journal article·2026-06-08

Drying shrinkage properties of one-part geopolymer prepared by mechanochemistry

Jiasui Wang, Jin Chai Lee, Surong Luo, Yanran Shen, Xuefang Wang, Wenda Wu

Publisher page

Abstract

The large drying shrinkage of geopolymer seriously hinders its industrial production and application. In this study, mechanochemical processing was introduced into the one-part geopolymer to alleviate its drying shrinkage. The effects of ball-to-powder ratios, ball milling duration and steam time on the mechanical properties and drying shrinkage of one-part geopolymer were investigated. The drying shrinkage mitigation mechanism was explained by testing hydration products, pore structure and infrared spectroscopy. The results indicated that by extending the ball milling time and increasing the ball-to-powder ratios, the macropore volume and total porosity were significantly reduced, and the mechanical strength of the one-part geopolymer was enhanced (28 days compressive strength was about 22.2% higher than that of the simple mixed group). However, as the pore size distribution of the mortars becomes finer, drying shrinkage and mass loss exhibited the opposite trend. In addition, steam curing significantly enhanced the early compressive strength of one-part geopolymer mortar and simultaneously reduced the drying shrinkage rate (the drying shrinkage rate at 56 days was approximately 79.5% lower than that of the specimens without steam curing).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Minnan Science and Technology College School of Civil Engineering, , Quanzhou, ; College of Civil Engineering, Fuzhou University, Fuzhou, China; Faculty of Engineering, Technology and Built Environment, UCSI University, Kuala Lumpur, Malaysia

UCSI University Faculty of Engineering, Technology and Built Environment, , Kuala Lumpur,

Fuzhou University College of Civil Engineering, , Fuzhou,

Funding

National Youth Science Fund Project of National Natural Science Foundation of China

References (49)

Show source-provided references
1. Resistance of geopolymer and Portland cement based systems to silage effluent attack10.1016/j.cemconres.2016.11.015 ↗
2. Sustainable concrete: building a greener future10.1016/j.jclepro.2018.07.123 ↗
3. Effect of elevated temperature curing on properties of alkali-activated slag concrete10.1016/S0008-8846(99)00143-X ↗
4. Shrinkage-reducing admixtures and early-age desiccation in cement mortars and mortars10.1016/S0008-8846(01)00519-1 ↗
5. Geopolymer green technology
6. Effect of pore size distribution on drying shrinking of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
7. Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties10.1039/C6RA03667H ↗
8. Designing precursors for geopolymer cements10.1111/j.1551-2916.2008.02787.x ↗
9. Mechanochemistry for synthesis10.1002/anie.201906755 ↗
10. FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H10.1007/s10971-007-1643-6 ↗
11. Effect on fresh C-S-H gels of the simultaneous addition of alkali and aluminium10.1016/j.cemconres.2009.08.004 ↗
12. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
13. Properties and microstructure of alkali-activated slag cement cured at below- and about-normal temperature10.1016/j.conbuildmat.2014.12.068 ↗
14. Drying shrinkage of alkali-activated cements: effect of humidity and curing temperature10.1617/s11527-019-1430-1 ↗
15. Effect of dosage of sodium carbonate on the strength and drying shrinkage of sodium hydroxide based alkali-activated slag mortars10.1016/j.conbuildmat.2018.05.194 ↗
16. Chemical acceleration of a neutral granulated blast-furnace slag activated by sodium carbonate10.1016/j.cemconres.2015.02.014 ↗
17. Mechanical activation of fly ash: effect on reaction, structure and properties of resulting geopolymer
18. Microstructural changes in alkali-activated slag mortars induced by accelerated carbonation10.1016/j.cemconres.2017.07.008 ↗
19. Mitigating the autogenous shrinkage of alkali-activated slag by metakaolin10.1016/j.cemconres.2019.04.016 ↗
20. Mechanisms of drying shrinkage for alkali-activated slag/metakaolin composite materials
21. Effect of metakaolin on the autogenous shrinkage of alkali-activated slag-fly ash mortars10.1016/j.conbuildmat.2021.122397 ↗
22. Research on the mechanochemical effects of co-grinding kaolin and aluminium hydroxide
23. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
24. Comparison of two alkali-activated systems: Mechanically activated fly ash and fly ash-blast furnace slag blends10.1016/j.proeng.2015.06.142 ↗
25. Mechanochemical synthesis of one-part alkali aluminosilicate hydraulic cement
26. Drying shrinkage of alkali activated binders cured at room temperature10.1016/j.conbuildmat.2018.12.223 ↗
27. JGJ/T 70-2009: Standard for test method of basic properties of construction mortar
28. JC/T 603-2004: Standard test method for drying shrinkage of mortar
29. Structural collapse in phlogopite mica-rich mine tailings induced by mechanochemical treatment and implications to alkali activation potential10.1016/j.mineng.2020.106331 ↗
30. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
31. New rapid setting alkali activated cement compositions10.1557/PROC-179-203 ↗
32. GB/T 25181-2019: Ready-mixed mortar
33. GB/T 17671-2021: Test method for cement mortar strength (ISO method)
34. Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete10.1016/j.matdes.2014.06.059 ↗
35. Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete10.1016/j.conbuildmat.2016.05.008 ↗
36. Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature10.1016/j.jmatprotec.2009.03.016 ↗
37. On drying shrinkage in alkali-activated concrete: improving dimensional stability by aging or heat-curing10.1016/j.cemconres.2016.10.003 ↗
38. Predictions of long-term deflection of geopolymer concrete beams10.1016/j.conbuildmat.2015.06.030 ↗
39. Microstructure and durability of alkali-activated materials as key parameters for standardization
40. Using mechanical activation of quartz to enhance the compressive strength of metakaolin based geopolymers10.1016/j.cemconcomp.2020.103635 ↗
41. Effect of mechanical activation on reaction mechanism of one-part preparation fly ash/slag-based geopolymer10.1680/jadcr.21.00033 ↗
42. Wittmann · 1982 · 129
43. Exothermic behavior and drying shrinkage of alkali-activated slag concrete by low temperature-preparation method10.1016/j.conbuildmat.2020.120056 ↗
44. Research progress on the synthesis of inorganic materials by mechanochemical method
45. The effect of activators on the mechanical properties and microstructure of alkali-activated nickel slag
46. Mechanical force chemical processes and effects (I) – mechanical force chemical effects
47. Processes and effects of mechanochemistry (II) – processes and application of mechanochemistry
48. Shrinkage mechanisms of alkali-activated slag10.1016/j.cemconres.2016.07.001 ↗
49. Shrinkage compensation of alkali-activated slag concrete and microstructural analysis10.1016/j.conbuildmat.2014.05.085 ↗