A review of research advances in epoxy-based nanocomposites as adhesive materials
Source abstract
Abstract
Abstract In this paper, the research advances on epoxy-based nanocomposites as adhesive materials are reported. The research and development of nanocomposite as an adhesive material by incorporating various nano-fillers including carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nanoclay, nano-silica (nano-SiO2) and nano-alumina (nano-Al2O3) are reviewed. The effect of different nano-fillers on the mechanical properties and the joint strength of epoxy are reported. The current understanding of the principles and techniques for nano-fillers dispersion and the effects of nano-filler addition on the strength and durability of epoxy joints are also reviewed. The main findings are summarised and future research is recommended finally.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Adhesively bonded joints in composite materials: an overview
2. Effect of carbon nanotube reinforcement on fracture strength of composite adhesive joints10.1007/s10853-010-5225-6 ↗
3. Studies of epoxy resin systems: Part D: fracture toughness of an epoxy resin: a study of the effect of crosslinking and sub‐Tg aging10.1002/pen.760221809 ↗
4. Failure mechanisms in toughened epoxy resins—a review10.1016/0266-3538(88)90009-7 ↗
5. Fracture toughness of the nano-particle reinforced epoxy composite10.1016/j.compstruct.2008.03.005 ↗
6. Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies10.1016/0032-3861(83)90070-8 ↗
7. Morphology and toughness characterization of epoxy resins modified with amine and carboxyl terminated rubbers10.1016/0032-3861(82)90215-4 ↗
8. Chemical modification of matrix resin networks with engineering thermoplastics10.1007/BF00254652 ↗
9. Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum plates10.1016/j.matdes.2009.11.045 ↗
10. Toughening structural adhesives via nano-and micro-phase inclusions10.1080/00218460309551 ↗
11. The effect of nanoparticles on the adhesion of epoxy adhesive10.1016/j.matlet.2006.02.038 ↗
12. Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol–gel epoxy system10.1016/j.ijadhadh.2010.05.002 ↗
13. Effect of dispersion conditions on the thermo-mechanical and toughness properties of multi walled carbon nanotubes-reinforced epoxy10.1016/j.compositesb.2012.01.070 ↗
14. Effect of carbon nanotube enhanced adhesives on degradation of bonded joints in corrosive environments10.1179/1743289814Y.0000000085 ↗
15. The effect of strain-rate on the tensile and compressive behavior of graphene reinforced epoxy/nanocomposites10.1016/j.matdes.2014.03.020 ↗
16. Effect of reinforcements at different scales on mechanical properties of epoxy adhesives and adhesive joints: a review10.1080/00218464.2018.1452736 ↗
17. Moisture absorption–desorption effects in adhesive joints10.1016/j.ijadhadh.2009.05.001 ↗
18. Irreversible effects of hygrothermal aging on DGEBA/DDA epoxy resin10.1002/(SICI)1097-4628(19980711)69:2<363::AID-APP18>3.0.CO;2-X ↗
19. Effect of hygrothermal aging history on sorption process, swelling, and glass transition temperature in a particle‐filled epoxy‐based adhesive10.1002/app.10447 ↗
20. Effects of hygrothermal aging on epoxy-based anisotropic conductive film10.1016/j.matlet.2006.02.024 ↗
21. Effects of environmental exposure on adhesively bonded joints10.1016/0143-7496(91)90056-N ↗
22. Non-classical water diffusion in an industrial adhesive10.1016/j.ijadhadh.2010.07.008 ↗
23. Moisture sorption–desorption–resorption characteristics and its effect on the mechanical behavior of the epoxy system10.1016/j.polymer.2005.10.002 ↗
24. Thermomechanical and hygroelastic properties of an epoxy system under humid and cold-warm cycling conditions10.1016/j.polymdegradstab.2013.11.011 ↗
25. Water uptake of epoxy–clay nanocomposites: model development10.1016/j.compscitech.2007.05.030 ↗
26. Water uptake of epoxy composites reinforced with carbon nanofillers10.1016/j.compositesa.2012.07.014 ↗
27. Effect of water absorption on the mechanical and dielectric properties of nano-alumina filled epoxy nanocomposites10.1016/j.compositesa.2007.07.006 ↗
28. On nanocomposite toughness10.1016/j.compscitech.2007.06.027 ↗
29. Effect of carbon nanotubes on the strength of adhesive lap joints of C/C and C/C–SiC ceramic fibre composites10.1016/j.ijadhadh.2011.03.006 ↗
30. Effect of carbon nano-filler addition on the degradation of epoxy adhesive joints subjected to hygrothermal aging10.1016/j.polymdegradstab.2017.04.017 ↗
31. Load transfer in carbon nanotube epoxy composites10.1063/1.122911 ↗
32. A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites10.1016/j.jiec.2014.03.022 ↗
33. Polymer nanocomposites—a comparison between carbon nanotubes, graphene, and clay as nanofillers10.3390/ma9040262 ↗
34. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review10.1016/j.compositesa.2010.07.003 ↗
35. Single-walled carbon nanotube–polymer composites: strength and weakness10.1002/(SICI)1521-4095(200005)12:10<750::AID-ADMA750>3.0.CO;2-6 ↗
36. Mechanical and electrical properties of a MWNT/epoxy composite10.1016/S0266-3538(02)00129-X ↗
37. Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes10.1016/j.msea.2007.04.043 ↗
38. Mechanical properties and interfacial characteristics of carbon-nanotube-reinforced epoxy thin films10.1063/1.1511532 ↗
39. The rise of graphene10.1038/nmat1849 ↗
40. Synergy in hybrid polymer/nanocarbon composites10.1016/j.compositesa.2015.02.021 ↗
41. Enhanced mechanical properties of nanocomposites at low graphene content10.1021/nn9010472 ↗
42. Interlaminar reinforcement of glass fiber/epoxy composites with graphene nanoplatelets10.1016/j.compositesa.2014.12.010 ↗
43. Graphene-based composite materials10.1038/nature04969 ↗
44. Fracture and fatigue in graphene nanocomposites10.1002/smll.200901480 ↗
45. The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites10.1016/j.carbon.2013.03.050 ↗
46. Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites10.1016/j.carbon.2012.07.021 ↗
47. Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites10.1007/s10853-014-8665-6 ↗
48. Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase10.1016/j.compositesb.2014.10.014 ↗
49. Epoxy clay nanocomposites–processing, properties and applications: a review10.1016/j.compositesb.2012.04.012 ↗
50. Mechanism of reinforcement in a nanoclay/polymer composite10.1016/j.compositesb.2011.03.011 ↗
51. A review on polymer–layered silicate nanocomposites10.1016/j.progpolymsci.2008.07.008 ↗
52. Epoxy resin composites with surface‐modified silicon dioxide nanoparticles: a review10.1002/app.39208 ↗
53. Polymer/silica nanocomposites: preparation, characterization, properties, and applications10.1021/cr068035q ↗
54. Influence of nanoparticles and nanofibers of aluminum oxide on the properties of epoxy composites10.1134/S1087659608020120 ↗
55. Mechanisms leading to improved mechanical performance in nanoscale alumina filled epoxy10.1016/j.compscitech.2008.01.009 ↗
56. Decomposition mechanisms and kinetics of amine/anhydride-cured DGEBA epoxy resin in near-critical water10.1039/C5RA03828F ↗
57. Mechanical reinforcement of polymers using carbon nanotubes10.1002/adma.200501851 ↗
58. Advances in the science and technology of carbon nanotubes and their composites: a review10.1016/S0266-3538(01)00094-X ↗
59. Kim · 1998
60. Recent advances in graphene based polymer composites10.1016/j.progpolymsci.2010.07.005 ↗
61. Synthesis of silica nanoparticles by sol-gel: size-dependent properties, surface modification, and applications in silica-polymer nanocomposites—a review10.1155/2012/132424 ↗
62. Polymer-nanoparticle composites: from synthesis to modern applications10.3390/ma3063468 ↗
63. Surface treatment of titanium for adhesive bonding to polymer composites: a review10.1016/S0143-7496(00)00044-0 ↗
64. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment10.1023/B:JMSC.0000007726.58758.e4 ↗
65. Enhancement of interfacial fracture toughness of carbon/epoxy composite adhesive joints by in-mold surface preparation10.3144/expresspolymlett.2013.26 ↗
66. Landrock · 2008
67. Mode-l fracture behaviour of adhesive joints. Part I. relationship between fracture energy and bond thickness10.1080/00218469508009935 ↗
68. Ebnesajjad · 2013
69. Effect of different carbon nano-fillers on rheological properties and lap shear strength of epoxy adhesive joints10.1016/j.compositesa.2015.12.003 ↗
70. Wegman · 2012
71. Lap shear strength and healing capability of self-healing adhesive containing epoxy/mercaptan microcapsules10.1063/1.4942339 ↗
72. Pre-treatment of AA6060 aluminium alloy for adhesive bonding10.1016/S0143-7496(01)00049-5 ↗
73. Treatment of composite surfaces for adhesive bonding10.1016/0143-7496(93)90036-9 ↗
74. Surface treatment of polymers for adhesive bonding10.1002/app.1967.070110809 ↗
75. Surface pretreatment of plastics for adhesive bonding10.1163/156856195X00248 ↗
76. Flame and silane treatments for improving the adhesive bonding characteristics of aramid/epoxy composites10.1016/j.compstruct.2011.06.002 ↗
77. The effect of surface preparation on the performance of acrylic adhesive joints10.1016/0143-7496(88)90094-2 ↗
78. The dependence of the fatigue life of adhesive joints on surface preparation10.1016/j.ijadhadh.2005.03.006 ↗
79. Use of epoxy/multiwalled carbon nanotubes as adhesives to join graphite fibre reinforced polymer composites10.1088/0957-4484/14/7/316 ↗
80. Monitoring the integrity of adhesive joints during fatigue loading using carbon nanotubes10.1016/j.compscitech.2013.01.020 ↗
81. Failure of CFRP-to-steel double strap joint bonded using carbon nanotubes modified epoxy adhesive at moderately elevated temperatures10.1016/j.compositesb.2016.03.042 ↗
82. Enhancement on mechanical strength of adhesively-bonded composite lap joints at cryogenic environment using coiled carbon nanotubes10.1016/j.compositesb.2016.11.019 ↗
83. Epoxy functionalized multi-walled carbon nanotubes for improved adhesives10.1016/j.carbon.2013.02.061 ↗
84. A multi-wall carbon nanotube-reinforced high-temperature resistant adhesive for bonding carbon/carbon composites10.1016/j.carbon.2012.06.021 ↗
85. Toughening epoxy adhesives with multi-walled carbon nanotubes
86. Graphene-based structural adhesive to enhance adhesion performance10.1039/C5RA00819K ↗
87. The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints10.1016/j.compositesb.2016.05.039 ↗
88. Nano-modified adhesive by graphene: the single lap-loint case10.1590/S1516-14392013005000022 ↗
89. Investigating the effects of reduced graphene oxide additive on the tensile strength of adhesively bonded joints at different extension rates10.1016/j.matdes.2015.12.006 ↗
90. Thermal conductivity and lap shear strength of GNP/epoxy nanocomposites adhesives10.1016/j.ijadhadh.2015.12.012 ↗
91. Mechanical properties and adhesive behavior of epoxy-graphene nanocomposites10.1016/j.ijadhadh.2017.12.004 ↗
92. Synthesis and characterization of epoxy based nanocomposites10.1002/app.22242 ↗
93. Enhanced thermal stability and structural characteristics of different MMT-Clay/epoxy-nanocomposite materials10.1016/j.polymdegradstab.2007.10.005 ↗
94. Organofunctionalized montmorillonite/epoxy nanocomposites: the effect of interlayer cation distribution on mechanical properties10.1002/pc.21019 ↗
95. Comparative studies for the effect of intercalating agent on the physical properties of epoxy resin-clay based nanocomposite materials10.1016/j.eurpolymj.2008.06.015 ↗
96. Epoxy reinforcement with silicate particles: rheological and adhesive properties–Part I: characterization of composites with natural and organically modified montmorillonites10.1016/j.ijadhadh.2015.05.008 ↗
97. Nanocomposite adhesives: mechanical behavior with nanoclay10.1016/j.ijadhadh.2010.09.006 ↗
98. Epoxy reinforcement with silicate particles: rheological and adhesive properties-Part II: characterization of composites with halloysite10.1016/j.ijadhadh.2016.04.005 ↗
99. Development and thermo‐mechanical behavior of nanocomposite epoxy adhesives10.1002/pat.1942 ↗
100. Nachikethas · 2013