Sacrificial Elements for Corrosion Detection in Reinforced Concrete

1. Brown, R. E.; Brain, J. D.; and Wang, N., “The Avian Respiratory System: A Unique Model for Studies of Respiratory Toxicosis and for Monitoring Air Quality,” Environmental Health Perspectives, V. 105, No. 2, Feb. 1997, pp. 188-200. doi: 10.1289/ehp.9710518810.1289/ehp.97105188 ↗

2. K. Eschner, “The Story of the Real Canary in the Coal Mine,” Smithsonian Magazine, Dec. 2016.

3. Burrell, G. A., “The Use of Mice and Birds for Detecting Carbon Monoxide After Mine Fires and Explosions,” U. S. Department of the Interior, Bureau of Mines, Washington, DC, 1914.

4. Neikirk, D. P.; Wood, S. L.; Pasupathy, P.; and Abu Yosef, A., “Corrosion Detection Sensor Embedded within a Concrete Structure with a Diffusion Layer Placed Over the Sacrificial Transducer,” U.S. Patent No. 9,581,559, Feb. 28, 2017.

5. Abu Yosef, A. E.; Pasupathy, P.; Wood, S. L.; and Neikirk, D. P., “Low-Cost Passive Sensors for Monitoring Corrosion in Concrete Structures,” Proceedings Volume 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011, H. F. Wu, ed., SPIE, San Diego, CA, 2011.10.1117/12.879893 ↗

6. Abu Yosef, A., “Development of Non-Contact Passive Wireless Sensors for Detection of Corrosion in Reinforced Concrete Bridge Decks,” PhD dissertation, The University of Texas at Austin, Austin, TX, 2013, 358 pp.

7. Abu-Yosef, A. E.; Pasupathy, P.; Wood, S. L.; and Neikirk, D. P., “Detection of Multiple Corrosion Thresholds in Reinforced Concrete Structures Using Passive Sensors,” Proceedings Volume 8347, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2012, A. L. Gyekenyesi, ed., SPIE, San Diego, CA, 2012.10.1117/12.915164 ↗

8. ACI Committee 222, “Guide to Protection of Metals in Concrete against Corrosion (ACI 222R-19),” American Concrete Institute, Farmington Hills, MI, 2019, 60 pp.

9. Bertolini, L.; Elsener, B.; Pedeferri, P.; Redaelli, E.; and Polder, R. B., Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair, John Wiley & Sons, Inc., New York, 2013, 434 pp.10.1002/9783527651696 ↗

10. Poursaee, A., and Hansson, C. M., “Potential Pitfalls in Assessing Chloride-Induced Corrosion of Steel in Concrete,” Cement and Concrete Research, V. 39, No. 5, May 2009, pp. 391-400. doi: 10.1016/j.cemconres.2009.01.01510.1016/j.cemconres.2009.01.015 ↗

11. Abu Yousef, A.; Pasupathy, P.; Wood, S. L.; and Neikirk, D. P., “Resonant Sensors for Detecting Corrosion in Concrete Bridges,” Trasportation Research Record: Journal of the Transportation Research Board, V. 2201, No. 1, 2010, pp. 19-26. doi: 10.3141/2201-0310.3141/2201-03 ↗

12. Poursaee, A., and Hansson, C. M., “Reinforcing Steel Passivation in Mortar and Pore Solution,” Cement and Concrete Research, V. 37, No. 7, July 2007, pp. 1127-1133. doi: 10.1016/j.cemconres.2007.04.00510.1016/j.cemconres.2007.04.005 ↗

13. Poursaee, A., “Corrosion of Steel Bars in Saturated Ca(OH)2 and Concrete Pore Solution,” Concrete Research Letters, V. 1, No. 3, 2010.

14. Moreno, M.; Morris, W.; Alvarez, M. G.; and Duffó, G. S., “Corrosion of Reinforcing Steel in Simulated Concrete Pore Solutions: Effect of Carbonation and Chloride Content,” Corrosion Science, V. 46, No. 11, Nov. 2004, pp. 2681-2699. doi: 10.1016/j.corsci.2004.03.01310.1016/j.corsci.2004.03.013 ↗

15. Mammoliti, L. T.; Brown, L. C.; Hansson, C. M.; and Hope, B. B., “The Influence of Surface Finish of Reinforcing Steel and pH of the Test Solution on the Chloride Threshold Concentration for Corrosion Initiation in Synthetic Pore Solutions,” Cement and Concrete Research, V. 26, No. 4, Apr. 1996, pp. 545-550. doi: 10.1016/0008-8846(96)00018-X10.1016/0008-8846(96)00018-X ↗

16. Li, L., and Sagüés, A. A., “Effect of Chloride Concentration on the Pitting and Repassivation Potentials of Reinforcing Steel in Alkaline Solutions,” Corrosion, Paper No. 567, 1999, 11 pp.10.5006/C1999-99567 ↗

17. Goñi, S., and Andrade, C., “Synthetic Concrete Pore Solution Chemistry and Rebar Corrosion Rate in the Presence of Chlorides,” Cement and Concrete Research, V. 20, No. 4, July 1990, pp. 525-539. doi: 10.1016/0008-8846(90)90097-H10.1016/0008-8846(90)90097-H ↗

18. Ogunsanya, I. G., and Hansson, C. M., “Detection of the Critical Chloride Threshold of Carbon Steel Rebar in Synthetic Concrete Pore Solutions,” RILEM Technical Letters, V. 3, 2018, pp. 75-83. doi: 10.21809/rilemtechlett.2018.7010.21809/rilemtechlett.2018.70 ↗

19. Thompson, N. G., and Payer, J. H., DC Electrochemical Test Methods (Corrosion Testing Made Easy), NACE International, Houston, TX, 1998, 124 pp.

20. Tait, W. S., An Introduction to Electrochemical Corrosion Testing for Practicing Engineers and Scientists, PairODocs Publications, Racine, WI, 1994.

21. Saremi, M., and Mahallati, E., “A Study on Chloride-Induced Depassivation of Mild Steel in Simulated Concrete Pore Solution,” Cement and Concrete Research, V. 32, No. 12, Dec. 2002, pp. 1915-1921. doi: 10.1016/S0008-8846(02)00895-510.1016/S0008-8846(02)00895-5 ↗

22. Poursaee, A., “Determining the Appropriate Scan Rate to Perform Cyclic Polarization Test on the Steel Bars in Concrete,” Electrochimica Acta, V. 55, No. 3, Jan. 2010, pp. 1200-1206. doi: 10.1016/j.electacta.2009.10.00410.1016/j.electacta.2009.10.004 ↗

23. Pourbaix, M., Lectures on Electrochemical Corrosion, Plenum Press, New York, 1973.10.1007/978-1-4684-1806-4 ↗

24. Blanco, G.; Bautista, A.; and Takenouti, H., “EIS Study of Passivation of Austenitic and Duplex Stainless Steels Reinforcement in Simulated Pore Solutions,” Cement and Concrete Composites, V. 28, No. 3, Mar. 2006, pp. 212-219. doi: 10.1016/j.cemconcomp.2006.01.01210.1016/j.cemconcomp.2006.01.012 ↗

25. González, J. A.; Miranda, J. M.; Otero, E.; and Feliu, S., “Effect of Electrochemically Reactive Rust Layers on the Corrosion of Steel in Ca(OH)2 Solution,” Corrosion Science, V. 49, No. 2, Feb. 2007, pp. 436-448. doi: 10.1016/j.corsci.2006.04.01410.1016/j.corsci.2006.04.014 ↗

26. ASTM C1152/C1152M-04(2012)e1, “Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete,” ASTM International, West Conshohocken, PA, 2012.

27. Jones, D. A., Principles and Prevention of Corrosion, Prentice Hall, Hoboken, NJ, 1996, 572 pp.

28. Foroulis, Z. A., and Uhlig, H. H., “Effect of Cold-Work on Corrosion of Iron and Steel in Hydrochloric Acid,” Journal of the Electrochemical Society, V. 111, No. 5, Jan. 1964, pp. 522-528. doi: 10.1149/1.242617210.1149/1.2426172 ↗