journal article·2025-09-08

Synergistic effect of sodium metasilicate and sodium fluorosilicate in an accelerator on cement hydration

Jiawei Wang, Zhihong Wu, Chunmei Li, Yuexin Pan, Jin Wang, Junlong Qiu, Shufang Ren, Hongjin Xu

Advances in Cement Research· Volume 37· Issue 9
Publisher page

Abstract

The liquid accelerator plays a vital role in shotcrete construction. Now, liquid accelerators exhibit several serious issues, including slow setting times, low late-stage strength and high preparation costs. Despite the availability of various types of liquid accelerators on the market, addressing these issues remains challenging. In this study, a low-alkali liquid accelerator (SLA) is prepared using the water bath heating method. This accelerator promotes the setting and hardening of cement and improves late-stage strength through the synergistic effect of low dosages of sodium fluorosilicate (SF) and sodium silicate (SS), while also reducing the preparation costs. At a dosage of 7% SLA, the cement paste achieves a final setting time of 3 min 30 s. The 1 day compressive strength of the mortar reaches 9.5 MPa, and the 28 day compressive strength is 7% higher than the control sample. It is found that the synergistic effect of SS and SF generates silicon dioxide gels and C–S–H gels while creating an alkaline environment that promotes the dissolution of the coating layer of hydration products and silicate mineral phases. Thus, SLA prepared through the synergistic action of SS and SF effectively overcomes the shortcomings of liquid accelerators.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Graphite, nuclear technology, radiation studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Xi’an University of Architecture and Technology Master’s student, College of Materials Science and Engineering, , Xi’an, PR

Xi’an University of Architecture and Technology Associate Professor, College of Materials Science and Engineering, , Xi’an, PR

Shandong Water Conservancy Vocational College Lecturer, Department of Architectural Engineering, , Rizhao, PR

Shanxi Tong Zhi Ning New Materials Co., Ltd Technical Supervisor, , Xi’an, PR

Shanxi ZTS Construction Co., Ltd Engineering Branch Technical Supervisor, Department of Technology Research and Development, , Yuncheng, PR

Funding

National Natural Science Foundation of China · Basic Research Fund project of Xi’an University of Architecture and Technology

References (32)

Show source-provided references
1. Characterization of white Portland cement hydration and the C–S–H structure in the presence of sodium aluminate by 27Al and 29Si MAS NMR spectroscopy10.1016/j.cemconres.2003.10.009 ↗
2. Effect of sodium fluorosilicate on the properties of Portland cement10.1016/j.joen.2012.03.013 ↗
3. Effect of polymer fibers recycled from waste tires on properties of wet-sprayed concrete10.1016/j.conbuildmat.2018.04.229 ↗
4. Preparation and application of low rebound liquid alkali-free accelerator for shotcrete10.1016/j.conbuildmat.2022.130220 ↗
5. Sealing of cracks in cement using microencapsulated sodium silicate10.1088/0964-1726/25/8/084005 ↗
6. Influence of sodium aluminate on cement hydration and concrete properties10.1016/j.conbuildmat.2014.04.089 ↗
7. Effect of alkali content in cement on its hydration kinetics and mechanical properties10.1016/j.conbuildmat.2019.116833 ↗
8. Effect of AlF3 production waste on the processes of hydration and hardening of the alkali-activated Portland cement with sodium silicate hydrate10.1007/s10973-019-08086-y ↗
9. Effect of aluminum sulfate on the hydration of Portland cement, tricalcium silicate and tricalcium aluminate10.1016/j.conbuildmat.2019.117179 ↗
10. Synergistic use of sodium bicarbonate and aluminum sulfate to enhance the hydration and hardening properties of Portland cement paste10.1016/j.conbuildmat.2021.124248 ↗
11. The performance and mechanism analysis of cement pastes added to aluminum sulfate-based low-alkali setting accelerator10.1155/2017/8906708 ↗
12. Utilization of pretreated fly ash to enhance the chloride binding capacity of cement-based material10.1016/j.conbuildmat.2018.04.178 ↗
13. Effect of triisopropanolamine on compressive strength and hydration of cement-fly ash paste10.1016/j.conbuildmat.2018.05.117 ↗
14. Effects of setting regulators on the efficiency of an inorganic acid based alkali-free accelerator reacting with a Portland cement10.1016/j.cemconres.2007.01.002 ↗
15. Effect of sodium sulfate and nano-SiO2 on hydration and microstructure of cementitious materials containing high volume fly ash under steam curing10.1016/j.conbuildmat.2017.12.159 ↗
16. Chemical activation of calcium aluminate cement composites cured at elevated temperature10.1016/j.cemconcomp.2012.08.002 ↗
17. Preparation of alkali-free liquid accelerator based on aluminum sulfate and its accelerating mechanism on the hydration of cement pastes10.1016/j.conbuildmat.2020.119246 ↗
18. Interactions between inorganic surface treatment agents and matrix of Portland cement-based materials10.1016/j.conbuildmat.2016.03.091 ↗
19. Hydration effect of sodium silicate on cement slurry doped with xanthan10.1016/j.conbuildmat.2019.07.327 ↗
20. Effect and mechanism of sodium fluosilicate on setting time of cement10.4028/www.scientific.net/MSF. 898.1978 ↗
21. Effect of sodium silicate on Portland cement/calcium aluminate cement/gypsum rich-water system: strength and microstructure10.1039/c8ra09901d ↗
22. Test and simulation of cement hydration degree for shotcrete with alkaline and alkali-free accelerators10.1016/j.cemconcomp.2020.103684 ↗
23. Accelerators for shotcrete – chemical composition and their effects on hydration, microstructure and properties of cement-based materials10.1016/j.conbuildmat.2021.122557 ↗
24. The influence of alkali-free shotcrete accelerators on early age hydration and property development within cement systems10.3390/ma15196907 ↗
25. Formulation of an alkali-free accelerator and its effects on hydration and mechanical properties of Portland cement10.1016/j.cemconcomp.2022.104485 ↗
26. Preparation and hydration mechanism of aluminum formate/aluminum sulfate based alkali-free composite accelerator for sprayed concrete10.1088/2053-1591/ac6b1a ↗
27. Acceleration of Portland cement with lithium, sodium and potassium silicates and hydroxides10.1016/j.matchemphys.2019.122608 ↗
28. Effect of aluminum sulfate alkali-free liquid accelerator with compound alkanol lamine on the hydration processes of Portland cement10.1016/j.conbuildmat.2021.125101 ↗
29. Preparation of alkali free liquid accelerator for shotcrete with fluorosilicic acid waste liquid and its accelerating mechanism10.1016/j. cemconcomp.2022.104600 ↗
30. Enhanced hydration and mechanical properties of cement-based materials with steel slag modified by water glass10.1016/j.jmrt. 2022.10.001 ↗
31. Effect of sodium carbonate and sodium phosphate on hydration of cement paste10.1016/j.jobe.2021.103577 ↗
32. Development of a novel type of liquid accelerator based on aluminum sulfate and its accelerating mechanism for cement hydration10.1061/jmcee7.Mteng-16404 ↗