kissing bonds in adhesive joints10.1016/j.ndteint.2011.12.003 ↗
12. Adhesive bond testing of carbon-epoxy composites by laser shockwave10.1088/0022-3727/44/3/034012 ↗
13. Development of a laser shock adhesion test for the assessment of weak adhesive bonded CFRP structures10.1016/j.ijadhadh.2014.04.002 ↗
14. Characterising the behaviour of single lap joints using digital image correlation10.1016/j.ijadhadh.2012.08.010 ↗
15. Evaluation of kissing bond in composite adhesive lap joints using digital image correlation10.1016/j.ijadhadh.2013.01.004 ↗
16. Jeenjitkaew · 2011
17. Morphology and surface chemistry of kissing bonds in adhesive joints produced by surface contamination10.1016/j.ijadhadh.2010.06.005 ↗
18. ASTM D. 3528-96 Standard test method for strength properties of double lap shear adhesive joints by tension loading. Annual Book of ASTM Standards. American Society for Testing Material; 2002.
19. Marty PN, Desai N, and Andersson J. NDT of kissing bond in aeronautical structures. In: Proceedings of the 16th World Conference on NDT; 2004.
20. Sea and flight trials of optical fibre Bragg grating strain sensing systems10.1088/0964-1726/10/5/325 ↗
21. Raman spectroscopy study of HM carbon fibres: effect of plasma treatment on the interfacial properties of single fibre/epoxy composites10.1016/S0008-6223(01)00212-3 ↗
22. Edwards L, Fitzpatrick M, Irving P, Sinclair I, Zhang X, Yapp D. An integrated approach to the determination and consequences of residual stress on the fatigue performance of welded aircraft structures. In Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results into Design. ASTM International; 2007.10.1520/STP45330S ↗