Development of a Set of Reference Materials for Spectral Analysis of Anisotropic Electrical Steel
Source abstract
Abstract
Abstract A set of solid reference materials of electrical steel with a wide list of standardized impurity and alloying components has been developed for determination of B, C, N, Al total, acid-soluble Al, Si, P, S, Ca, Ti, V, Cr, Mn, Ni, Cu, Nb, Mo, and Sn. The RM set allows one to monitor the accuracy of determination of elements by spectral methods. The consistency and stability of the chemical composition of the set were confirmed, and the error values of the certified elements were evaluated. Using this RM set the linear calibration graphs for determination of all the elements by spark atomic emission spectrometry (SAES) (R2 = 0.9817–0.9998) and X-ray fluorescence spectrometry (XRF) (R2 = 0.8141–0.9999) with detection limits of 0.1–170 and 0.8–18 ppm, correspondingly, were plotted. Using the Wilcoxon statistical criterion, the possibility of joint use of the developed and Czech SPL SST-1A–SST-4A sets for the determination of components by SAES and XRF was demonstrated. The developed set is used in the laboratories of a metallurgical enterprise.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: X-ray Spectroscopy and Fluorescence Analysis · Analytical chemistry methods development · Electron and X-Ray Spectroscopy Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Lobanov, M.L., Redikultsev, A.A., and Zorina, M.A., Metallofizika materialov dlya mashinostroeniya, uchebnoe posobie (Metallophysics of Materials for Mechanical Engineering: Study Guide), Yekaterinburg: Ural Univ., 2019.
2. Sinelnikov, V.A., Vyplavka nizkouglerodistoi elektrotekhnicheskoi stali (Smelting of Low-Carbon Electrotechnical Steel), Moscow: Metallurgiya, 1991.
3. Yakubenko, E.V., Voitkova, Z.A., and Ermolaeva, T.N., Studying the features of solution calibration in the multi-element analysis of structural steels by atomic emission spectrometry with inductively coupled plasma and electric discharge sampling, Zavod. Lab. Diagn. Mater., 2014, vol. 80, no. 10, pp. 7–12.
4. Khodakovskaya, I.V., Popkova, G.N., and Bazianova, V.V., Comparison of methods for certification of stannic, stibium and lead traces in reference materials for steel, Standart. Obr., 2016, no. 3, pp. 32–37. https://doi.org/10.20915/2077-1177-2016-0-3-32-3710.20915/2077-1177-2016-0-3-32-37 ↗
5. Pupyshev, A.A. and Danilova, D.A., Use of atomic emission spectroscopy with inductively coupled plasma for the analysis of materials and products of ferrous metallurgy, Analyt. Kontrol’, 2007, vol. 11. nos. 2-3, pp. 131–181.
6. Popkova, G.N., Bazyanova, V.V., and Shakhova, Yu.N., Determination of aluminum in steel by atomic emission spectrometry with inductively coupled plasma, Zavod. Lab. Diagn. Mater., 2018, vol. 84, no. 1 (2), pp. 49–53. https://doi.org/10.26896/1028-6861-2018-84-1(II)-49-5310.26896/1028-6861-2018-84-1(II)-49-53 ↗
7. Ignatenko, T.I., Tretyakova, M.V., Laschenova, E.A., and Trofimova, A.G., Development of a set of steel certified reference materials ISO UG141-ISO UG146 for calibration of spectrometers, Zavod. Lab. Diagn. Mater., 2023, vol. 89, no. 2, part II, pp. 53–56. https://doi.org/10.26896/1028-6861-2023-89-2-II-53-5610.26896/1028-6861-2023-89-2-II-53-56 ↗
8. Tretiakova, M.V., Ignatenko, T.I., Lashchenova, E.A., and Trofimova, A.G., Elaboration of the new sets of certified reference materials of steels for spectrometry, Zavod. Lab. Diagn. Mater., 2018, vol. 84, no. 1, part II, pp. 33–37. https://doi.org/10.26896/1028-6861-2018-84-1(II)-33-3710.26896/1028-6861-2018-84-1(II)-33-37 ↗
9. Kotlyarevskaya, E.N., Comina, I.G., and Lashchenova, E.A., Study of the accuracy of spectral analysis in determination of aluminum and nickel in steel by the results of inter-laboratory comparative tests, Zavod. Lab. Diagn. Mater., 2018, vol. 84, no. 1, part II, pp. 28–32. https://doi.org/10.26896/1028-6861-2018-84-1(II)-28-3210.26896/1028-6861-2018-84-1(II)-28-32 ↗
10. GOST (State Standard) ISO Guide 33-2019: Reference Materials. Good practice of using reference materials, 2019.
11. Akland, M.I. and Ponosov, V.I., Reference materials and their use, Zavod. Lab. Diagn. Mater., 2018, vol. 84, no. 1, part II, pp. 6–13. https://doi.org/10.26896/1028-6861-2018-84-1(II)-06-1310.26896/1028-6861-2018-84-1(II)-06-13 ↗
12. Stepanovskikh, V.V., Reference materials institute developer and producer of reference materials of raw and metallurgical production materials, Standart. Obr., 2015, no. 3, pp. 3–9.
13. Lutsenko, A.N., Letov, A.F., and Karachevtsev, F.N., Problematic issues of the development of reference materials of composition and properties for aircraft industry, Standart. Obr., 2016, no. 4, pp. 31–41. https://doi.org/10.20915/2077-1177-2016-0-4-31-4110.20915/2077-1177-2016-0-4-31-41 ↗
14. Karachevtsev, F.N., Eroshkin, S.G., and Gorbovets, M.A., Development of the production of standard samples of the composition of alloys at the Natl. Res. Center ‘Kurchatov Institute’—VIAM, Tr. VIAM, 2022, no. 10 (116), pp. 140–148. https://doi.org/10.18577/2307-6046-2022-0-10-140-14810.18577/2307-6046-2022-0-10-140-148 ↗
15. Karachevtsev, F.N., Letov, A.F., Protsenko, O.M., and Yakimova, M.S., Development of reference materials of the composition of aviation alloys, Standart. Obr., 2013, no. 4, pp. 30–34.
16. Eroshkin, S.G. and Dynin, N.V., Experience in the development and production of reference materials of composition of aluminum alloy D1, D16, Tr. VIAM, 2018, no. 2 (62), pp. 30–37. https://doi.org/10.18577/2307-6046-2018-0-2-4-410.18577/2307-6046-2018-0-2-4-4 ↗
17. Karachevtsev, F.N., Eroshkin, S.G., and Mosolov, A.N., Reference material for the spectral analysis of the VSDP-16 aluminum alloy, Etalony. Standart. Obr., 2022, vol. 18, no. 1, pp. 39–50. https://doi.org/10.20915/2077-1177-2022-18-1-39-5010.20915/2077-1177-2022-18-1-39-50 ↗
18. Karachevtsev, F.N., Eroshkin, S.G., Trofimov, N.V., et al., Development of standard samples of magnesium alloy ML19, Tr. VIAM, 2022, no. 1 (107), pp. 26–34. https://doi.org/10.18577/2307-6046-2022-0-1-26-3410.18577/2307-6046-2022-0-1-26-34 ↗
19. Karachevtsev, F.N., Eroshkin, S.G., Mostyaev, I.V., et al., Development of standard samples of magnesium alloys VML20 and VMD16, Tr. VIAM, 2021, no. 5 (99), pp. 39–47. https://doi.org/10.18577/2307-6046-2021-0-5-39-4710.18577/2307-6046-2021-0-5-39-47 ↗
20. Karachevtsev, F.N., Development of certified reference materials of heat resisting nickel alloys for determination of detrimental impurities and rare earth elements by spectral methods, Standart. Obr., 2015, no. 4, pp. 46–55. https://doi.org/10.20915/2077-1177-2015-0-4-46-5510.20915/2077-1177-2015-0-4-46-55 ↗
21. Karachevtsev, F.N. and Titov, V.I., Development of standard samples of the composition of heat-resistant nickel-based alloys for spectral analysis of cathodes used for ion-plasma coatings of GTE working and nozzle blades, Tr. VIAM, 2021, no. 5 (99), pp. 14–22. https://doi.org/10.18577/2307-6046-2021-0-5-14-2210.18577/2307-6046-2021-0-5-14-22 ↗
22. Sprikut, R.V. and Maznichevsky, A.N., Production of the steels of special duty at the 'LASMET' Ltd. for developing reference samples, Zavod. Lab. Diagn. Mater., 2023, vol. 89, no. 2, part II, pp. 39–42. https://doi.org/10.26896/1028-6861-2023-89-2-II-39-4210.26896/1028-6861-2023-89-2-II-39-42 ↗
23. Logunov, A.V., Mikhailov, M.A., and Mikhailov, A.M., Obespechenie vysokogo kachestva litykh zagotovok sovremennykh slozhnolegirovannykh zharoprochnykh nikelevykh splavov (Ensuring High Quality of Cast Blanks of Modern Complex Alloyed Heatresistant Nickel Alloys), Moscow: 2022.
24. Tretyakova, M.V. and Laschenova, E.A., Study of the new set of certified reference materials ICRM ChG50-ICRM ChG55 for spectral analysis of alloyed cast irons, Zavod. Lab. Diagn. Mater., 2018, vol. 84, no. 1, part II, pp. 38–41. https://doi.org/10.26896/1028-6861-2018-84-1(II)-38-4110.26896/1028-6861-2018-84-1(II)-38-41 ↗
25. Tretyakova, M.V., Laschenova, E.A., and Kochergina, E.V., Expansion and optimization of the nomenclature of certified reference materials for spectral analysis of cast irons, Zavod. Lab. Diagn. Mater., 2023, vol. 89, no. 2, part II, pp. 49–52. https://doi.org/10.26896/1028-6861-2023-89-2-II-49-5210.26896/1028-6861-2023-89-2-II-49-52 ↗
26. Karachevtsev, F.N., Letov, A.F., Protsenko, O.M., and Yakimova, M.S., Development of standard samples of the composition of aviation alloys, Standart. Obr., 2013, no. 4, pp. 30–34.
27. STO (Standard of the Organization) 05757665-FL-0072-2020: The quality management system. Evaluation of the activity. Monitoring, measurement, analysis and evaluation of ISO9001: 2015 (9.1.3). Development and certification of reference materials of the company’s composition of substances and materials, Lipetsk: NLMK, 2020.
28. Shcherbakov, E.D. and Lapin, V.P., The effect of deformation aging on the properties of various steel products, Lit’e Metallurg., 2010, no. 3 (57), pp. 216–221.
29. RMG 56-2002: State system for ensuring the uniformity of measurements. Sets of reference materials of composition of substances and materials. Mutual comparison procedure, 2004.
30. Dvoretskov, R.M., Slavin, A.V., Karachevtsev, F.N., and Zagvozdkina, T.N., Comparisons of the nickel alloys VZh172 and VZhL21 reference materials kits using the AES ICP method, Tr. VIAM, 2021, no. 11 (105), pp. 120–132. https://doi.org/10.18577/2307-6046-2021-0-11-120-13210.18577/2307-6046-2021-0-11-120-132 ↗
31. Nalobin, D.P. and Osintseva, E.V., Methods of comparing reference materials of the composition of substances and materials, Standart. Obr., 2006, no. 1 (3), pp. 36–44.
32. Osintseva, E.V., Reference material comparisons: Design of experiment and processing of measurement results, Standart. Obr., 2016, no. 4, pp. 3–14. https://doi.org/10.20915/2077-1177-2016-0-4-3-1410.20915/2077-1177-2016-0-4-3-14 ↗
33. Stepanovskikh, V.V. and Guzeev, L.I., Comparison of domestic and foreign standard samples on the SA-2000 device, Analyt. Kontrol’, 2000, vol. 4, no. 3, pp. 293–297.
34. MI 3257-2009 GSI: Standard samples of materials (substances). The method of mutual comparison, 2009.
35. Kendall, M.G. and Stuart, A., The Advanced Theory of Statistics, vol. 2: Inference and Relationship, London: Charles Griffin, 1961.