An updated review of adhesively bonded joints in composite materials
Source abstract
Abstract
Continuing interest and more developments in recent years indicated that it would be useful to update Banea and da Silva paper entitled “Adhesively bonded joints in composite materials: an overview”. This paper presents an updated review of adhesively bonded joints in composite materials, which covers articles published from 2009 to 2016. The main parameters that affect the performance of bonded joints such as surface treatment, joint configuration, geometric and material parameters, failure mode etc. are discussed. The environmental factors such as pre-bond moisture, moisture and temperature are also discussed in detail and how they affect the durability of adhesive joints. Lots of shortcomings were resolved during the last years by developing new materials, new methods and models. However, there is still a potential to evaluate and identify the best possible combination of parameters which would give the best performance of composite bonded joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Adhesively bonded joints in composite materials: an overview
2. Bonded repair of composite aircraft structures: a review of scientific challenges and opportunities10.1016/j.paerosci.2013.03.003 ↗
3. Composite repair in wind turbine blades: an overview10.1080/00218464.2014.900449 ↗
4. Adhesively bonded connections in the context of timber engineering-a review
5. Smart adhesive joints: an overview of recent developments10.1080/00218464.2013.785916 ↗
6. Adhesives in the footwear industry
7. Methods to increase the toughness of structural adhesives with micro particles: an overview with focus on cork particles10.1002/mawe.201600498 ↗
8. Fatigue in adhesively bonded joints: a review10.5402/2012/746308 ↗
9. Fracture mechanics tests in adhesively bonded joints: a literature review10.1080/00218464.2013.859075 ↗
10. Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: state of the art10.1016/j.compositesb.2015.07.014 ↗
11. Adhesive joints for low- and high-temperature use: an overview10.1080/00218464.2014.943395 ↗
12. Atmospheric pressure plasma processing for polymer adhesion: a review10.1080/00218464.2013.804407 ↗
13. Environmental effect on the fatigue degradation of adhesive joints: a review
14. Design and ageing of adhesives for structural adhesive bonding – a review
15. Analytical models of adhesively bonded joints—Part I: literature survey10.1016/j.ijadhadh.2008.06.005 ↗
16. Analytical models of adhesively bonded joints—Part II:comparative study10.1016/j.ijadhadh.2008.06.007 ↗
17. A review of finite element analysis of adhesively bonded joints10.1016/j.ijadhadh.2011.01.006 ↗
18. A survey of computational models for adhesion10.1080/00218464.2014.1003210 ↗
19. da Silva · 2011
20. da Silva · 2012
21. da Silva · 2011
22. da Silva · 2013
23. Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints10.1016/j.ijadhadh.2009.02.012 ↗
24. Influence of the interface ply orientation on the fatigue behaviour of bonded joints in composite materials10.1016/j.ijfatigue.2009.02.008 ↗
25. Effect of manufacturing methods on the shear strength of composite single-lap bonded joints10.1016/j.compstruct.2009.08.041 ↗
26. The peel ply surface treatment for adhesive bonding of composites: a review10.1016/j.ijadhadh.2013.01.014 ↗
27. Effect of adhesive thickness, adhesive type and scarf angle on the mechanical properties of scarf adhesive joints10.1016/j.ijsolstr.2013.09.005 ↗
28. Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: effect of material and geometrical parameters10.1016/j.ijadhadh.2013.09.044 ↗
29. Curing effects on steel/CFRP double strap joints under combined mechanical load, temperature and humidity10.1016/j.conbuildmat.2012.11.035 ↗
30. Environmental ageing on GFRP pultruded joints: comparison between different adhesives10.1016/j.compstruct.2015.07.067 ↗
31. Effects of laminate carbon/epoxy composite patches on the strength of double-strap adhesive joints: experimental and numerical analysis10.1016/j.matdes.2013.04.037 ↗
32. Effects of composite adherend properties on stresses in double lap bonded joints10.1016/j.matdes.2012.08.001 ↗
33. Strength of carbon/epoxy composite single-lap bonded joints in various environmental conditions10.1016/j.compstruct.2009.09.009 ↗
34. The effects of manufacturing-induced and in-service related bonding quality reduction on the mode-I fracture toughness of composite bonded joints for aeronautical use10.1016/j.compositesb.2012.05.052 ↗
35. Mode I fracture toughness of co-cured and secondary bonded composite joints10.1016/j.ijadhadh.2014.02.008 ↗
36. Mixed-mode fracture toughness of co-cured and secondary bonded composite joints10.1016/j.engfracmech.2014.12.005 ↗
37. Considerations for the industrial application of structural adhesive joints in the aluminium–composite material bonding10.1016/j.compositesb.2012.04.026 ↗
38. Effect of prepreg storage humidity on the mixed-mode fracture toughness of a co-cured composite joint10.1016/j.compositesa.2012.09.010 ↗
39. Adhesive joint strength of hybrid assemblies: titanium sheet-composites and aluminium sheet-composites—Experimental and numerical verification10.1016/j.ijadhadh.2010.05.006 ↗
40. Fracture analysis in adhesive composite material/aluminum joints under mode-I loading; experimental and numerical approaches10.1016/j.ijadhadh.2012.06.005 ↗
41. Influence of metal surface preparation on its surface profile, contact angle, surface energy and adhesion with glass fibre prepreg10.1016/j.ijadhadh.2014.02.006 ↗
42. Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints10.1016/j.ijadhadh.2010.02.007 ↗
43. Surface modification of aircraft used composites for adhesive bonding10.1016/j.ijadhadh.2014.01.004 ↗
44. A review: fibre metal laminates, background, bonding types and applied test methods10.1016/j.matdes.2011.03.011 ↗
45. Adhesive joining of aluminium AA6082: the effects of resin and surface treatment10.1016/j.ijadhadh.2008.01.002 ↗
46. Laser ablation surface preparation for adhesive bonding of carbon fiber reinforced epoxy composites10.1016/j.ijadhadh.2016.02.007 ↗
47. Effect of an atmospheric pressure plasma treatment on the mode I fracture toughness of a co-cured composite joint10.1080/00218464.2013.772053 ↗
48. Analytical characterization of CFRP laser treated by excimer laser radiation10.1016/j.phpro.2013.03.080 ↗
49. Laser surface pre-treatment of CFRP for adhesive bonding in consideration of the absorption behaviour10.1080/00218464.2012.660042 ↗
50. Interface modification of glass fibre–polyester composite–composite joints using peel plies10.1016/j.ijadhadh.2015.01.016 ↗
51. Analysis of the removal of peel ply from CFRP surfaces10.1016/j.compositesb.2015.11.019 ↗
52. Budhe · 2014
53. Effect of Surface Roughness on the Performance of Adhesive Joints Under Static and Cyclic Loading10.1080/00218464.2010.482430 ↗
54. Study on the fatigue strength of AA 6082-T6 adhesive lap joints10.1016/j.ijadhadh.2009.02.009 ↗
55. Effect of grooves on the strength of adhesively bonded joints10.1016/j.ijadhadh.2010.07.005 ↗
56. Influence of mechanical surface treatment on fatigue life of bonded joints
57. Environmental durability of a CFRP system for strengthening steel structures10.1016/j.conbuildmat.2010.02.023 ↗
58. Influence on the strength and aging resistance of aluminium joints by laser pre-treatment and surface modification10.1016/j.ijadhadh.2010.05.009 ↗
59. The influence of mechanical and chemical treatments on the environmental resistance of epoxy adhesive bonds to titanium10.1016/j.ijadhadh.2013.09.012 ↗
60. Optimum adhesive thickness in structural adhesives joints using statistical techniques based on Weibull distribution10.1016/j.ijadhadh.2009.12.003 ↗
61. Effects of adhesive thickness on global and local Mode-I interfacial fracture of bonded joints10.1016/j.ijsolstr.2010.05.006 ↗
62. Strength and interface failure mechanism of adhesive joints10.1016/j.ijadhadh.2011.12.004 ↗
63. Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents – Part I: experiments10.1016/j.compstruct.2012.08.060 ↗
64. Influence of adhesive bond line thickness on joint strength10.1016/j.ijadhadh.2009.03.002 ↗
65. On experimental methods to investigate the effect of layer thickness on the fracture behavior of adhesively bonded joints10.1016/j.ijadhadh.2011.08.004 ↗
66. Effect of adhesive thickness and surface roughness on the shear strength of aluminium one-component polyurethane adhesive single-lap joints for automotive applications10.1080/01694243.2016.1170588 ↗
67. Effect of adhesive thickness on fatigue and fracture of toughened epoxy joints – Part II: analysis and finite element modeling10.1016/j.engfracmech.2010.07.006 ↗
68. Influence of layer thickness on cohesive properties of an epoxy-based adhesive – an experimental study10.1080/00218464.2010.498718 ↗
69. Effects of bondline thickness on Mode-I nonlinear interfacial fracture of laminated composites: an experimental study10.1016/j.compositesb.2012.10.048 ↗
70. Effects of bond gap thickness on the fracture of nano-toughened epoxy adhesive joints10.1016/j.polymer.2012.09.049 ↗
71. Modelling the strength of bonded butt-joints10.1016/j.compositesb.2010.09.002 ↗
72. The effect of adhesive thickness on tensile and shear strength of polyimide adhesive10.1016/j.ijadhadh.2012.03.007 ↗
73. Mode II fracture toughness of a brittle and a ductile adhesive as a function of the adhesive thickness10.1080/00218464.2010.506155 ↗
74. Static and fatigue failure analysis of adhesively bonded thick composite single lap joints10.1016/j.compscitech.2013.06.018 ↗
75. Influence of adhesive thickness on local interface fracture and overall strength of metallic adhesive bonding structures10.1016/j.ijadhadh.2012.07.012 ↗
76. Effect of bondline thickness on the static strength of structural adhesives under nearly-homogeneous shear stresses10.1080/00218464.2011.597309 ↗
77. Mechanical characterization of flexible adhesives10.1080/00218460902881808 ↗
78. Static and fatigue behaviour of room temperature vulcanising silicone adhesives for high temperature aerospace applications10.1002/mawe.201000605 ↗
79. Strength analysis of metallic bonded joints containing defects10.1016/j.commatsci.2011.09.008 ↗
80. The effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive10.1080/00218464.2014.903802 ↗
81. Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs10.1016/j.ijadhadh.2013.12.007 ↗
82. Geometric edge shape based optimization for interfacial shear stress reduction in fiber reinforced polymer plate retrofitted concrete beams. Comp
83. On joint strengths, peel stresses and failure modes in adhesively bonded double-strap and supported single-lap GFRP joints10.1016/j.compstruct.2007.12.005 ↗
84. Parametric study of adhesive joints with composites10.1016/j.ijadhadh.2012.01.019 ↗
85. Effect of the tapered end of a FRP plate on the interfacial stresses in a strengthened beam used in civil engineering applications10.1007/s11029-014-9433-z ↗
86. An experimental study of Flat-Joggle-Flat bonded joints in composite laminates10.1016/j.ijadhadh.2012.02.003 ↗
87. Effect of mixed adhesive joints and tapered plate on stresses in retrofitted beams bonded with a fiber-reinforced polymer plate10.1016/j.matdes.2013.03.052 ↗
88. Experimental study of adhesively bonded CFRP joints subjected to tensile loads10.1016/j.ijadhadh.2014.11.001 ↗
89. Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes10.1016/j.ijadhadh.2008.03.005 ↗
90. Geometrical study of mixed adhesive joints for high temperature applications10.1080/01694243.2015.1121801 ↗
91. Experimental investigation of the influence of substrates' fibers orientations on the impact response of composite double-lap joints10.1016/j.compstruct.2015.08.040 ↗
92. A study on the strength of adhesively bonded joints with different adherends10.1016/j.compositesb.2014.03.001 ↗
93. The effect of the adherend width on the strength of adhesively bonded single-lap joint: experimental and numerical analysis10.1016/j.compositesb.2014.01.022 ↗
94. Evaluating the strengths of thick aluminum-to-aluminum joints with different adhesive lengths and thicknesses10.1016/j.compstruct.2009.08.037 ↗
95. Effect of adherend’s rigidity on the shear strength of single lap adhesive joints10.1016/j.ijadhadh.2010.12.003 ↗
96. Evaluation of fatigue life of adhesively bonded aluminum single-lap joints using interfacial parameters10.1016/j.ijfatigue.2009.07.001 ↗
97. Debonding on command of multi-material adhesive joints
98. Debonding on command of adhesive joints for the automotive industry10.1016/j.ijadhadh.2015.01.014 ↗
99. A review of innovations in disbonding techniques for repair and recycling of automotive vehicles10.1016/j.ijadhadh.2014.01.021 ↗
100. Recent developments in adhesive technology: a review10.1108/01445151111150532 ↗